DO Series
• Min i- SIP SSR
• Ra ting s to 1 A @ 6 0 V DC
• Bi -polar tr ansi s t or out put
• DC c o nt ro l
• No r mal l
y
o
p
en or nor m all
y
closed out
p
u
t
PRODUCT SELECTION
Control Voltage 1 A
3-9 VDC DO061A (4), DO061A-B
1.7-9 VDC DO061B (4), DO061B -B
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description DO0
Operating Voltage Range (47-63Hz) [VDC] 3-60
Maximum Off-State Leakage Current @ Rated Voltage [µA] 200
Maximum Load Current [Adc] 1.0
Minimum Load Current [Adc] 0.02
Maximum Surge Current [Adc] 5 (1sec)
Maximum On-State Voltage Drop @ Rated Current 1.5
Minimum Power Factor (with Maximum Load) 0.5
INPUT SPECIFICATIONS (1)
Description DO061A DO061B
Control Voltage Range 3-9 VDC 1.7-9 VDC
Must Turn On Voltage 3.0 VDC 1.7 VDC
Must Turn Off Voltage 1.0 VDC 0.8 VDC
Typycal Input Current @ 5 VDC 15 mAdc 15 mAdc
Nominal Input Impedance 270 Ohm 270 Ohm
Maximum Turn-On Time [µsec] 50 50
Maximum Turn-Off Time [µsec] 50 150
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)( 3) 4000 Vrms
Minimum Insulation Resistance (@ 500 VDC)(3) 109 Ohm
Maximum Capacitance, Input/Output 8 pF
Ambient Operating Temperature Range -30 to 80 °C
Ambient Storage Temperature Range -30 to 125 °C
Weight (typical) 0.15 oz. (4.3g)
Encapsulation Thermally Conductive Epoxy
GE NERAL NOTES
1) Al l par am eter s at 25°C unless other wise spec ified.
2 ) Ty pi cal On -S tat e Re sista nce =.1 3
3) D ielectr i c and i nsul ation resi stance are m easur ed betw een input and output
4) Induct i ve l o ads shoul d be di ode suppr essed
MECHANICAL SPECIFICATIONS
DC CONTROL
PIN 1: +DC LOAD
PIN 2: -D C LOAD
PIN 3: +DC CONTROL
PIN 4: -DC CONTROL
THERMAL DERATE INFORMATION
AGENCY APPROVALS
Rev. 010411
ANNEX - ENVIROMENTAL INFORMATION