Silicon Junction FETs (Small Signal)
1
Publication date: May 2008 SJF00002CED
This product complies with the RoHS Directive (EU 2002/95/EC).
2SJ0164 (2SJ164)
Silicon P-channel junction FET
For switching circuits
Complementary to 2SK1104
■Features
•Low ON resistance
•Low-noise characteristics
■Absolute Maximum Ratings Ta = 25°C
Parameter Symbol Rating Unit
Gate-drain surrender voltage VGDS 65 V
Drain current ID−20 mA
Gate current IG−10 mA
Power dissipation PD300 mW
Channel temperature Tch 150 °C
Storage temperature Tstg −55 to +150 °C
Parameter Symbol Conditions Min Typ Max Unit
Gate-drain surrender voltage VGDS IG = 10 µA, VDS = 065 V
Drain-source current *IDSS VDS = −10 V, VGS = 0 − 0.6 −6.0 mA
Gate-source cutoff current IGSS VGS = 30 V, VDS = 010nA
Gate-source cutoff voltage VGSC VDS = −10 V, ID = −10 µA 1.5 3.5 V
Mutual conductance gmVDS = −10 V, ID = −1 mA, f = 1 kHz 1.8 2.5 mS
Short-circuit forward transfer capacitance Ciss VDS = −10 V, VGS = 0, f = 1 MHz 10 pF
(Common source)
Reverse transfer capacitance Crss 3pF
(Common source)
Drain-source ON resistance RDS(on) VDS = −10 mV, VGS = 0 300 Ω
■Electrical Characteristics Ta = 25°C ± 3°C
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors.
2. Observe precautions for handling. Electrostatic sensitive devices.
3. *: Rank classification
Rank P Q R
IDSS (mA) − 0.6 to −1.5 −1.0 to −3.0 −2.5 to −6.0
Note) The part number in the parenthesis shows conventional part number.
■Package
•Code
NS-A1
•Pin Name
1: Source
2: Gate
3: Drain
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SJ0164
2SJF00002CED
This product complies with the RoHS Directive (EU 2002/95/EC).
Yfs VGS Yfs IDCiss , Coss , Crss VDS
PD TaID VDS ID VGS
0 16040 12080
0
200
150
50
100
Power dissipation PD (mW)
Ambient temperature Ta (°C)
0−12−10−8−2−6−4
0
−4.0
−3.0
−1.0
−2.0
T
a
= 25°C
V
GS
= 0 V
0.2 V
0.4 V
0.6 V
0.8 V
Drain-source voltage VDS (V)
Drain current ID (mA)
054132
0
3.0
2.5
2.0
1.5
1.0
0.5
Gate-source voltage VGS (V)
Drain current ID (mA)
VDS = 10 V
Ta = 25°C
−2.0 0−1.5 − 0.5−1.0
0
4.0
3.0
1.0
2.0
Forward transfer admittance Yfs (mS)
Gate-source voltage VGS (V)
VDS = 10 V
f = 1 kHz
Ta = 25°C
0−12−10−8−2−6−4
0
16
12
4
8
V
DS
= −10 V
f = 1 kHz
T
a
= 25°C
Forward transfer admittance Y
fs
(mS)
Drain current I
D
(mA)
1 10 100
0
24
20
16
12
8
4
f = 1 MHz
VGS = 0
Ta = 25°C
Ciss
Coss
Crss
Drain-source voltage VDS (V)
Short-circuit forward transfer capacitance (Common-source) Ciss ,
Short-circuit output capacitance (Common-source) Coss ,
Reverse transfer capacitance (Common-source) Crss (pF)
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
2SJ0164
3
SJF00002CED
This product complies with the RoHS Directive (EU 2002/95/EC).
NS-A1
Unit: mm
4.0 ±0.2
3.0 ±0.2
15.6 ±0.5
0.75 max.
0.45
(0.8)
(0.8)
(1.27) (1.27)
123
0.7 ±0.1
0.45
2.54 ±0.15
2.0 ±0.2
+0.20
−0.10
+0.20
−0.10
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
Request for your special attention and precautions in using the technical information and
semiconductors described in this book
(1)If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and
regulations of the exporting country, especially, those with regard to security export control, must be observed.
(2)The technical information described in this book is intended only to show the main characteristics and application circuit examples
of the products, and no license is granted under any intellectual property right or other right owned by our company or any other
company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other
company which may arise as a result of the use of technical information described in this book.
(3)The products described in this book are intended to be used for standard applications or general electronic equipment (such as office
equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
– Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support
systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod-
ucts may directly jeopardize life or harm the human body.
– Any applications other than the standard applications intended.
(4)The products and product specifications described in this book are subject to change without notice for modification and/or im-
provement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product
Standards in advance to make sure that the latest specifications satisfy your requirements.
(5)When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions
(operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute
maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any
defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure
mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire
or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products.
(6)Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS,
thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which
damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages.
(7)This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita
Electric Industrial Co., Ltd.
Maintenance/
Discontinued
Maintenance/Discontinued includes following four Product lifecycle stage.
planed maintenance type
maintenance type
planed discontinued typed
discontinued type
Please visit following URL about latest information.
http://www.semicon.panasonic.co.jp/en/
