Motor Time Switch H2F-D CSM_H2F-D_DS_E_2_1 ON/OFF Control 48 Times per Day in 15-min Increments The H2F-D is a Low-cost Time Switch for Affordable Operation in a Compact DIN 72 x 72-mm Body. Choose the Ideal Model to Match the Application. 72 mm * Just insert the trippers for easy setup. * Make exact time settings using the dial. * Three mounting methods. * Lineup includes models with power interruption backup. * Safety standards: UL and CSA (except for H2F-30/-31). 72 mm PS The H2F-DM, -DMC, -DMF, -DMFC, -30, and -31 use nickel metal hydride batteries. Dispose of the batteries at a battery recycling location. E Ordering Information Control cycle Drive method Power interruption backup Daily Synchronous No (24 hours) motor Quartz motor Yes (See note.) Power supply voltage Mounting method Control output Flush mounting SPST-NO Surface mounting/ track mounting SPDT SPST-NO SPDT 100/110/120 VAC Model H2F-D H2F-DC H2F-DF H2F-DFC 200/220/240 VAC H2F-D H2F-DC H2F-DF H2F-DFC 100 to 240 VAC H2F-DM H2F-DMC H2F-DMF H2F-DMFC 12 to 24 VDC H2F-30 --- --- H2F-31 Note: Always use the Time Switch with the Y92S-42 Battery mounted. Accessories (Order Separately) Name Model Trippers (1 set for ON and OFF) (See note 1.) Y92S-21 Battery (See note 2.) Y92S-42 Note: 1. Three gold-colored trippers for ON and three silver-colored trippers for OFF are enclosed with the H2F-D. Separately order trippers if more are required. 2. The battery is built into the H2F-D. When the battery is nearing the end of its service life, order the model number listed at the left. 1 H2F-D Specifications Time Specifications Type Daily Cycle Minimum scale graduation Minimum set time 24 h 15 min 15 min Maximum set time 23 h 45 min Ratings Power supply voltage Synchronous motor: 100/110/120 VAC, 50/60 Hz; 200/220/240 VAC, 50/60 Hz (See note 1.) Quartz motor: 100 to 240 VAC, 50/60 Hz; 12 to 24 VDC 85% to 110% of rated supply voltage Operating voltage range Power consumption (See note 2.) Control output Synchronous motor: 3 VA max. Quartz motor: 1 VA max. at 100 to 120 VAC, 4 VA max. at 200 to 240 VAC, 1 W max. at 12 to 24 VDC 15 A at 250 VAC, resistive load Ambient operating temperature -10 to 55C (with no icing) Ambient operating humidity 35% to 85% Note: 1. Use the switch on the back of the H2F-D to change the frequency. 2. Inrush current will briefly flow when the power supply is turned ON. For details, refer to Technical Guide for Timers and Time Switches. Characteristics Type Daily Item Synchronous motor Quartz motor Operating time deviation (See note 1.) Voltage influence and temperature influence 3 min max. Setting error (See note 2.) 3 min max. Cyclic error 3 min max. Power interruption backup time --- Insulation resistance 100 M min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 min (between current-carrying metal parts and non-current-carrying metal parts and between control output and operating circuit) 1,000 VAC, 50/60 Hz for 1 min (between non-continuous contacts) Vibration resistance 180 h min. (See note 3.) Destruction 16.7 Hz with 2-mm single amplitude for 1 hour each in three directions Malfunction 10 to 55 Hz with 0.25-mm single amplitude for 10 minutes each in three directions Shock resistance Destruction 1,000 m/s2 5 times each in 6 directions Malfunction 200 m/s2 once each in 6 directions Life expectancy Contacts: 10,000 operations min., Motor: 20,000 h Weight Flush-mounting model: Approx. 150 g, Surface-mounting model: Approx. 200 g Case color Light gray (Munsell 5Y7/1) Note: 1. Deviation in the ON time or OFF time. 2. Time difference between the set time and time required to start operation when the pointer is set to the present time. 3. Value when power has been supplied for at least 72 h at initial use. 2 H2F-D Mounting Method Flush Mounting Surface Mounting DIN Track Mounting Removing the H2F-D from the DIN Track Use a flat-blade screwdriver to pull down the yellow lever at the back of the bottom and remove the Time Switch. H2F-@@F 72 x 72 x 45 mm (H x W x D) (below faceplate: 29 mm) 95 x 72 x 50 mm (H x W x D) Panel Cutout Dimensions (according to DIN 43700) Mounting Screw Dimensions Location of yellow lever 17.5 27.5 600.2 Two, M3 68 +0.7 0 Screw size: M3 x 45 (enclosed) Adapter 610.2 68 +0.7 0 Panel thickness: 1 to 3.2 mm Note: The mounting adapter and mounting screws are enclosed. 3 H2F-D Connections Synchronous Motor Models: SPST-NO Output Synchronous Motor Models: SPDT Output H2F-D H2F-DC H2F-DF H2F-DFC Note: 100-V-class models differ from 200-V-class models. They cannot be used together. Quartz Motor Models: SPST-NO Output Quartz Motor Models: SPDT Output H2F-DM, H2F-30 H2F-DMC H2F-DMF Note: On the H2F-30 (12 to 24 VDC), terminal number 2 is positive and terminal number 3 is negative. H2F-DMFC, H2F-31 Note: On the H2F-31 (12 to 24 VDC), terminal number 2 is positive and terminal number 3 is negative. Note: 1. Use a separate power supply for the load. 2. Screw tightening torque: Maximum torque: 0.98 N*m 3. Use the same type of lead wires when connecting lead wires to the terminal block. If different wire types are used, it will not be possible to tighten the thin lead wires, and the wires may become disconnected during use. 4. Recommended wire: AWG 18 to 24 (cross-sectional area: 0.205 to 0.823 mm2), solid wire or twisted wire. 5. Do not connect more than two crimp terminals to the same terminal. Nomenclature Time Setting Mounting Holes ON/OFF operation selector knob POWER Dial rotation direction (clockwise) Power indicator (red) (See note.) Dial Tripper Gold: ON time setting Silver: OFF time setting Manual switch Mounting Holes Time setting knob Insert the trippers into the scale graduation at the desired times. * Insert gold trippers for times the load is to be turned ON and silver trippers for times the load is to be turned OFF. Note: 1. Be sure to insert the trippers all the way. 2. Set the trippers in alternating positions only after thoroughly checking the ON and OFF positions. Holes for spare trippers Note: Only quartz motor models have a power indicator. 4 H2F-D Dimensions Note: All units are in millimeters unless otherwise indicated. H2F-D (C) H2F-DM (C) H2F-30 72 16 17 1.3 72 65.5 45 Note: The terminal screws are M3.5. 65.5 H2F-DF (C) H2F-DMF (C) H2F-31 50 9 72 6 72 95 6 29 Note: The terminal screws are M3.5. 2 2 5 H2F-D Safety Precautions Refer to Safety Precautions for All Timers. 3. If the lead wire has been installed in front of the panel, place the Time Switch on part A of the adapter and push it in toward B. Then secure the Time Switch by tightening the screws as described in step 2. !WARNING Minor injury may occasionally occur due to the battery bursting, igniting, or leaking. Never short-circuit the positive and negative terminals, disassemble the battery, deform it under pressure, or dispose of it in fire. !CAUTION Minor injury by electric shock may occasionally occur. Do not touch any of the terminals while power is being supplied. Be sure to mount the terminal cover after wiring. Adapter B Time Switch Lead wire A Setting the Time Unexpected operation may occasionally occur. Before changing times or other settings while power is being supplied, either turn OFF the power on the load side or set the output ON/OFF switch to OFF and confirm the safety of the system. * Turn the center knob clockwise to set the time. Product failure may occur if the knob is turned counterclockwise or the knob is turned while the triggers are being pressed. * Set the hour to the arrow at the upper left and set minutes to the arrow on the center knob. * The gold-colored triggers are for ON and the silver-colored triggers are for OFF. Securely push in the triggers with the wider part facing the outer part of the dial. * Insert the spare triggers into the holes at the lower right for storage. Fire may occasionally occur. Tighten the terminal screws to the rated torque. Minor electric shock, fire, or product failure may occasionally occur. Do not allow metal fragments, copper wire scraps, or shavings from installation work to fall inside the Time Switch. Minor electric shock, fire or product failure may occasionally occur. Never attempt to disassemble, modify, or repair the product or touch any of the internal parts. Manual Switch Minor injury due to explosion may occasionally occur. Do not use the product where it is subject to flammable or explosive gas. Models with SPST-NO Output The output will turn OFF regardless of trigger settings when the manual switch at the lower left of the front panel is set to OFF. The output will turn ON regardless of trigger settings when the manual switch is set to ON. The output will turn ON and OFF according to the trigger settings when the manual switch is set to AUTO. Precautions for Correct Use Mounting Models with SPDT Output Panel Flush Mounting 1. As illustrated at the right, bend the enclosed adapter in the direction of A, and then push part B in the direction of the arrow (i.e., toward the back of the panel cut). Panel A Panel Adapter B * Load 1 (terminals 4 and 5) and load 2 (terminals 5 and 6) will both turn OFF when the manual switch at the lower left of the front panel is set to OFF. * The output will turn ON and OFF according to the trigger settings when the manual switch is set to AUTO. Load 1 (terminals 4 and 5) will turn ON and load 2 (terminals 5 and 6) will turn OFF when the manual switch is set to ON. A 2. Once the adapter has been mounted, insert the Time Switch as illustrated at the right. Secure the Time Switch in two places using the enclosed screws (M3 x 16) tightened with a torque of 0.58 N*m max. * Check the output indicator when returning operation to AUTO. If the knob has been touched or the output indicator has changed because of vibration or shock, turn the knob, switch the output, and then return operation to AUTO. Output Indicator and ON/OFF Switch Knob * The output indicator at the upper left of the front panel shows the output status when the manual switch is set to AUTO. The output can also be manually switch ON or OFF by turning the knob clockwise (i.e., in the direction of the arrow). (This is possible only when the manual switch is set to AUTO.) * Do not turn the ON/OFF switch knob when the manual switch is set to ON or OFF. Do not turn the Knob counterclockwise. 6 H2F-D H2F-D/-DF Series: Synchronous Motor Models Before mounting the Time Switch, set the frequency switch to the frequency for the region where the Time Switch will be used. (East Japan: 50 Hz, West Japan: 60 Hz) H2F-DM Series and H2F-30/-31: Quartz Motor Models * Remove the battery cover on the back of the Time Switch. Be sure to insert the battery before supplying power. Operating the Time Switch without the battery mounted will increase the time error. Always mount the battery. Press from the top. Battery cover Slide out. * Pay careful attention to the polarity when inserting the battery. Insert the battery following the polarity marked in the battery box of the Time Switch. Before using the Time Switch, be sure to close the battery cover after the battery is inserted. * The enclosed battery is fully charged. In the rare event that battery performance decreases due to natural discharging, the 180-hour power interruption backup function will back up operation if power has been continuously supplied for 72 hours after installing the battery in the Time Switch. If the battery is completely discharged, the Time Switch may not operate when the battery is installed. If the Time Switch does not operate, supply power for at least 3 min, and then set the time. * Turning the power supply ON and OFF will extremely shorten the service life of the battery. Use the Time Switch with the power supplied continuously. * The service life of the battery is approximately three years (at room temperature). If the battery has been used for three years or more, replace it as soon as possible. Using the battery close to the end of its service life will increase the time error. * The battery may leak or cause corrosion due to excessive discharge if the H2F is left unused for an extended period with the battery mounted. Be sure to remove the battery before storing the H2F. * Turn OFF the power supply before replacing the battery. * Use only the specified battery (Y92S-42). The battery may leak or burst if any other battery is used, possibly resulting in equipment damage or injury. Other Precautions * Always use a thermo-switch on the load circuit when a heater is used. * Operate the Time Switch within the specified rating ranges for vibration and shock. * The H2F is not waterproof or oil resistant. Do not use the H2F in locations subject to water splashing or oil contact. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 7 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: H2F-D AC100/110/120 H2F-DC-AC200/220/240 H2F-DFC-AC100/110/120 H2F-WM AC100-240 H2F-WMC AC100240 H2F-WMF AC100-240