MCC TM Micro Commercial Components omponents 20736 Marilla Street Chatsworth !"# $ % " !"# PB62F Features * * * * * * * * Low Forward Voltage Any Mounting Position Silver Plated Copper Leads Surge Overload Rating Of 150 Amps Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Halogen free available upon request by adding suffix "-HF" Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates Compliant. See ordering information) 6 Amp Fast Recovery Bridge Rectifier 200 Volts PB-6 Maximum Ratings * * Operating Temperature: -55C to +125C Storage Temperature: -55C to +150C Microsemi Catalog Number Device Marking PB62F PB62F Maximum Recurrent Peak Reverse Voltage 200V B Maximum RMS Voltage 140V Maximum DC Blocking Voltage 200V C E D Electrical Characteristics @ 25C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Forward Voltage Drop Per Element Maximum DC Reverse Current At Rated DC Blocking Voltage Maximum Reverse Recovery Time PB62F IF(AV) 6.0A TJ = 50C IFSM 150A 8.3ms, half sine + AC A AC VF 1.30V IFM = 3.0A; TJ = 25C* IR 10A 1 mA TJ = 25C TJ = 100C - A DIMENSIONS Trr 200ns IF=0.5A, IR=1.0A, Irr=0.25A *Pulse test: Pulse width 300 sec, Duty cycle 1% Revision: A G DIM A B C D E G INCHES MIN .578 .230 .750 .405 .038 .145 www.mccsemi.com 1 of 4 MAX .618 .270 --.444 .042 --- MM MIN 14.69 5.84 19.10 10.30 0.97 3.70 MAX 15.71 6.86 --11.30 1.07 --- NOTE 2PL 2PL 4PL/TYP 2013/01/01 MCC PB62F TM Figure 1 Typical Forward Characteristics Micro Commercial Components Figure 2 Typical Reverse Characteristics 100 10 60 6 40 4 20 2 1 10 .6 6 .4 4 .2 2 TJ=25C 25C Amps Amps .1 1 .06 .6 .04 .4 .02 .2 .01 .1 .006 .06 .00 4 .04 .002 .02 .01 .001 20 .2 .4 .6 .8 1.0 1.1 40 60 80 100 120 140 1.2 Volts Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Instantaneous Reverse Leakage Current I - MicroAmperesversus Percent Of Rated Peak Reverse Voltage - Volts Figure 3 Forward Derating Curve 12 10 8 6 Amps 4 2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 20 40 60 80 100 120 C Average Forward Rectified Current - Amperesversus Ambient Temperature - C Revision: A www.mccsemi.com 2 of 4 2013/01/01 MCC PB62F Micro Commercial Components Figure 4 Peak Forward Surge Current 300 250 200 150 Amps 100 50 0 1 2 4 6 8 10 20 40 00 60 80 100 Cycles Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Figure 5 Reverse Recovery Time Characteristic And Test Circuit Diagram 50 10 trr +0.5A 0 Pulse Generator Note 2 25Vdc 1 Oscilloscope Note 1 -1.0 1cm Set Time Base for 20/100ns/cm Notes: 1. Rise Time = 7ns max. Input impedance = 1 megohm, 22pF 2. Rise Time = 10ns max. Source impedance = 50 ohms 3. Resistors are non-inductive Revision: A -0.25 www.mccsemi.com 3 of 4 2013/01/01 TM MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-BP Bulk: 1.6Kpcs/Ctn Note : Adding "-HF" suffix for halogen free, eg. Part Number-BP-HF ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 4 of 4 2013/01/01