Updated September 23, 2014. ©2014 ADLINK Technology, Inc. All Rights Reserved. All specications are subject to change without further notice.
High-Performance DAQ
Ordering Information / Quick Selection Guide
Specifications
Features
■ Supports a 32-Bit 3.3 V or 5 V PCI bus (DAQ-2000 series)
■ x1 lane PCI Express® Interface (DAQe-2000 series)
■ PXI specification Rev. 2.2 compliant (PXI-2000 series)
■ 4-CH differential analog inputs
■ Bipolar or unipolar analog input ranges
■ Programmable gains of x1, x2, x4, x8
■ Scatter-gather DMA for both analog inputs and outputs
■ 2-CH 12-Bit multiplying analog outputs with waveform
generation
■ 24-CH TTL digital input/output
■ 2-CH 16-Bit general-purpose timer/counter
■ Analog and digital triggering
■ Fully auto calibration
■ Multiple cards synchronization through SSI (System
Synchronization Interface) bus or PXI trigger bus
■Supported Operating System
•Windows 7/8 x64/x86, Linux
■Driver and SDK
•LabVIEW, MATLAB, C/C++, Visual Basic,
Visual Studio.NET
■Software Utility
•AD-Logger
4-CH 14/16-Bit Up to 2 MS/s Simultaneous-Sampling DAQ Cards
PXI/DAQ/DAQe-2000 Series
Terminal Boards & Cables
■DIN-68S-01
■ACL-10568-1
■ACL-SSI-2/3/4
* For more information on mating terminal board and cables, please
refer to P3-48/49.
Model Name Analog Input Analog Output DIO Timer/Counter
No. of
channels Resolution Sampling
rate Input range No. of
channels Resolution Update rate No. of channels No. of channels
PXI/DAQ/DAQe-2010 4-CH DI 14 Bit 2 MS/s ±1.25 V to ±10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit
PXI/DAQ/DAQe-2005 4-CH DI 16 Bit 500 kS/s ±1.25 V to ±10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit
PXI/DAQ/DAQe-2006 4-CH DI 16 Bit 250 kS/s ±1.25 V to ±10 V 2 12 Bit 1 MS/s 24-CH 8255 PIO 2-CH, 16-Bit
DAQe-2010
DAQ-2010
PXI-2010
Model Name
PCI-9221 PCI-9222 PCI-9223
Resolution 16 Bit
Number of channels 16 SE/ 8 DIFF 16 SE/ 8 DIFF 32 SE/ 16 DIFF
Maximum sampling rate
(single channel)
250 kS/s 250 kS/s 500 kS/s
Programmable gain 1, 5,10, 25 1, 2, 4, 5, 8, 10, 20, 40 1, 2, 4, 5, 8, 10, 20, 40
Input range ±5 V, ±1 V, ±500 mV, ±200 mV ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V,
±1 V, ±500 mV, ±250 mV
±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V,
±1 V, ±500 mV, ±250 mV
Offset error ±0.7 mV typical, after calibration
Gain error ±0.015% of FSR, after calibration
FIFO buffer size
1 k samples
Trigger sources
Software, external digital Software, external digital, SSI
Trigger mode
Post trigger Post trigger, retrigger, gate trigger
Input coupling
DC
Overvoltage protection
±10 V Continuous ±30 V
Input impedance
High impedance > 1 GΩ
Data Transfer
Polling, scatter-gather DMA
Number of channels
2 voltage outputs
Resolution
16-Bit
Maximum update rate
1.25 kS/s (static) 1 MHz (simultaneous update)
FIFO
- 512
Output range
±5 V ±10 V
Output driving capacity
±5 mA
Slew rate
0.014 V/μs 20 V/μs
Setting time (0.1% of full scale)
1396 μs 2.6 μs
Offset error
±1 mV
Gain error
±0.02% FSR ±0.01% FSR
Rising time
390 μs 0.67 μs
Falling time
395 μs 0.705 μs
Mode
Digital I/O(1) , General Timer/
Counter(1),Pulse Generation(1)
Digital I/O, General Timer/Counter,Pulse Generation
Digital I/O
8 DI/4 DO (5 V TTL level) 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level)
General Timer/Counter
Two 32-Bit, Base clock: 40 MHz,
external to 10 MHz
Four 32-Bit, Base clock: 80 MHz, external to 10 MHz
Pulse generation
Two PWM outputs (Modulation
frequency: 0.005 Hz to 5 MHz;
Duty cycle: 1%-99%)
Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz;
Duty cycle: 1%-99%)
Number of channels
2(2)
Encoder type
CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder
PCI Bus
5 V and 3.3 V universal PCI bus
Auto-calibration
Yes
I/O Connector
One 37-pin D-Sub connector Two 68-pin SCSI-VHDCI female
Operation temperature
0˚C to 45˚C (32˚F to 113˚F) 0˚C to 55˚C (32˚F to 131˚F)
Storage temperature
-20˚C to 80˚C (-4˚F to 176˚F) -20˚C to 70˚C (-4˚F to 158˚F)
Humidity
5 to 95% non-condensing
Power requirements
+5 V 1A typical,+12 V 100mA
typical,-12 V 100mA typical
+5 V 1.2 A typical, +12 V 760 mA typical, -12 V 50 mA typical
Dimensions
120 mm x 87 mm (4.68" x 3.39") 175 mm x 107 mm (6.82" x 4.17")(not including connectors)
Model Name
PXI/DAQ/DAQe-2010 PXI/DAQ/DAQe-2005 PXI/DAQ/DAQe-2006
Resolution 14 Bit 16 Bit, no missing codes 16 Bit, no missing codes
Number of channels 4 simultaneous-sampling channels with differential input
Maximum sampling rate 2 MS/s 500 kS/s 250 kS/s
Programmable gain 1, 2, 4, 8
Bipolar input ranges ±10 V, ±5 V, ±2.5 V, ±1.25 V
Unipolar input ranges 0-10 V, 0-5 V, 0-2.5 V, 0-1.25 V
Offset error ±3 mV 2 mV ±1 mV
Gain error ±0.1% of FSR ±0.04% of FSR ±0.03% of FSR
Input Coupling DC
Overvoltage protection Power on: Continuous ±35 V, Power off: Continuous ±15 V
Input Impedance 1 GΩ/100 pF
Trigger sources Software, external digital/analog trigger, SSI bus
Trigger modes Pre-trigger, post-trigger, middle-trigger, delay-trigger, and repeated trigger
FIFO buffer size 8 k samples 512 samples 512 samples
Data transfers Polling, scatter-gather DMA
Number of channels 2 voltage outputs
Resolution 12 Bit
Output ranges 0-10 V, ±10 V, 0-AOEXTREF, ±AOEXTREF
Maximum update rate 1 μs
Slew rate 20 V/μs
Settling time 3 μs to ±0.5 LSB accuracy
Offset error ±3mV ±1mV ±1mV
Gain error ±0.05% of max. output ±0.04% of max. output ±0.04% of max. output
Driving capacity 5 mA
Stabililty Any passive load, up to 1500 pF
Trigger sources Software, external digital/analog trigger, SSI bus
Trigger modes Post-trigger, delay-trigger, and repeated trigger
FIFO buffer size 2 k samples
Data transfers Programmed I/O, scatter-gather DMA
Number of channels 8255 24-Bit programmable input/output
Compatibility 5 V/TTL
Data transfers Programmed I/O
Number of channels 2
Resolution 16 Bit
Compatibility 5 V/TTL
Base clock available 40 MHz , external clock up to 10 MHz
Auto Calibration
Yes (+5 V, ±2 ppm/˚C)
Dimensions 160 mm x 100 mm (not including connectors) (PXI-2000 series)
175 mm x 107 mm (not including connectors) (DAQ-2000 series)
168 mm x 107 mm (not including connectors) (DAQe-2000 series)
Connector 68-pin VHDCI-type female
Operating temperature 0˚C to 55˚C (32˚F to 131˚F )
Storage temperature -20˚C to 70˚C (-4˚F to 158˚F)
Humidity 5 to 95%, non-condensing
Power requirements +5 V 1.82 A typical (PXI/DAQ-2010)
+3.3 V 1.246 A, +12 V 0.448 A
typical (DAQe-2010)
+5 V 2.04 A typical (PXI/DAQ-2005)
+3.3 V 1.03 A, +12 V 0.75 A
typical (DAQe-2005)
+5 V 1.82 A typical (DAQ-2006)
+3.3 V 1.02 A, +12 V 0.67 A
typical (DAQe-2006)
Analog Input
Analog Output
Digital I/O
Timer/Counter
General Specifications
3-20
www.adlinktech.com
