SMT Common Mode Chokes 1.0A to 20.0A Wide variety of package sizes available 1Arms to 20Arms current rating Inductances from 61uH to 10mH 1500Vrms Hi-pot Electrical Specifications at 25 deg C Temp Range -40 C to 125 C 4 PA2742NL Inductance per Winding (uH +30%/-35%) 397 PA2741NL 94 1.1 30 0.3 Low Shasta 9.1 x 8.9 x 3.8 PA2752NL 10150 1.4 210 25 LCCI-50 19.6 x 17.0 x 9.9 PA2748NL 1125 1.8 55 3 Polecat 12.7 x 13.2 x 5.6 PA3927NL 800 3 27 1.5 Polecat 13x13x8.6 PA2743NL 383* 3.3 18 1 Polecat 13.0 x 13.0 x 5.6 PA2749NL 536 3.8 17.1 1.2 LCCI-37 16.4 x 14.2 x 8.9 PA2744NL 280 4 13.2 0.7 Polecat 13.0 x 13.0 x 5.6 PA2751NL 486 4.2 16 1 LCCI-44LP 18.2 x 15.0 x 7.6 PA2745NL 130* 5 6.75 0.4 Polecat 13.2 x 13.2 x 5.6 PA2746NL 96* 6 4.3 0.25 Polecat 13.2 x 13.2 x 5.6 PA2750NL 400 6 9.4 1.25 LCCI-44 18.2 x 15.0 x 10.0 PA2747NL 61* 7 2.9 0.15 Polecat 13.5 x 13.5 x 5.6 PA2756NL 484 8 7.7 1.5 LCCI-50 19.6 x 17.0 x 9.9 PA2757NL 1030 9 9.75 3 HCCI-80 31.0 x 25.4 x 12.7 PA2754NL 215 10 3.75 0.5 Makeni 21.1 x 19.1 x 11.2 PA2753NL 95 12.5 3 0.15 LCCI-50 19.6 x 17.0 x 9.9 PA2755NL 117 14 1.95 0.3 Makeni 21.1 x 19.1 x 11.2 PA2670NL 500 16 4.25 1.5 HCCI-80 31.0x25.4x12.7 PG1265NL 380 20 4.1 1.2 HCCI-80 31.0x25.4x12.7 Part Number Irated1 (Arms or Adc) DCR per Winding (m Max) Leakage Inductance (uH Min) Package Name 1 92 0.6 High Shasta Package Size LxWxH (mm Max) 9.1 x 8.9 x 7.9 NOTE: 1. The current rating (Irated) is based upon the temperature rise of the component and represents the rms current which will cause a typical temperature rise of 55C with 50LFM forced cooling 2. The temperature of the component (ambient plus temperature rise) must be within the stated operating temperature range. 3. Optional Tape & Reel packaging can be ordered by adding a "T" suffix to the part number (i.e. PA2741NL becomes PA2741NLT). Pulse complies to industry standard tape and reel specification EIA481. 4. Components identified by an asterisk have an inductance tolerance of +/- 35%. All other components are +30/-35%. 5. Parts marked with the AEC-Q200 symbol are AEC-Q200 qualified. Parts not identified as AEC-Q200 are still under test. 1 power.pulseelectronics.com P688.N (05/19) http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Impedance Plots 700 Impedance (ohms) 600 500 400 300 200 100 0 0.1 1 10 Frequency (MHz) 100 PA2741NL PA2745NL PA2746NL PA2753NL PA2754NL PA2755NL PA2747NL Impedance (ohms) 3500 3000 2500 2000 1500 1000 500 0 0.1 1 10 100 Frequency (MHz) 2 PA2742NL PA2743NL PA2744NL PA2748NL PA2750NL PA2751NL PA2756NL PA2757NL power.pulseelectronics.com P688.N (05/19) PA2749NL http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Impedance Plots 3500 3000 2500 2000 1500 1000 500 0 0.1 1 10 PA2670NL PA3927NL 100 PG1265NL Impedance (ohms) 30000 25000 20000 15000 10000 5000 0 0.1 1 10 100 Frequency (MHz) PA2752NL 3 power.pulseelectronics.com P688.N (05/19) http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Mechanicals Low Shasta - PA2741NL High Shasta - PA2742NL Schematic Schematic Please note that for PA2741NL and PA2742NL the part should be connected as follows: Customer to connect pins (1,2) and (4,3) together on board to form a single winding (1,2-4,3). Customer to connect pins (8,7) and (5,6) together on board to form a single winding (8,7-5,6) All ratings (leakage and DCR) are with respect to the above winding configuration. PoleCat - PA2743NL, PA2744NL, PA2745NL, PA2746NL, PA2747NL , PA2748NL and PA3927NL A Schematic B Z X 4 power.pulseelectronics.com Y P688.N (05/19) Polecat Dimensions Part Number A B X Y Z PA2743NL 13.0 13.0 8.4 10.4 5.6 PA2744NL 13.0 13.0 8.4 10.4 5.6 PA2745NL 13.2 13.2 8.6 10.7 5.6 PA2746NL 13.2 13.2 8.6 10.7 5.6 PA2747NL 13.5 13.5 8.6 10.7 5.6 PA2748NL 12.7 13.2 8.4 10.4 5.6 PA3927NL 13.0 13.0 8.4 10.4 8.6 http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Mechanicals LCCI-37 - PA2749NL LCCI-44 - PA2750NL 14.22 14.99 8.6 9.4 15.49 13.46 10.0 8.9 13.21 15.24 0,127 18.16 MAX 16.4 MAX Schematic Schematic LCCI-50 - PA2752NL LCCI-44LP - PA2751NL 14.99 15.0 MAX 17.02 9.4 11.3 15.49 16.76 9.91 7,62 MAX 9.91 0,127 15.24 Schematic 18.16 MAX 19.56 MAX Schematic 15.24 0,381 18.2 MAX 5 power.pulseelectronics.com 16.51 P688.N (05/19) http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Mechanicals LCCI-50 - PA2753NL and PA2756NL 17.02 Schematic 11.3 16.76 9.91 16.51 19.56 MAX Makeni - PA2754NL, PA2755NL 7.62 19,05 MAX 2,03 16,89 17,02 21.1 Schematic 11,94 11,2 MAX 0,127 6 power.pulseelectronics.com P688.N (05/19) http://www.power.pulseelectronics.com/contact SMT Common Mode Chokes 1.0A to 20.0A Mechanical HCCI-80 - PA2757NL Schematic 3 1 4 2 1:1 2% HCCI-80 - PA2670NL and PG1265NL Schematic 3 1 4 2 1:1 2% For More Information Pulse Worldwide Headquarters 15255 Innovation Drive Ste 100 San Diego, CA 92128 U.S.A. Pulse Europe Pulse Electronics GmbH Am Rottland 12 58540 Meinerzhagen Germany Pulse China Headquarters Pulse Electronics (ShenZhen) CO., LTD D708, Shenzhen Academy of Aerospace Technology, The 10th Keji South Road, Nanshan District, Shenzhen, P.R. China 518057 Pulse North China Room 2704/2705 Super Ocean Finance Ctr. 2067 Yan An Road West Shanghai 200336 China Pulse South Asia 3 Fraser Street 0428 DUO Tower Singapore 189352 Pulse North Asia 1F, No.111 Xiyuan Road Zhongli District Taoyuan City 32057 Taiwan (R.O.C) Tel: 858 674 8100 Fax: 858 674 8262 Tel: 49 2354 777 100 Fax: 49 2354 777 168 Tel: 86 755 33966678 Fax: 86 755 33966700 Tel: 86 21 62787060 Fax: 86 2162786973 Tel: 65 6287 8998 Fax: 65 6280 0080 Tel: 886 3 4356768 Fax: 886 3 4356820 Performance warranty of products offered on this data sheet is limited to the parameters specified. Data is subject to change without notice. Other brand and product names mentioned herein may be trademarks or registered trademarks of their respective owners. (c) Copyright, 2019. Pulse Electronics, Inc. All rights reserved. 7 power.pulseelectronics.com P688.N (05/19) http://www.power.pulseelectronics.com/contact