11 fo 1 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
Preliminary
Data Sheet
PH5503A2NA1
Ambient Illuminance Sensor
DESCRIPTION
The PH5503A2NA1 is an ambient illuminance sensor with a photo diode and current amplifier. This product has
spectral characteristics close to human eye sensitivity and outputs light current proportional to the ambient brightness.
The PH5502B2NA1-E4 can be used to improve the performance and reduce the power consumption of digital
equipment such as FPD-TV sets and mobile phones, by enabling automatic brightness control and automatic switching
on and off of lighting systems.
FEATURES
• Small and thin SON package 2.55 x 1.56 x 0.55 mm
• Spectral characteristics close to human eye sensitivity
Peak sensitivity wavelength 555 nm TYP.
• Output characteristics proportional to illuminance
• Output light current 60 µA TYP.@100 lx (Fluorescent light)
• Reduced variation of output current among light sources
• Low voltage operation VCC = 1.8 to 5.5 V
• Pb-free
APPLICATIONS
• FPD TV sets, displays
• Mobile phones, smartphones
• Notebook PCs, tablet PCs
• DSCs, DVCs
• FA equipment
• Lighting systems, etc.
R08DS0055EJ0100
Rev.1.00
Dec 13, 2011
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 2 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
PACKAGE DIMENSIONS (UNIT: mm)
1
3
6
4
BOTTOM VIEW
TOP VIEW
SIDE VIEW
(0.25)
5.055.0
0.2
0.22
0.2
1.56±0.15
2.55±0.2
2.25
2 5
Remark Pin 1 is distinguishable by the shape of the lead frame.
Remark ( ) indicates nominal dimensions.
Pin No. Terminal
1 OUT
2 GND
3 VCC
4 NC
5 NC
6 NC
Remark 1. Connect all the NC terminals to GND or VCC.
2. The bypass capacitor between VCC and GND is to be mounted within 20 mm of the package body.
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 3 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
BLOCK DIAGRAM
OUT
Light
Source
GND
V
CC
MARKING EXAMPLE
(Bottom View)
1 pin
Assembly code
Product code
0 3
ORDERING INFORMATION
Part Number Order Number Packing Style
PH5503A2NA1 PH5503A2NA1-E4 Embossed Tape 3 000 pcs/reel
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 4 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
V egatloV ylppuS CC 6 V
I tnerruC thgiL O 5 mA
Power Dissipation *1 PD 135 mW
Operating Temperature Topt −30 to +85 °C
Storage Temperature Tstg −40 to +100 °C
Note: *1. Mounted on glass epoxy board (18 mm × 13 mm × t0.8 mm)
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol MIN. TYP. MAX. Unit
V egatloV ylppuS CC 1.8 3.0 5.5 V
ELECTRO-OPTICAL CHARACTERISTICS
(TA = 25°C, VCC = 3.0 V, unless otherwise specified)
Parameter Symbol Conditions MIN. TYP. MAX. Unit
Supply Current *1 ICC EV = 100 lx *2 − 68 − µA
Peak Sensitivity Wavelength λp − − 555 − nm
Light Current *1 IO0 EV = 0 lx − − 0.1 µA
I O1 EV = 100 lx *2 48 60 72 µA
Sensitivity Ratio of
Fluorescent/Incandescent
− EV = 100 lx − 1 − Multiple
Saturation Output Voltage *3 VO EV = 100 lx, RL = 150 kΩ *2 2.6 2.9 − V
Switching Rise Time tr RL = 5 kΩ *5 − 50 − µs
Time *4 Fall Time tf − 80 − µs
Delay Time td − 160 − µs
Storage Time ts − 4 − µs
Note: *1 Measured under load resistance conditions of an output current unsaturated
*2 Fluorescent light
*3 Saturation output voltage measurement method:
Light
Source
Illuminance (lx)
V
CC
PH5503A
GND
OUT
R
L
V
CC
V
CC
V
O
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 5 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
*4 Switching Time
Pulse input
Input
Output
V
CC
PH5503A
GND
OUT
R
L
V
CC
t
d
t
s
90%
10%
t
r
t
f
*5 White LED
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 6 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
TYPICAL CHARACTERISTICS (TA = 25°C, VCC = 3.0 V, unless otherwise specified)
1.1
1
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
25.115.00009008007006005004003
1 000 1 100 1 200
0
0.2
0.4
0.6
0.8
1
1.2
−90 −60 −30 0 30 60 90 0
0.2
0.4
0.6
0.8
1
1.2
−90 −60 −30 0 30 60 90
oitaR)mn( htgnelevaW
).ged( elgnA).ged( elgnA
RatioRatio
Ratio
1 pin
1 pin
White LED
Krypton light
Halogen light
Incandescent light
Fluorescent light
+ +- -
SPECTRAL SENSITIVITY
CHARACTERISTICS
DIRECTIONAL CHARACTERISTICS 1 DIRECTIONAL CHARACTERISTICS 2
LIGHT SOURCE SENSITIVITY
VARIATION
Remark The graphs indicate nominal characteristics.
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 7 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
0
0.2
0.4
0.6
0.8
1.2
1
1.4
−40 0
0.01
0.1
1
0.001
2
VCC (V)
Ratio
Ratio
−40 −20 0 20 40 60 80 100
−20 0 20 40 60 80 100
0.2
0.4
0.6
0.8
1
1.2
1.4
2.533.544.555.5 6
Illuminance (lx)
AT 100 lx (NORMALIZED AT V
CC
= 3 V)
V
CC
DEPENDENCY OF LIGHT CURRENT
CURRENT AT 100 lx (NORMALIZED AT 25°C)
TEMPERATURE DEPENDENCY OF LIGHT
OF LIGHT CURRENT AT 0 lx
TEMPERATURE DEPENDENCY
IO1 (
μ
A)
IO0 (
μ
A)
Temperature (°C)
Temperature (°C)
1 10 100 1 000 10 000
1
10
100
1 000
10 000
Load between OUT-GND
a: No load
c: 10 kΩ
b: 1 kΩ
LIGHT CURRENT VS. ILLUMINANCE
c
a
b
Remark The graphs indicate nominal characteristics.
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 8 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
RECOMMENDED OPTICAL LAYOUT (UNIT: mm)
0.06
1.275 1.275
Offset
0.780.78
1 pin
Recommended area for light to hit (1.5 to 2 mm radius)
Light detecting area (0.24 x 0.24 mm)
It is recommended to position the sensor so that light hits a circular
area (shown by the dotted line) with a radius of 1.5 to 2 mm (diameter
of 3 to 4 mm) from the center of the package.
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 9 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
TAPING SPECIFICATIONS (UNIT: mm)
Outline and Dimensions (Tape)
Tape Direction
Outline and Dimensions (Reel)
Symbol Dimensions (mm)
A
B
W
Symbol Dimensions (mm)
C
D
E
θ
θ
φ
φ
φ
13±0.2
2.0±0.5
21.0±0.8
180
+0
–1.5
60
+1
–0
9.0
+1
–0
1
2
θθ
E
W
D
C
B A
21
Perforation
Direction of feed
Product
Carrier tape
Cover tape
Product
Pin 1
φ
φ
2.0±0.1
50.0±2.01.0±0.4
0.78±0.05
3.5±0.05 1.75±0.1
8.0±0.2
0.78±0.05
2.9
1.95
4.0±0.1 1.05±0.05
1.5
+0.1
–0
90°
120°
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 01 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
RECOMMENDED MOUNT PAD DIMENSIONS (Unit: mm)
0.24
0.24
0.22
0.50.5
0.50.5
0.22
0.220.22
1.85 0.55
Remark All dimensions in this figure must be evaluated before use.
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
PH5503A2NA1 Chapter Title
11 fo 11 egaP 00.1.veR 0010JE5500SD80R
Dec 13, 2011
NOTES ON HANDLING
1. Recommended reflow soldering conditions
(including infrared reflow, convection reflow, and infrared + convection reflow)
(1) This product is dry-packed with desiccant in order to avoid moisture absorption.
(2) After breaking the seal, reflow soldering must be done within 168 hours under the recommended temperature
profile shown below.
(3) If more than 168 hours have passed after breaking the seal, the baking process must be done by using a tape and
reel.
Baking conditions: Once, with tape and reel, 60±5°C, 10 to 24 hours
After the baking process, this product must be stored under conditions of 30°C or below, 70% RH or below, and
reflow soldering must be done within 168 hours.
< Storage conditions after breaking seal >
• 03 : snoitidnoc egarotS °C or below, 70% RH or below
• Maximum storage period after breaking seal : 168 hours (Second reflow soldering must be completed
within 168 hours.)
< Reflow soldering conditions >
• 062 : erutarepmet wolfer kaeP °C or below (Package surface temperature)
• 2 : swolfer fo rebmun mumixaM
• No repair by hand soldering
• Maximum chlorine content of rosin flux (percentage mass) : 0.2% or less
Time
Recommended Temperature Profile of Reflow
Package Surface Temperature
60 to 120 s
220°C
255°C
8 min. MAX.
150°C
Ramp-up rate 3°C/s MAX. Ramp-down rate 6°C/s MAX.
Peak Temperature
260°C MAX.
30 s or less
60 s or less
200°C
A Business Partner of Renesas Electronics Corporation.
DISCONTINUED
All trademarks and registered trademarks are the property of their respective owners.
C - 1
Revision History PH5503A2NA1 Data Sheet
Description
Rev. Date
Page Summary
1.00 Dec 13, 2011 − First edition issued
DISCONTINUED
Notice
1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas
Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to
be disclosed by Renesas Electronics such as that disclosed through our website.
2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or
technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or
others.
3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part.
4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for
the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the
use of these circuits, software, or information.
5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and
regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to
the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is
prohibited under any applicable domestic or foreign laws or regulations.
6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics
assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein.
7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product
depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas
Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for
which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the
use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics.
The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc.
"Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools;
personal electronic equipment; and industrial robots.
"High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically
designed for life support.
"Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical
implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life.
8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage
range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the
use of Renesas Electronics products beyond such specified ranges.
9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and
malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the
possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to
redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult,
please evaluate the safety of the final products or system manufactured by you.
10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics
products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes
no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations.
11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics.
12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries.
(Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries.
(Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics.
DISCONTINUED
