2-43 www.adlinktech.com
Features
■ Supports a 32-bit 5 V PCI bus (PCI-7200)
■ x1lanePCIExpress® interface (PCIe-7200)
■ 32-CH TTL digital inputs and 32-CH TTL digital outputs
■ Up to 12 MB/s transfer rate
■ Bus-mastering DMA for both digital inputs and outputs
■ Onboard programmable timer pacer clock
■ Supports handshaking digital I/O transfer mode
■ Multiple programmable interrupt sources
■ 5 V power available on connectors
■ Compact,half-sizePCB(PCI-7200/PCIe-7200)
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■ Driver Support
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB
®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
12 MB/s High-Speed 32-CH DI & 32-CH DO Cards
PCI/PCIe-7200
Terminal Boards & Cables
PCI/PCIe-7200:
■ DIN-37D-01
Terminal Board with One 37-pin D-sub Connector
and DIN-Rail Mounting (Cables are not included.)
■ ACLD-9137-01
General-Purpose Terminal Board with One 37-pin
D-sub Male Connector
■ ACLD-9137F-01
General-Purpose Terminal Board with One 37-pin
D-sub Female Connector
■ ACL-10137-1MM
37-pin D-sub male/male cable, 1 M
■ ACL-10137-1MF
37-pin D-sub male/female cable, 1 M
* For more information on mating cables, please refer to P2-61/62.
General Specifications
■
I/O connector
• PCI/PCIe-7200
-37-pin D-sub female
-40-pin Header
■
Operating temperature: 0˚C to 60˚C
■
Storage temperature: -20˚C to 80˚C
■
Relative humidity: 5% to 95%, non-condensing
■
Power requirements
■
Dimensions (not including connectors)
• 148 mm x 102 mm (PCI/PCIe-7200)
Ordering Information
■ PCI-7200
12 MB/s High-Speed 32-CH DI & 32-CH DO Card
■ PCIe-7200
12 MB/s High-Speed 32-CH DI & 32-CH DO
PCI Express® card
High-Speed DIO
Pin Assignment
DI16
DI17
DI18
DI19
DI20
DI21
DI22
DI23
DI24
DI25
DI26
DI27
DI28
DI29
DI30
DI31
+5Vout
O-ACK
O-REQ
N/C
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
DO16
DO17
DO18
DO19
DO20
DO21
DO22
DO23
DO24
DO25
DO26
DO27
DO28
DO29
DO30
DO31
GND
O-TRG
N/C
N/C
CN1
PCI/PCIe-7200
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
DI0
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
DI9
DI10
DI11
DI12
DI13
DI14
DI15
+5Vout
I-ACK
I-REQ
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
DO0
DO1
DO2
DO3
DO4
DO5
DO6
DO8
DO7
DO9
DO10
DO11
DO12
DO13
DO14
DO15
GND
I-TRG
CN2
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
PCI-7200
Specifications
Digital I/O
■
Number of channels:
• 32-CH digital inputs
• 32-CH digital outputs
■
Compatibility: 5 V/TTL
■
Data transfer rate
• 12 MB/s with external 3 MHz clock, handshaking
or external strobe
• 8 MB/s with internal 2 MHz timer pacer
■
Digital logic levels
• Input high voltage: 2-5.25 V
• Input low voltage: 0-0.8 V
• Output high voltage: 2.7 V minimum
• Output low voltage: 0.5 V maximum
■
Output driving capacity
• Source current: 3.0 mA
• Sink current: 24 mA
■
Data transfers:
• programmed I/O, interrupt, bus-mastering DMA
Programmable Counter
■
Base clock: 4 MHz
■
Timer 0: DI clock source
■
Timer 1: DO clock source
■
Timer 2: Base clock source of timer 0 & 1
Interrupt
■
Sources:
EO_ACK, EI_REQ, Timer 0, Timer 1 or Timer 2
PCIe-7200
Introduction
ADLINK’s PCI/PCIe-7200 are high-speed digital I/O cards consisting of 32 digital input channels, and 32 digital output
channels. High-performance designs and the state-of-the-art technology make these cards suitable for high-speed
data transfer and pattern generation applications.
The PCI/PCIe-7200 performs high-speed data transfers using bus-mastering DMA via 32-bit PCI bus architecture.
The maximum data transfer rates can be up to 12 MB per second. Several digital I/O transfer modes are supported,
such as direct programmed I/O control, timer pacer control, external clock mode and handshaking mode. They are
very suitable for interfacing high-speed peripherals with your computer system.
Device
PCI-7200
PCIe-7200
Power Consumption
5 V @ 720 mA typical
12 V @ 200 mA
3.3 V @ 500 mA
Updated 03-28, 2012. ©2012 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
