SIL10 Series | 10A DC/DC Non-Isolated DC/DC Converters SIL10 SERIES Single output Current rating of 10A Outputs of between 0.8V and 3.3V, fixed and flexible versions Works from either a 5V or 3.3V system bus voltage High efficiency - up to 96% achievable on 3.3Vout POL converter that saves board space - vertical or horizontal versions Industry standard footprint Ultra wide output voltage version also available The SIL10 series are non-isolated DC/DC distributed power, workstations, optical converters packaged in a single-in-line network and wireless applications. footprint giving designers a cost effective Implemented using state of the art surface solution for conversion from either a 5V or mount technology and automated 3.3V input to output voltages of 3.3V to manufacturing techniques, the SIL10 0.8V. The SIL10 offers both fixed outputs offers compact size and efficiencies of up and wide a output trim range, which to 96%. allows maximum design flexibility and a pathway for future upgrades. Local voltage conversion by the SIL10 series from existing 5V or 3.3V system voltages eliminates the need for redesign of existing power architectures when voltage requirements change. The SIL10 is designed for applications that include [ 2 YEAR WARRANTY ] TUV 1 File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC Converters Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Symbol Min Input voltage - continuous Vin (cont) Input voltage - peak/surge Typ Max Units Notes and Conditions -0.3 5.5 V DC Vin(+) - Vin(-) Vsurge -0.3 6 V DC 2s max, non-repetitive Operating temperature Top -40 100 C Measured at thermal reference points, See Note 1 for thermal de-rating Storage temperature Tstorage -40 125 C Output power (0V8S) Pout (max) 0 8.8 W Output power (1V0S) Pout (max) 0 11.0 W Output power (1V2S) Pout (max) 0 13.2 W Output power (1V5S) Pout (max) 0 16.5 W Output power (1V8S) Pout (max) 0 19.8 W Output power (2V0S) Pout (max) 0 22.0 W Output power (2V5S) Pout (max) 0 27.5 W Output power (3V3S) Pout (max) 0 36.3 W Output power (3V3W) Pout (max) 0 36.3 W All specifications are typical at nominal input Vin = 5V, full load under any resistive load combination at 25C unless otherwise stated. Input Characteristics Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - operating 3 5 5.5 V DC Note 2 Input current - no load Input current - Quiescent Vin (oper) lin lin (off) 70 2 150 mA DC mA DC Vin (min) - Vin (max), enabled Converter disabled Inrush current (i2t) linrush A2s Complies with ETS300 132 Part 4.7, with recommended LISN Measured with no external filter Slowblow/antisurge HRC recommended 12 Input ripple current Input fuse* * 65 12.5 mA rms A Fuse A - S(T) 1.25 x 0.25 inches SIBA P/N 70-065-65/12.5ARS Turn On/Off Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - turn on Vin (on) 2.25 2.70 3 V DC Turn on delay - enabled, then power applied Tdelay (power) 20 msec Turn on delay - power applied, then enabled Tdelay (enable) 20 msec Will regulate @ Vin >3V if Vout 2V5 With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band Rise time Trise 15 msec 2 From 10% to 90%; full resistive load, no external capacitance File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters Signal Electrical Interface Characteristic - Signal Name Symbol Min At remote/control ON/OFF pin Open collector or equivalent compatible Control pin open circuit voltage Vih High level input current Iih High level input voltage Vih Acceptable high level leakage current Iih (leakage) Low level input voltage ViI Low level input current IiI Typ Max 0 300 Notes and Conditions V See Notes 2 and 3 See Application Note 134 for Remote ON/OFF details Iih = 0 A; open circuit voltage A Current flowing into control pin when pin is pulled high Vin Converter guaranteed OFF when control pin is greater than Vih (min) -10 A Acceptable leakage current from control pin into the open collector driver (neg = from converter) 0.5 V Converter guaranteed ON when control pin is less than Vil (max) 20 A Vil = < 0.4 V Max Units Notes and Conditions 1.2 0 Units Reliability and Service Life Characteristic Symbol Min Mean time between failure MTBF 680,000 Hours MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25C; ground benign environment Mean time between failure MTBF 7,042,000 Hours Telecordia 332 Mean time between failure MTBF TBA Hours Demonstrated. This entry will be periodically updated as the number of test hours increase 3 www.artesyn.com Typ File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters Other Specifications Characteristic Symbol Switching frequency Fsw Min Weight Typ Max Units Notes and Conditions 300 kHz Fixed frequency 5 g EMC Electromagnetic Compatibility Phenomenon Port Standard Test level Criteria Notes and conditions Enclosure EN61000-4-2 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Immunity: ESD Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage. RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test. LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test. Unit will self recover to normal performance after test. Referenced ETSI standards: ETS 300 386-1 table 5 (1997): Public telecommunication network equipment, EMC requirements ETS 300 132-2 (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions 4 File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters Safety Agency Approvals Characteristic UL TUV E174104 B02 12 38572 035 Material Ratings Characteristic - Signal Name Notes and Conditions Flammability rating UL94V-0 Model Numbers Model Number Input Voltage SIL10-05S0V8-V SIL10-05S0V8-H SIL10-05S1V0-V SIL10-05S1V0-H SIL10-05S1V2-V SIL10-05S1V2-H SIL10-05S1V5-V SIL10-05S1V5-H SIL10-05S1V8-V SIL10-05S1V8-H SIL10-05S2V0-V SIL10-05S2V0-H SIL10-05S2V5-V SIL10-05S2V5-H SIL10-05S3V3-V SIL10-05S3V3-H SIL10-05W3V3-V SIL10-05W3V3-H 5 www.artesyn.com 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 3.0 4.5 4.5 4.5 4.5 - 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC 5.5VDC Output Voltage Output Current (Max.) Typical Efficiency Max. Load Regulation 0.8V 0.8V 1.0V 1.0V 1.2V 1.2V 1.5V 1.5V 1.8V 1.8V 2.0V 2.0V 2.5V 2.5V 3.3V 3.3V 3.3V 3.3V 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 10A 83% 83% 86% 86% 88% 88% 90% 90% 92% 92% 93% 93% 94% 94% 95% 95% 95% 95% 1.5% 1.5% 1.5% 1.5% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 0V8S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 1.9 3.5 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 0.778 0.8 0.822 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 0.76 0.834 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1.5 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 0V8S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 6 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 0V8S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 0V8S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 0V8S Model Efficiency Characteristic Symbol Min Typ Efficiency h 82 83 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 83 84 % Iout = 50% Iout (max), Vin = Vin (nom) 7 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V0S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 2.3 4 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 0.97 1.0 1.03 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 0.953 1.047 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1.5 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 1V0S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 8 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V0S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 1V0S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 1V0S Model Efficiency Characteristic Symbol Min Typ Efficiency h 85 86 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 86 87 % Iout = 50% Iout (max), Vin = Vin (nom) 9 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V2S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 2.7 4 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.17 1.2 1.34 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.143 1.256 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 1V2S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 10 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V2S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 1V2S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 1V2S Model Efficiency Characteristic Symbol Min Typ Efficiency h 87 88 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 88 89 % Iout = 50% Iout (max), Vin = Vin (nom) 11 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V5S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 3.3 5 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.46 1.5 1.54 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.43 1.57 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 1V5S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 12 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V5S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 1V5S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 1V5S Model Efficiency Characteristic Symbol Min Typ Efficiency h 89 90 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 90 91 % Iout = 50% Iout (max), Vin = Vin (nom) 13 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V8S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 3.9 5 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.75 1.8 1.85 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.71 1.89 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 1V8S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 14 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V8S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100 mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 1V8S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 1V8S Model Efficiency Characteristic Symbol Min Typ Efficiency h 91 92 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 92 93 % Iout = 50% Iout (max), Vin = Vin (nom) 15 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V0S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 4.3 5 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 1.946 2.0 2.054 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 1.906 2.094 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 2V0S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 16 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V0S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100 mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 2V0S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 2V0S Model Efficiency Characteristic Symbol Min Typ Efficiency h 92 93 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 93 94 % Iout = 50% Iout (max), Vin = Vin (nom) 17 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V5S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 5.3 6 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance external bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 2.43 2.5 2.57 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 2.38 2.612 V DC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 2V5S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth: mV rms 20 MHz. See Application Note 134 for measurement set-up details 18 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V5S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100 mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 2V5S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 2V5S Model Efficiency Characteristic Symbol Min Typ Efficiency h 93 94 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 93 95 % Iout = 50% Iout (max), Vin = Vin (nom) 19 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3S Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 7 8 ADC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 65 230 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter Input capacitance internal filter Cinput 18.8 F Internal to converter Input capacitance External bypass Cbypass 100 F Recommended customer added capacitance Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom.) 3.21 3.3 3.39 VDC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo 3.15 3.45 VDC For all line, static load and temperature until end of life Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 ADC 3V3S Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth 20 MHz mV rms See Application Note 134 for set-up details 20 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3S Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100 mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % % Trim up (% of Vo nom) Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If Trim up is invoked de-rate accordingly Max Units Notes and Conditions 3V3S Model Protection and Control Features Characteristic Allowable output voltage trim range Typ 10 Open sense voltage 3V3S Model Efficiency Characteristic h Efficiency h Efficiency 21 Symbol www.artesyn.com Min Typ 94 95 % Iout = 100% Iout (max), Vin = Vin (nom) 94 96 % Iout = 50% Iout (max), Vin = Vin (nom) File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3W Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 7 8 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) Input capacitance - internal filter Cinput 65 230 18.8 Input capacitance - external bypass Cbypass 100 Characteristic Symbol Min Typ Nominal set-point voltage Vo (nom) 3.21 3.3 Total regulation band Vo 3.15 mA rms Iout = Iout (max.), measured mA pk-pk with no external filter F F Recommended customer added capacitance Max Units Notes and Conditions 3.39 V DC Vin = Vin (nom); Iout = Iout (nom) 3.45 V DC For all line, static load and temperature until end of life. Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 10 A DC 3V3W Model Electrical Characteristics - O/P Output current continuous Iout Output current - short circuit Isc 20 A rms Output voltage - noise Vp-p Vrms 50 25 mV pk-pk Measurement bandwidth 20 MHz mV rms See Application Note 134 for measurement set-up details 22 0 Continuous, unit auto recovers from short, Vo < 100mV File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3W Model Electrical Characteristics - O/P Characteristic Symbol Min Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext 0 Symbol Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100mA/sec 50 sec Settling time to within 1% of output set point voltage for 50% to 75% step load 10,000 F Max Units Notes and Conditions 10 % Trim up (% of Vo nom) % Trim down (% of Vo nom) See Application Note 134 for details of trim equations and trim curves 10 % If trim up is invoked de-rate accordingly Max Units Notes and Conditions 3V3W Model Protection and Control Features Characteristic Typ Output voltage trim range 75 Open sense voltage 3V3W Model Efficiency Characteristic Symbol Min Typ Efficiency h 94 95 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency h 94 96 % Iout = 50% Iout (max), Vin = Vin (nom) 23 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 0V8S Model EFFICIENCY (%) 90 82 74 Vin = 3V Vin = 5V Vin = 5V5 66 58 50 0 2 4 6 8 10 OUTPUT CURRENT (A) 24 Figure 1: Efficiency vs Load Figure 2: Short Circuit Characteristic Figure 3: Typical Transient Response (50% - 75% Step Load Change) Figure 4: Typical Transient Response (75% - 50% Step Load Change) Figure 5: Typical Power-up Characteristic Figure 6: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 0V8S Model Figure 7: Typical Ripple and Noise 25 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V0S Model EFFICIENCY (%) 92 87 82 Vin = 3V Vin = 5V Vin = 5V5 77 72 67 62 0 2 4 6 8 10 OUTPUT CURRENT (A) 26 Figure 8: Efficiency vs Load Figure 9: Short Circuit Characteristic Figure 10: Typical Transient Response (50% - 75% Step Load Change) Figure 11: Typical Transient Response ( 75% - 50% Step Load Change) Figure 12: Typical Power-up Characteristic Figure 13: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V0S Model Figure 14: Typical Ripple and Noise 27 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V2S Model EFFICIENCY (%) 92 87 82 Vin = 3V Vin = 5V Vin = 5V5 77 72 67 62 0 2 4 6 8 10 OUTPUT CURRENT (A) 28 Figure 15: Efficiency vs Load Figure 16: Short Circuit Characteristic Figure 17: Typical Transient Response (50% - 75% Step Load Change) Figure 18: Typical Transient Response (75% - 50% Step Load Change) Figure 19: Typical Power-up Characteristic Figure 20: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V2S Model Figure 21: Typical Ripple and Noise 29 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V5S Model EFFICIENCY (%) 96 90 Vin = 3V Vin = 5V Vin = 5.5V 84 78 72 0 2 4 6 8 10 OUTPUT CURRENT (A) 30 Figure 22: Efficiency vs Load Figure 23: Short Circuit Characteristic Figure 24: Typical Transient Response (50% - 75% Step Load Change) Figure 25: Typical Transient Response (75% - 50% Step Load Change) Figure 26: Typical Power-up Characteristic Figure 27: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V5S Model Figure 28: Typical Ripple and Noise 31 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V8S Model EFFICIENCY (%) 96 90 Vin = 3V Vin = 5V Vin = 5V5 84 78 72 0 2 4 6 8 10 OUTPUT CURRENT (A) 32 Figure 29: Efficiency vs Load Figure 30: Short Circuit Characteristic Figure 31: Typical Transient Response (50% - 75% Step Load Change) Figure 32: Typical Transient Response (75% - 50% Step Load Change) Figure 33: Typical Power-up Characteristic Figure 34: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 1V8S Model Figure 35: Typical Ripple and Noise 33 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V0S Model EFFICIENCY (%) 96 90 Vin = 3V Vin = 5V Vin = 5V5 84 78 72 0 2 4 6 8 10 OUTPUT CURRENT (A) 34 Figure 36: Efficiency vs Load Figure 37: Short Circuit Characteristic Figure 38: Typical Transient Response (50% - 75% Step Load Change) Figure 39: Typical Transient Response (75% - 50% Step Load Change) Figure 40: Typical Power-up Characteristic Figure 41: Control On/Off Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V0S Model Figure 42: Typical Ripple and Noise 35 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 10 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 70 75 80 85 90 95 OUTPUT CURRENT (A) OUTPUT CURRENT (A) 2V5S Model 10 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 65 100 70 75 80 85 90 95 100 AMBIENT TEMPERATURE (C) AMBIENT TEMPERATURE (C) Figure 43: De-rating Curve with Vin = 3.3V and No Trim Figure 44: De-rating Curve with Vin = 5V and No Trim EFFICIENCY (%) 95 91 Vin = 3V Vin = 5V Vin = 5.5V 87 83 79 0 2 4 6 8 10 OUTPUT CURRENT (A) 36 Figure 45: Efficiency vs Load Figure 46: Short Circuit Characteristic Figure 47: Typical Transient Response (50% - 75% Step Load Change) Figure 48: Typical Transient Response (75% - 50% Step Load Change) File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 2V5S Model Figure 49: Typical Power-up Characteristic Figure 50: Control On/Off Characteristic Figure 51: Typical Ripple and Noise 37 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 97 10 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 94 Vin = 4V5 Vin = 5V Vin = 5V5 91 88 85 0 70 75 80 85 90 95 100 AMBIENT TEMPERATURE (C) 38 EFFICIENCY (%) OUTPUT CURRENT (A) 3V3S Model 0 2 4 6 8 10 OUTPUT CURRENT (A) Figure 52: De-rating Curve with Vin = 5V and No Trim Figure 53: Efficiency vs Load Figure 54: Short Circuit Characteristic Figure 55: Typical Transient Response (50% - 75% Step Load Change) Figure 56: Typical Transient Response (75% - 50% Step Load Change) Figure 57: Typical Power-up Characteristic File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3S Model Figure 58: Control On/Off Characteristic 39 www.artesyn.com Figure 59: Typical Ripple and Noise File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 10 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 70 75 80 85 90 95 100 OUTPUT CURRENT (A) OUTPUT CURRENT (A) 3V3W Model 10 8 6 0 m/s (0 LFM) 0.5 m/s (100 LFM) 1 m/s (200 LFM) 1.5 m/s (300 LFM) 4 2 0 70 AMBIENT TEMPERATURE (C) 75 80 85 90 95 100 AMBIENT TEMPERATURE (C) Figure 60: De-rating Curve with Vin = 5V and Vout = 3.3V Figure 61: De-rating Curve with Vin = 5V and Vout = 0.8V EFFICIENCY (%) 97 94 Vin = 4V5 Vin = 5V Vin = 5V5 91 88 85 0 2 4 6 8 10 OUTPUT CURRENT (A) 40 Figure 62: Efficiency vs Load Figure 63: Short Circuit Characteristic Figure 64: Typical Transient Response (50% - 75% Step Load Change) Figure 65: Typical Transient Response (75% - 50% Step Load Change) File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters 3V3W Model Figure 66: Typical Power-up Characteristic Figure 67: Control On/Off Characteristic Figure 68: Typical Ripple and Noise 41 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SXA10 Series | 15W DC/DC SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters PIN VIEW 2.000 0.020 (50.80 0.50) SIDE VIEW 0.500 (12.70) PCB 6 5 3 2 5 1 4 3 J2 0.316 0.008 (8.03 0.20) 2 1 J1 0.100 (2.54) 0.170 (4.32) 1.900 (48.26) 0.050 (1.27) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.15 3 Place 0.006 Figure 69: Mechanical Drawing - Horizontal SIDE VIEW FRONT VIEW 0.307 0.008 (7.80 0.20) 2.000 0.020 (50.80 0.50) 0.500 (12.70) PCB 0.135 (3.43) 0.635 (16.13) 1 2 3 4 5 1 J1 0.168 (4.26) 2 3 J2 5 6 0.100 (2.54) 0.050 (1.27) 1.900 (48.26) Dimensions in Inches (mm) Tolerances (unless otherwise specified) 2 Place 0.15 3 Place 0.006 Figure 70: Mechanical Drawing - Vertical 42 File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters Note 1 Thermal Reference Point is defined as the highest temperature measured at any one of the specified thermal reference points. See Figure 71: Thermal reference points. Case Temperature should not exceed 115C Note 2 Is referenced to Ground Note 3 SIL10 The SIL10 is supplied as standard with active low logic. Control input pulled low: Unit On Control input left open: Unit On Note 4 Thermal reference set up: Unit mounted on an edge card test board 215mm x 115mm. Test board mounted vertically. For test details and recommended set-up see Application Note 134 . Figure 71: Thermal Reference Points CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. Pin Connections Pin No. Function J1-1 J1-2 J1-3 J1-4 J1-5 J2-1 J2-2 J2-3 J2-4 J2-5 J2-6 +Vout +Vout Remote Sense (+) +Vout Ground Ground +Vin +Vin No Pin Trim Remote ON/OFF Figure 72: Pinout 43 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003 SIL10 Series | 10A DC/DC Non-Isolated DC/DC converters NORTH AMERICA e-mail: sales.us@artesyn.com 800 769 7274 + 508 628 5600 EUROPEAN LOCATIONS e-mail: sales.europe@artesyn.com IRELAND + 353 24 93130 AUSTRIA + 43 1 80150 FAR EAST LOCATIONS e-mail: sales.asia@artesyn.com HONG KONG + 852 2699 2868 Long Form Data Sheet Artesyn Technologies(R) 2003 The information and specifications contained in this data sheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 44 www.artesyn.com File Name:LF_SIL10_extra.PDF Rev: 10 Feb 2003