GP2S700HCP GP2S700HCP Long Focal Distance, Subminiature Photointerrupter Features Outline Dimensions 1. Ultra compact SMD package 2. Long focal distance type (focal distance:3mm) 3. Effective detection distance:1.2 to 5.5mm Detecter center 4 4 1 (1.5) 2 4 (0.8) 3 Emitter center 4 Anode Emitter Collector Cathode (0.25) (1) (1) Note 3) (0.93) (0.25) 0.4 2 (2.7) (0.93) Input Output *1 For 5s 3 3 Optical center 3 Absolute Maximum Ratings (Ta=25C) Parameter Symbol Rating Unit mA Forward current IF 50 V Reverse voltage VR 6 mW Power dissipation PD 75 V Collector-emitter voltage VCEO 35 Emitter-collector voltage V VECO 6 Collector current mA IC 20 Collector power dissipation mW PC 75 Total power dissipation mW Ptot 100 -25 to +85 Operating temperature C Topr Storage temperature C Tstg -40 to +100 *1 Soldering temperature Tsol 260 C 1 1 (2.3) 1. Copiers 2. Facsimiles 3. Printers 2 (0.8) 2 Applications (Unit : mm) Note) 1) Unspecified tolerance:0.3mm 2) ( ):Reference dimensions 3) There are cases that the oblique line portions may not be filled with epoxy resin. Recommended circuit pattern 4.5 3.5 1.1 1.2 Pattern wiring is not allowed on oblique line portion not to cause short-circuit. Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. Internet Internet address for Electronic Components Group http://sharp-world.com/ecg/ GP2S700HCP Electro-optical Characteristics Input Output Transfer characteristics Parameter Forward voltage Reverse current Collector dark current Collector current *2 Leak current Rise time *3 Response time Fall time (Ta=25C) Conditions IF=20mA VR=6V VCE=20V VCE=2V, IF=4mA VCE=2V, IF=4mA VCE=2V, IC=100A RL=1 000, d=4mm Symbol VF IR ICEO IC ILEAK tr tf MIN. - - - 60 - - - TYP. 1.2 - 1 - - 20 20 MAX. 1.4 10 100 410 700 100 100 Unit V A nA A nA s s 2 No reflective object 3 "d" is glass thickness of reflective mirror Fig.1 Measuring Configulation of Collector Current Fig.2 Test Circuit for Response Time Reflective object Aluminum evaporation glass VCC Input RL Glass plate d=Thickness:4.0mm Test terminal 10% Output 90% tr Fig.4 Power Dissipation vs. Ambient Temperature 60 120 50 100 Power dissipation P (mW) Forward current IF (mA) Fig.3 Forward Current vs. Ambient Temperature 40 30 20 10 0 -25 tf Ptot P, Pc 80 75 60 40 20 0 25 50 75 85 Ambient temperature Ta (C) 100 0 -25 0 25 50 75 85 Ambient temperature Ta (C) 100 GP2S700HCP Fig.5 Relative Collector Current vs. Distance (Reference) 100 Relative collector current (%) Aluminum evaporation glass 80 d IF=4mA VCE=2V Ta=25C 60 40 20 0 2 4 6 Distance d (mm) 8 10 NOTICE The circuit application examples in this publication are provided to explain representative applications of SHARP devices and are not intended to guarantee any circuit design or license any intellectual property rights. SHARP takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of SHARP's devices. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. SHARP reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. Manufacturing locations are also subject to change without notice. Observe the following points when using any devices in this publication. SHARP takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) The devices in this publication are designed for use in general electronic equipment designs such as: - - - Personal computers - -- Office automation equipment - -- Telecommunication equipment [terminal] - - - Test and measurement equipment - - - Industrial control - -- Audio visual equipment - -- Consumer electronics (ii) Measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when SHARP devices are used for or in connection with equipment that requires higher reliability such as: - -- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - - - Traffic signals - - - Gas leakage sensor breakers - - - Alarm equipment - -- Various safety devices, etc. (iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - - - Space applications - -- Telecommunication equipment [trunk lines] - -- Nuclear power control equipment - -- Medical and other life support equipment (e.g., scuba). If the SHARP devices listed in this publication fall within the scope of strategic products described in the Foreign Exchange and Foreign Trade Law of Japan, it is necessary to obtain approval to export such SHARP devices. This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of SHARP. Express written permission is also required before any use of this publication may be made by a third party. Contact and consult with a SHARP representative if there are any questions about the contents of this publication.