Accessories
Y92@
Mounting Brackets
Special resin mounting sleeves: Four different models available.
Simply select the size that fits the outside diameter of the Sensor.
Mounting Sleeves (Quick Mounting)
Once the Mounting Sleeve and Sensor have been set properly, readjustment is not required when replacing the Sensor.
Material: Polyacetal
A
B
F
C
E9.8 dia.
D
Mounting Bracket Dimensions
Note: Consider the influence of surrounding metal when mounting non-shielded Sensors. (Refer to
information on individual Sensors for dimensions.)
Item Dimension (mm) Applied
hexagonal
bolts
Applicable
Sensor
diameter
Model A B C D E F
Y92E-B8 18±0.2 10 max. 18 8 dia. 28 max. 6 M4 × 20 M8
Y92E-B12 24±0.2 12.5 max. 20 12 dia. 37 max. 6 M4 × 25 M12
Y92E-B18 32±0.2 17 max. 30 18 dia. 47 max. 7 M5 × 32 M18
Y92E-B30 45±0.2 17 max. 50 30 dia. 60 max. 10 M5 × 50 M30
E
D
C
B
A
F
Two Mounting Sleeve
clamping nuts
E (between opposing
faces
)
E (between
opposing
faces)
Distance across
Sensor lock nut: E
Mounting Sleeve Dimensions
Note: Do not tighten the nut with excessive force. Do not exceed the torque in the following table.
Item Dimension (mm)
Applicable
Sensors
Model
A B C D
E (between
opposing
faces)
F
Y92E-G8 Approx. 28 18.5 15.5 M12 × 1174
E2E/E2E2
M8 Shielded
Sensors
Y92E-G12 Approx. 29 20.5 17.5 M18 × 1244
E2E/E2E2
M12 Shielded
Sensors
Y92E-G18 Approx. 35 23.5 20.5 M24 × 1.5 30 5
E2E/E2E2
M18 Shielded
Sensors
Y92E-G30 Approx. 39 27.5 24.5 M36 × 1.5 41 5
E2E/E2E2
M30 Shielded
Sensors
Item Mounting Sleeve clamping nuts Sensor lock nut
Model
Y92E-G8 18 N·m 6 N·m
Y92E-G12 40 N·m 15 N·m
Y92E-G18 70 N·m 15 N·m
Y92E-G30 100 N·m 30 N·m
http://www.ia.omron.com/ 1
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
Y92@
Protective Covers
Covers are available to protect the Sensing Head.
Simply select the size that fits the outside diameter of the Sensor.
Sputter Protective Covers (Threaded on Inside of Cover)
The cover uses Fluororesin, so that chips that adhere due to sputtering can be easily removed.
Sputter Protective Covers (Not Threaded on Inside of Cover)
Chips that adhere due to sputtering can be easily removed.
B
C
A
Protective Cover Dimensions
Item Dimension (mm) Cover inner
diameter
(threaded)
Material Applicable Sensor
diameter
Model A B C
Y92E-E12 14 dia. 5 0.5 M12 1
Polyacetal
resin
M12
Shielded Models
Y92E-E18 21 dia. 6 10.2 M18 1 M18
Shielded Models
Y92E-E30 33 dia. 8 1.50.2 M30 1.5 M30
Shielded Models
Y92E-E12M 14 dia. 12 0.5 M12 1 M12
Unshielded Models
Y92E-E18M 21 dia. 16 10.2 M18 1 M18
Unshielded Models
Y92E-E30M 33 dia. 21 1.50.2 M30 1.5 M30
Unshielded Models
+0.2
0.1
+0.2
0.1
A
D
C
B
Sputter Protective Cover Dimensions
Note: Do not screw on too tightly, or the cap may be damaged.
Item Dimension (mm) Applicable Sensor
diameter
Model A B C D
Y92E-E8-7 10 dia. M8 1 0.5 5 M8 Shielded Models
Y92E-E12-7 14 dia. M12 1 0.5 5 M12 Shielded Models
Y92E-E18-7 21 dia. M18 110.2 6 M18 Shielded Models
Y92E-E30-7 33 dia. M30 1.5 1.50.2 8 M30 Shielded Models
+0.2
0.1
+0.2
0.1
DC
C0.5C0.5
C0.5
AB
1-dia. through
hole
Sputter Protective Cover Dimensions
Item Dimension (mm) Material Applicable Sensor
diameter
Model A B C D
Y92E-E12-2 11.0 dia. 14.0 dia. 5.0 1.0
Silicon
rubber
M12
Shielded Models
Y92E-E18-2 17.0 dia. 21 dia. 7.0 3.0 M18
Shielded Models
Y92E-E30-2 28.5 dia. 33.0 dia. 8.0 6.0 M30
Shielded Models
http://www.ia.omron.com/ 2
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
2007.12
OMRON Corporation
Industrial Automation Company
http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2007 All Rights Reserved.
In the interest of product improvement, specifications are subject to change without notice.
Read and Understand This Catalog
Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or
comments.
Warranty and Limitations of Liability
WARRANTY
OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if
specifi ed) from date of sale by OMRON.
OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR
FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE
HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED.
LIMITATIONS OF LIABILITY
OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, OR COMMERCIAL
LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR
STRICT LIABILITY.
In no event shall responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted.
IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS
OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT
SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR.
Application Considerations
SUITABILITY FOR USE
OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's
application or use of the product.
At the customer's request, OMRON will provide applicable third party certifi cation documents identifying ratings and limitations of use that apply to the
products. This information by itself is not suffi cient for a complete determination of the suitability of the products in combination with the end product,
machine, system, or other application or use.
The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible
uses of the products, nor is it intended to imply that the uses listed may be suitable for the products:
• Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog.
• Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government regulations.
• Systems, machines, and equipment that could present a risk to life or property.
Please know and observe all prohibitions of use applicable to the products.
NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE
SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND
INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
Disclaimers
CHANGE IN SPECIFICATIONS
Product specifi cations and accessories may be changed at any time based on improvements and other reasons.
It is our practice to change model numbers when published ratings or features are changed, or when signifi cant construction changes are made.
However, some specifi cations of the product may be changed without any notice. When in doubt, special model numbers may be assigned to fi x
or establish key specifi cations for your application on your request. Please consult with your OMRON representative at any time to confi rm act ua l
specifi cations of purchased product.
DIMENSIONS AND WEIGHTS
Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown.
ERRORS AND OMISSIONS
The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical,
typographical, or proofreading errors, or omissions.
PERFORMANCE DATA
Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent
the result of OMRON’s test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON
Warranty and Limitations of Liability.
PROGRAMMABLE PRODUCTS
OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof.
COPYRIGHT AND COPY PERMISSION
This catalog shall not be copied for sales or promotions without permission.
This catalog is protected by copyright and is intended solely for use in conjunction with the product. Please notify us before copying or reproducing this
catalog in any manner, for any other purpose. If copying or transmitting this catalog to another, please copy or transmit it in its entirety.
