RoHS Compliant 2.5 V GaAs SPDT Switch 0.5 - 3.0 GHz MASWSS0167 V2 Features * * * * * * * * Functional Schematic Low Voltage Operation: 2.5 V Low Insertion Loss: 0.3 dB at 1 GHz Isolation: 34 dB @ 2.4 GHz 0.5 micron GaAs PHEMT Process Lead-Free 1.2 x 1.5 mm 6-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound RoHS Compliant* and 260C Reflow Compatible Description M/A-COM's MASWSS0167 is a GaAs PHEMT MMIC single pole double throw (SPDT) switch in a lead-free 1.2 x 1.5 mm 6-lead PQFN package. The MASWSS0167 is ideally suited for applications where low control voltage, low insertion loss, moderate isolation, small size and low cost are required. Pin Configuration Pin No. Pin Name Description 1 RF1 RF In/Out 2 GND RF Ground 3 RF2 RF In/Out 4 V2 Control 2 5 RFC RF Common 6 V1 Control 1 Typical applications are for filter and antenna switching in wireless LAN systems that connect separate receive functions to a common antenna, as well as other handset and general purpose switching applications. The MASWSS0167 is fabricated using a 0.5 micron gate length GaAs PHEMT process. The process features full passivation for performance and reliability. Absolute Maximum Ratings 2,3 Ordering Information1 Parameter Absolute Maximum Input Power (0.5 - 3 GHz, 2.5 V Control) +32 dBm Operating Voltage +8.5 volts Part Number Package Operating Temperature -40C to +85C MASWSS0167TR-3000 3000 piece reel Storage Temperature -65C to +150C MASWSS0167SMB Sample Test Board 1. Reference Application Note M513 for reel size information. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant 2.5 V GaAs SPDT Switch 0.5 - 3.0 GHz MASWSS0167 V2 Electrical Specifications: TA = 25C, VC = 0 V / +2.5 V, Z0 = 50 4 Parameter Test Conditions Units Min. Typ. Max. Insertion Loss 5 1 GHz 2 GHz 3 GHz dB dB dB -- -- -- 0.30 0.40 0.50 0.50 -- -- Isolation 1 GHz 2 GHz 3 GHz dB dB dB 23 -- -- 25 27 24 -- -- -- VSWR 0.5 - 3.0 GHz Ratio -- 1.1 -- IP3 Two Tone, +10 dBm/tone, 5 MHz Spacing, > 50 MHz dBm -- 48 -- P1dB -- dBm -- 28 -- Linear Pout 2.5 GHz, OFDM, QAM-64,54Mbps, EVM=2.5% 2.5 V 3.0 V 5.0 V dBm dBm dBm -- -- -- 21.0 23.5 28.5 -- -- -- Trise, Tfall 10% to 90% RF, 90% to 10% RF nS -- 30 -- Ton, Toff 50% control to 90% RF, and 50% control to 10% RF nS -- 35 -- Transients In Band mV -- 60 -- Control Current |VC| = 2.5 V A -- 1 5 4. For positive voltage control, external DC blocking capacitors are required on all RF ports. 5. Insertion Loss can be optimized by varying the DC blocking capacitor value, e.g. 1000 pF for 100 MHz - 500 MHz, 39 pF for 0.5 GHz - 3 GHz. Truth Table 6 Handling Procedures V1 V2 RFC - RF1 RFC - RF2 0 1 On Off 1 0 Off On 6. 0 = 0 0.2 V, 1 = 2.5 to 5 V Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant 2.5 V GaAs SPDT Switch 0.5 - 3.0 GHz MASWSS0167 V2 Typical Performance Curves Isolation Insertion Loss 0.8 40 +25C -40C +85C 0.6 30 0.4 20 0.2 10 0.0 0.5 1.0 1.5 2.0 2.5 0 0.5 3.0 +25C -40C +85C 1.0 Frequency (GHz) 2.0 2.5 3.0 EVM vs. Pout @ 2.5 GHz Return Loss 10 0 10 1.5 Frequency (GHz) 8 +25C -40C +85C EVM @ 2.5 V EVM @ 3.0 V EVM @ 5.0 V 6 20 4 30 40 0.5 2 0 1.0 1.5 2.0 2.5 10 3.0 15 20 25 30 35 Pout (dBm) Frequency (GHz) Lead-Free 1.2 x 1.5 mm 6-Lead PQFN 3 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information.