SmartMotion Platform (R) by InvenSense(R) DK-101xx: DK-10100, DK-10101, DK-10111, DK-10110 Development Kit for ICP-101xx High Accuracy, Low Power, Barometic Pressure and Temperature Sensor Overview Key Features The DK-101xx is a comprehensive development platform for ICP10101, ICP-10101, ICP-10111, and ICP-10110, a High Accuracy, Low Power, Waterproof* Barometric Pressure and Temperature Sensor IC. * ICP-101xx Pressure and Temperature Sensor The platform designed around Microchip G55 MCU can be used by developers for rapid evaluation and development of ICP-101xx based solutions. The DK-101xx includes an on-board Embedded Debugger so external tools are not required to program or debug the G55 MCU. * USB connectors for host interface to * Microchip G55 MCU with 512KB Flash * On-board embedded debugger for programming and debugging * Support software debug and sensor data logging * Board power supply through USB Part Number Development Kit ICP-10100 DK-10100 ICP-10101 DK-10101 ICP-10110 DK-10110 ICP-101111 DK-10111 The development kit comes with necessary software including InvenSense MotionLink, a GUI based development tool and embedded Motion Drivers for ICP-101xx. Embedded Motion Drivers (eMD) consists of a set of APIs to configure various aspects of the platform including ICP-101xx sensor parameters such as Raw Data, and Calibrated Data (Temp in C, Pressure in Pa). MotionLink is a GUI based development tool included with the platform. It can be used to capture and visualize the sensor data from the motion sensor. * DK-10100 and DK-10110 only invensense.com/smartmotion-platform