Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-104 –
08
0D±0.5
F±0.5
Sleeve
14 min.
3 min.
L=
= L16 : L±1.5
L20 : L±2.0
Pressure relief
06.3+
–
010
0D±0.5
fd±0.05
■Features
●Endurance : 105 °C 1000 h to 2000 h
●Minaturize, Higher Capacitance :
1 Size Miniturized Product of Current A-NHG
●RoHS directive compliant
Radial Lead Type
Series: HD Type: A
■Speci cations
Category Temp. Range –55 °C to +105 °C
Rated W.V. Range 10 V.DC to 50 V.DC
Nominal Cap. Range 2.2 μF to 22000 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent I < 0.01 CV or 3 (μA) After 2 minutes
(Which is greater)
tan dPlease see the attached standard products list
Endurance
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specifi ed below.
Duration : 05 to 08=1000 hours, 010 to 018=2000 hours
Capacitance change ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
■Di men sions in mm (not to scale)
■Frequency correction factor for ripple current
Body Dia. 0D 5 6.3 8 10 12.5 16 18
Lead Dia. 0d 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space F 2.0 2.5 3.5 5.0 5.0 7.5 7.5
W.V.(V.DC) Cap. (μF) Frequency (Hz)
60 120 1 k 10 k 100 k
10 to 50
2.2 to 33 0.75 1.00 1.55 1.80 2.00
47 to 470 0.80 1.00 1.35 1.50 1.50
1000 to 22000 0.85 1.00 1.10 1.15 1.15
(Unit : mm)
02 May. 2014
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-105 –
■Standard Prod ucts
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours)
(mm) (mm) (mm) (mm) (pcs) (pcs)
10
330 6.3 11.2 200 0.24 1000 0.5 2.5 5.0 2.5 EEUHD1A331( ) 200 2000
470 8 11.5 250 0.24 1000 0.6 3.5 5.0 EEUHD1A471( ) 200 1000
1000 10 12.5 460 0.24 2000 0.6 5.0 5.0 EEUHD1A102( ) 200 500
2200 10 16 760 0.26 2000 0.6 5.0 5.0 EEUHD1A222( ) 200 500
4700 12.5 20 1260 0.30 2000 0.6 5.0 5.0 EEUHD1A472( ) 200 500
6800 12.5 25 1570 0.34 2000 0.6 5.0 5.0 EEUHD1A682( ) 200 500
10000 16 25 1890 0.42 2000 0.8 7.5 7.5 EEUHD1A103( ) 100 250
15000 16 31.5 2180 0.52 2000 0.8 7.5 EEUHD1A153 100
22000 18 35.5 2400 0.66 2000 0.8 7.5 EEUHD1A223 50
16
10 0 5 11 110 0. 2 0 10 0 0 0. 5 5.0 2.5 EEUHD1C101( ) 200 2000
220 6.3 11.2 180 0.20 1000 0.5 2.5 5.0 2.5 EEUHD1C221( ) 200 2000
330 8 11.5 260 0.20 1000 0.6 3.5 5.0 EEUHD1C331( ) 200 1000
470 8 11.5 310 0.20 1000 0.6 3.5 5.0 EEUHD1C471( ) 200 1000
3300 12.5 20 1170 0.24 2000 0.6 5.0 5.0 EEUHD1C332( ) 200 500
4700 12.5 25 1480 0.26 2000 0.6 5.0 5.0 EEUHD1C472( ) 200 500
6800 16 25 1780 0.30 2000 0.8 7.5 7.5 EEUHD1C682( ) 100 250
8200 16 25 1780 0.34 2000 0.8 7.5 7.5 EEUHD1C822( ) 100 250
10000 16 31.5 2060 0.38 2000 0.8 7.5 EEUHD1C103 100
15000 18 35.5 2210 0.48 2000 0.8 7.5 EEUHD1C153 50
25
47 5 11 91 0.16 1000 0.5 5.0 2.5 EEUHD1E470( ) 200 2000
68 5 11 91 0.16 1000 0.5 5.0 2.5 EEUHD1E680( ) 200 2000
100 6.3 11.2 130 0.16 1000 0.5 2.5 5.0 2.5 EEUHD1E101( ) 200 2000
220 8 11.5 230 0.16 1000 0.6 3.5 5.0 EEUHD1E221( ) 200 1000
330 8 11.5 310 0.16 1000 0.6 3.5 5.0 EEUHD1E331( ) 200 1000
470 10 12.5 380 0.16 2000 0.6 5.0 5.0 EEUHD1E471( ) 200 500
1000 10 16 680 0.16 2000 0.6 5.0 5.0 EEUHD1E102( ) 200 500
2200 12.5 20 1090 0.18 2000 0.6 5.0 5.0 EEUHD1E222( ) 200 500
3300 12.5 25 1400 0.20 2000 0.6 5.0 5.0 EEUHD1E332( ) 200 500
4700 16 25 1750 0.22 2000 0.8 7.5 7.5 EEUHD1E472( ) 100 250
5600 16 25 1750 0.24 2000 0.8 7.5 7.5 EEUHD1E562( ) 100 250
6800 16 31.5 2040 0.26 2000 0.8 7.5 EEUHD1E682 100
10000 18 35.5 2200 0.34 2000 0.8 7.5 EEUHD1E103 50
35
47 5 11 90 0.14 1000 0.5 5.0 2.5 EEUHD1V470( ) 200 2000
100 6.3 11.2 150 0.14 1000 0.5 2.5 5.0 2.5 EEUHD1V101( ) 200 2000
220 8 11.5 270 0.14 1000 0.6 3.5 5.0 EEUHD1V221( ) 200 1000
330 10 12.5 350 0.14 2000 0.6 5.0 5.0 EEUHD1V331( ) 200 500
470 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V471( ) 200 500
680 10 16 460 0.14 2000 0.6 5.0 5.0 EEUHD1V681( ) 200 500
2200 12.5 25 1260 0.16 2000 0.6 5.0 5.0 EEUHD1V222( ) 200 500
3300 16 25 1610 0.18 2000 0.8 7.5 7.5 EEUHD1V332( ) 100 250
4700 16 31.5 1910 0.20 2000 0.8 7.5 EEUHD1V472 100
6800 18 35.5 2050 0.24 2000 0.8 7.5 EEUHD1V682 50
Endurance : 105 °C
05 to 08=1000 h, 010 to 018=2000 h
02 May. 2014
2.0
2.0
2.0
2.0
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ HD
– EEE-106 –
■Standard Prod ucts
· When requesting taped product, please put the letter "B" or "H" between the "( )". Lead wire pitch ✽B=5 mm, 7.5 mm, H=2.5 mm.
· Please refer to the page of “Taping Dimensions”.
✽✽✽ Please kindly accept last shipment : 31/Mar/2015
W.V. Cap.
(±20 %)
Case size Specifi cation Lead Length
Part No.
Min. Packaging Q'ty
Dia. Length
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
Endur-
ance
Lead
Dia.
Lead Space
Straight
Leads
Taping
Straight
Taping
✽B
Taping
✽H
(V) (μF) (mm) (mm)
(mA r.m.s.)
(hours)
(mm) (mm) (mm) (mm) (pcs) (pcs)
50
0.1 5 11 1.1 0.12 1000 0.5 5.0 2.5
EEUHD1HR10( )✽✽✽
200 2000
0.22 5 11 2.3 0.12 1000 0.5 5.0 2.5
EEUHD1HR22( )✽✽✽
200 2000
0.33 5 11 3.5 0.12 1000 0.5 5.0 2.5
EEUHD1HR33( )✽✽✽
200 2000
0.47 5 11 5 0.12 1000 0.5 5.0 2.5
EEUHD1HR47( )✽✽✽
200 2000
1 5 11 10 0.12 1000 0.5 5.0 2.5
EEUHD1H1R0( )✽✽✽
200 2000
2.2 5 11 18 0.12 1000 0.5 5.0 2.5
EEUHD1H2R2( )
200 2000
3.3 5 11 22 0.12 1000 0.5 5.0 2.5
EEUHD1H3R3( )
200 2000
4.7 5 11 26 0.12 1000 0.5 5.0 2.5
EEUHD1H4R7( )
200 2000
10 5 11 39 0.12 1000 0.5 5.0 2.5
EEUHD1H100( )
200 2000
22 5 11 65 0.12 1000 0.5 5.0 2.5
EEUHD1H220( )
200 2000
33 5 11 90 0.12 1000 0.5 5.0 2.5
EEUHD1H330( )
200 2000
47 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5
EEUHD1H470( )
200 2000
68 6.3 11.2 110 0.12 1000 0.5 2.5 5.0 2.5
EEUHD1H680( )
200 2000
100 8 11.5 180 0.12 1000 0.6 3.5 5.0
EEUHD1H101( )
200 1000
220 10 12.5 300 0.12 2000 0.6 5.0 5.0
EEUHD1H221( )
200 500
330 10 16 410 0.12 2000 0.6 5.0 5.0
EEUHD1H331( )
200 500
470 10 20 530 0.12 2000 0.6 5.0 5.0
EEUHD1H471( )
200 500
560 16 15 650 0.12 2000 0.8 7.5 7.5
EEUHD1H561S( )
100 250
680 16 15 650 0.12 2000 0.8 7.5 7.5
EEUHD1H681S( )
100 250
1000 12.5 25 950 0.12 2000 0.6 5.0 5.0
EEUHD1H102( )
200 500
2200 16 31.5 1470 0.14 2000 0.8 7.5
EEUHD1H222
100
3300 18 35.5 1770 0.16 2000 0.8 7.5
EEUHD1H332
50
Endurance : 105 °C
05 to 08=1000 h, 010 to 018=2000 h
02 May. 2014
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
