MSFC130
MSFC130-Rev0 www.microsemi.com
Oct, 2011 2/4
◆Thyristor
Maximum Ratings
Thermal Characteristics
Symbol Item Conditions Values Units
Rth(j-c) Thermal Impedance, max. Junction to Case 0.18 ℃/W
Rth(c-s) Thermal Impedance, max. Case to Heatsink 0.10 ℃/W
Electrical Characteristics
Symbol Item Conditions Values Units
ITAV Average On-State Current Sine 180o;Tc=85℃ 130 A
ITSM Surge On-State Current TVJ =45℃ t=10ms, sine
TVJ =125℃ t=10ms, sine
4700
4000 A
i2t Circuit Fusing Consideration TVJ =45℃ t=10ms, sine
TVJ =125℃ t=10ms, sine
110000
80000 A2s
Visol Isolation Breakdown Voltage(R.M.S) a.c.50HZ;r.m.s.;1min 3000 V
Tvj Operating Junction Temperature -40 to +130 ℃
Tstg Storage Temperature -40 to +125 ℃
Mt Mounting Torque To terminals(M6) 3±15% Nm
Ms To heatsink(M6) 5±15% Nm
di/dt Critical Rate of Rise of On-State
Current
TVJ= TVJM , 2/3VDRM ,IG =500mA
Tr<0.5us,tp>6us 200 A/us
dv/dt Critical Rate of Rise of Off-State
Voltage, min. TJ=TVJM ,2/3VDRM linear voltage rise 1000 V/us
a Maximum allowable acceleration 50 m/s2
Values
Symbol Item Conditions Min. Typ. Max. Units
VTM Peak On-State Voltage, max. T=25℃ I
T =500A 1.8 V
IRRM/IDRM
Repetitive Peak Reverse Current,
max. / Repetitive Peak Off-State
Current, max.
TVJ=TVJM ,VR=VRRM ,VD=
VDRM 40 mA
VTO On state threshold voltage
For power-loss
calculations only
(TVJ =125℃)
1 V
rT Value of on-state
slope resistance. max TVJ =TVJM 1.6 mΩ
VGT Gate Trigger Voltage, max. TVJ =25℃ , VD =6V 3 V
IGT Gate Trigger Current, max. TVJ =25℃ , VD =6V 150 mA
VGD Non-triggering gate voltage, max. TVJ=125℃,VD =2/3VDRM 0.25 V
IGD Non-triggering gate current, max. TVJ =125℃, VD =2/3VDRM 10 mA
IL Latching current, max. TVJ =25℃ , RG = 33 Ω 300 1000 mA
IH Holding current, max. TVJ =25℃ , VD =6V 150 400 mA
tgd Gate controlled delay time TVJ=25℃,
IG=1A, diG/dt=1A/us 1 us
tq Circuit commutated turn-off time TVJ =TVJM 100
us