AUIRF1010EZ
AUIRF1010EZS
AUIRF1010EZL
VDSS 60V
RDS(on) typ. 6.8m
max. 8.5m
ID (Silicon Limited) 84A
ID (Package Limited) 75A
Features
Advanced Process Technology
Ultra Low On-Resistance
175°C Operating Temperature
Fast Switching
Repetitive Avalanche Allowed up to Tjmax
Lead-Free, RoHS Compliant
Automotive Qualified *
Description
Specifically designed for Automotive applications, this
HEXFET® Power MOSFET utilizes the latest processing
techniques to achieve extremely low on-resistance per silicon
area. Additional features of this design are a 175°C junction
operating temperature, fast switching speed and improved
repetitive avalanche rating. These features combine to make
this design an extremely efficient and reliable device for use in
Automotive applications and wide variety of other applications.
1 2017-09-18
HEXFET® is a registered trademark of Infineon.
*Qualification standards can be found at www.infineon.com
AUTOMOTIVE GRADE
Symbol Parameter Max. Units
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 84
A
ID @ TC = 100°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 60
ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Package Limited) 75
IDM Pulsed Drain Current 340
PD @TC = 25°C Maximum Power Dissipation 140 W
Linear Derating Factor 0.90 W/°C
VGS Gate-to-Source Voltage ± 20 V
EAS Single Pulse Avalanche Energy (Thermally Limited) 99
mJ
EAS (tested) Single Pulse Avalanche Energy Tested Value 180
IAR Avalanche Current See Fig.15,16, 12a, 12b A
EAR Repetitive Avalanche Energy mJ
TJ Operating Junction and -55 to + 175
TSTG Storage Temperature Range °C
Soldering Temperature, for 10 seconds (1.6mm from case) 300
Mounting torque, 6-32 or M3 screw 10 lbf•in (1.1N•m)
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance
and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless
otherwise specified.
Thermal Resistance
Symbol Parameter Typ. Max. Units
RJC Junction-to-Case ––– 1.11
°C/W
RCS Case-to-Sink, Flat, Greased Surface 0.50 –––
RJA Junction-to-Ambient ––– 62
RJA Junction-to-Ambient ( PCB Mount, steady state) 40
TO-220AB
AUIRF1010EZ D2Pak
AUIRF1010EZS
TO-262
AUIRF1010EZL
S
D
G
S
D
G
S
D
G
D
Base part number Package Type Standard Pack Orderable Part Number
Form Quantity
AUIRF1010EZ TO-220 Tube 50 AUIRF1010EZ
AUIRF1010EZL TO-262 Tube 50 AUIRF1010EZL
AUIRF1010EZS Tube 50 AUIRF1010EZS
Tape and Reel Left 800 AUIRF1010EZSTRL
D2-Pak
G D S
Gate Drain Source
AUIRF1010EZ/S/L
2 2017-09-18
Notes:
Repetitive rating; pulse width limited by max. junction temperature. (See fig. 11)
Limited by TJmax, starting TJ = 25°C, L = 0.077mH, RG = 25, IAS = 51A, VGS =10V. Part not recommended for use above this value.
Pulse width 1.0ms; duty cycle 2%.
Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS.
Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive avalanche performance.
This value determined from sample failure population, starting TJ = 25°C, L = 0.077mH, RG = 25, IAS = 51A, VGS =10V.
When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to
application note #AN-994 : http://www.irf.com/technical-info/appnotes/an-994.pdf
R is measured at TJ approximately 90°C.
Static @ TJ = 25°C (unless otherwise specified)
Parameter Min. Typ. Max. Units Conditions
V(BR)DSS Drain-to-Source Breakdown Voltage 60 ––– ––– V VGS = 0V, ID = 250µA
V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient ––– 0.058 ––– V/°C Reference to 25°C, ID = 1mA
RDS(on) Static Drain-to-Source On-Resistance ––– 6.8 8.5 m VGS = 10V, ID = 51A
VGS(th) Gate Threshold Voltage 2.0 ––– 4.0 V VDS = VGS, ID = 250µA
gfs Forward Trans conductance 200 ––– ––– S VDS = 25V, ID = 51A
IDSS Drain-to-Source Leakage Current ––– ––– 20 µA VDS =60 V, VGS = 0V
––– ––– 250 VDS =60V,VGS = 0V,TJ =125°C
IGSS Gate-to-Source Forward Leakage ––– ––– 200 nA VGS = 20V
Gate-to-Source Reverse Leakage ––– ––– -200 VGS = -20V
Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Qg Total Gate Charge ––– 58 86
nC
ID = 51A
Qgs Gate-to-Source Charge ––– 19 28 VDS = 48V
Qgd Gate-to-Drain Charge ––– 21 32 VGS = 10V
td(on) Turn-On Delay Time ––– 19 –––
ns
VDD = 30V
tr Rise Time ––– 90 ––– ID = 51A
td(off) Turn-Off Delay Time ––– 38 ––– RG= 7.95
tf Fall Time ––– 54 ––– VGS = 10V
LD Internal Drain Inductance ––– 4.5 –––
nH
Between lead,
6mm (0.25in.)
LS Internal Source Inductance ––– 7.5 ––– from package
and center of die contact
Ciss Input Capacitance ––– 2810 –––
pF
VGS = 0V
Coss Output Capacitance ––– 420 ––– VDS = 25V
Crss Reverse Transfer Capacitance ––– 200 ––– ƒ = 1.0MHz, See Fig. 5
Coss Output Capacitance ––– 1440 ––– VGS = 0V, VDS = 1.0V ƒ = 1.0MHz
Coss Output Capacitance ––– 320 ––– VGS = 0V, VDS = 48V ƒ = 1.0MHz
Coss eff. Effective Output Capacitance ––– 510 ––– VGS = 0V, VDS = 0V to 48V
Diode Characteristics
Parameter Min. Typ. Max. Units Conditions
IS Continuous Source Current ––– ––– 84
A
MOSFET symbol
(Body Diode) showing the
ISM Pulsed Source Current ––– ––– 340 integral reverse
(Body Diode) p-n junction diode.
VSD Diode Forward Voltage ––– ––– 1.3 V TJ = 25°C,IS = 51A,VGS = 0V
trr Reverse Recovery Time ––– 41 62 ns TJ = 25°C ,IF = 51A, VDD = 30V
Qrr Reverse Recovery Charge ––– 54 81 nC di/dt = 100A/µs
ton Forward Turn-On Time Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
AUIRF1010EZ/S/L
3 2017-09-18
Fig. 2 Typical Output Characteristics
Fig. 3 Typical Transfer Characteristics Fig. 4 Typical Forward Transconductance
vs. Drain Current
Fig. 1 Typical Output Characteristics
0 20406080100120140
ID,Drain-to-Source Current (A)
0
10
20
30
40
50
60
70
80
90
100
Gfs, Forward Transconductance (S)
TJ = 25°C
TJ = 175°C
4 5 6 7 8 9 10
VGS, Gate-to-Source Voltage (V)
0.1
1
10
100
1000
ID, Drain-to-Source Current )
TJ = 25°C
TJ = 175°C
0.01 0.1 110 100
VDS , Drain-to-Source Voltage (V)
0.1
1
10
100
1000
ID, Drain-to-Source Current (A)
20µs PULSE WIDTH
Tj = 175°C
4.5V
VGS
TOP 15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.5V
0.1 110 100
VDS , Drain-to-Source Voltage (V)
0.1
1
10
100
1000
10000
ID, Drain-to-Source Current (A)
VGS
TOP 15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.5V
20µs PULSE WIDTH
Tj = 25°C
4.5V
AUIRF1010EZ/S/L
4 2017-09-18
Fig 5. Typical Capacitance vs.
Drain-to-Source Voltage
Fig 6. Typical Gate Charge vs.
Gate-to-Source Voltage
Fig 8. Maximum Safe Operating Area
Fig. 7 Typical Source-to-Drain Diode
Forward Voltage
1 10 100
VDS, Drain-to-Source Voltage (V)
0.1
1
10
100
1000
10000
ID, Drain-to-Source Current (A)
1msec
10msec
OPERATION IN THIS AREA
LIMITED BY RDS(on)
100µsec
Tc = 25°C
Tj = 175°C
Single Pulse
0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0
VSD, Source-to-Drain Voltage (V)
0.10
1.00
10.00
100.00
1000.00
ISD, Reverse Drain Current (A)
TJ = 25°C
TJ = 175°C
VGS
= 0V
110 100
VDS, Drain-to-Source Voltage (V)
100
1000
10000
100000
C, Capacitance(pF)
VGS = 0V, f = 1 MHZ
Ciss = Cgs + Cgd, Cds SHORTED
Crss = Cgd
Coss = Cds + Cgd
Coss
Crss
Ciss
0 102030405060
QG Total Gate Charge (nC)
0.0
2.0
4.0
6.0
8.0
10.0
12.0
VGS, Gate-to-Source Voltage (V)
VDS= 48V
VDS= 30V
VDS= 12V
ID= 51A
AUIRF1010EZ/S/L
5 2017-09-18
Fig 10. Normalized On-Resistance
vs. Temperature
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
Fig 9. Maximum Drain Current vs. Case Temperature
1E-006 1E-005 0.0001 0.001 0.01 0.1
t1 , Rectangular Pulse Duration (sec)
0.001
0.01
0.1
1
10
Thermal Response ( Z thJC )
0.20
0.10
D = 0.50
0.02
0.01
0.05
SINGLE PULSE
( THERMAL RESPONSE )
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
J
J
1
1
2
2
3
3
R
1
R
1
R
2
R
2
R
3
R
3
C
C
Ci= iRi
Ci= iRi
Ri (°C/W) i (sec)
0.415 0.000246
0.410 0.000898
0.285 0.009546
-60 -40 -20 020 40 60 80 100 120 140 160 180
TJ , Junction Temperature (°C)
0.5
1.0
1.5
2.0
2.5
RDS(on) , Drain-to-Source On Resistance
(Normalized)
ID = 84A
VGS = 10V
25 50 75 100 125 150 175
TC , Case Temperature (°C)
0
10
20
30
40
50
60
70
80
90
100
ID, Drain Current (A)
Limited By Package
AUIRF1010EZ/S/L
6 2017-09-18
Fig 14. Threshold Voltage vs. Temperature
Fig 12c. Maximum Avalanche Energy
vs. Drain Current
Fig 12a. Unclamped Inductive Test Circuit
Fig 12b. Unclamped Inductive Waveforms
R
G
I
AS
0.01
t
p
D.U.T
L
VDS
+
-V
DD
DRIVER
A
15V
20V
tp
V
(BR)DSS
I
AS
Fig 13b. Gate Charge Test Circuit
Fig 13a. Gate Charge Waveform
Vds
Vgs
Id
Vgs(th)
Qgs1 Qgs2 Qgd Qgodr
-75 -50 -25 025 50 75 100 125 150 175
TJ , Temperature ( °C )
1.0
1.5
2.0
2.5
3.0
3.5
4.0
4.5
VGS(th) Gate threshold Voltage (V)
ID = 250µA
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
0
50
100
150
200
250
300
350
400
EAS , Single Pulse Avalanche Energy (mJ)
ID
TOP 5.7A
9.1A
BOTTOM 51A
AUIRF1010EZ/S/L
7 2017-09-18
Fig 15. Typical Avalanche Current vs. Pulse width
Notes on Repetitive Avalanche Curves , Figures 15, 16:
(For further info, see AN-1005 at www.infineon.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a temperature far in
excess of Tjmax. This is validated for every part type.
2. Safe operation in Avalanche is allowed as long as Tjmax is not exceeded.
3. Equation below based on circuit and waveforms shown in Figures 12a, 12b.
4. PD (ave) = Average power dissipation per single avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase
during avalanche).
6. Iav = Allowable avalanche current.
7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as
25°C in Figure 15, 16).
t
av = Average time in avalanche.
D = Duty cycle in avalanche = tav ·f
Z
thJC(D, tav) = Transient thermal resistance, see Figures 13)
PD (ave) = 1/2 ( 1.3·BV·Iav) = T/ ZthJC
Iav = 2T/ [1.3·BV·Zth]
EAS (AR) = PD (ave)·tav
Fig 16. Maximum Avalanche Energy
vs. Temperature
25 50 75 100 125 150 175
Starting TJ , Junction Temperature (°C)
0
25
50
75
100
EAR , Avalanche Energy (mJ)
TOP Single Pulse
BOTTOM 1% Duty Cycle
ID = 51A
1.0E-06 1. 0E-05 1.0E -04 1. 0E-03 1.0E -02 1.0E-01
tav (sec)
0.1
1
10
100
1000
Avalanche Current (A)
0.05
Duty Cycle = Single Pulse
0.10
Allowed avalanche Current vs
avalanche pulsewidth, tav
assuming Tj = 25°C due to
avalanche losses
0.01
AUIRF1010EZ/S/L
8 2017-09-18
Fig 17. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs
Fig 18a. Switching Time Test Circuit
Fig 18b. Switching Time Waveforms
AUIRF1010EZ/S/L
9 2017-09-18
TO-220AB package is not recommended for Surface Mount Application.
TO-220AB Part Marking Information
YWWA
XX XX
Date Code
Y= Year
WW= Work Week
AUIRF1010EZ
Lot Code
Part Number
IR Logo
TO-220AB Package Outline (Dimensions are shown in millimeters (inches))
AUIRF1010EZ/S/L
10 2017-09-18
D2Pak (TO-263AB) Package Outline (Dimensions are shown in millimeters (inches))
YWWA
XX XX
Date Code
Y= Year
WW= Work Week
AUIRF1010EZS
Lot Code
Part Number
IR Logo
D2Pak (TO-263AB) Part Marking Information
AUIRF1010EZ/S/L
11 2017-09-18
TO-262 Part Marking Information
YWWA
XX XX
Date Code
Y= Year
WW= Work Week
AUIRF1010EZL
Lot Code
Part Number
IR Logo
TO-262 Package Outline (Dimensions are shown in millimeters (inches)
AUIRF1010EZ/S/L
12 2017-09-18
D2Pak (TO-263AB) Tape & Reel Information (Dimensions are shown in millimeters (inches))
3
4
4
TRR
FEED DIRECTION
1.85 (.073)
1.65 (.065)
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
TRL
FEED DIRECTION
10.90 (.429)
10.70 (.421)
16.10 (.634)
15.90 (.626)
1.75 (.069)
1.25 (.049)
11.60 (.457)
11.40 (.449) 15.42 (.609)
15.22 (.601)
4.72 (.136)
4.52 (.178)
24.30 (.957)
23.90 (.941)
0.368 (.0145)
0.342 (.0135)
1.60 (.063)
1.50 (.059)
13.50 (.532)
12.80 (.504)
330.00
(14.173)
MAX.
27.40 (1.079)
23.90 (.941)
60.00 (2.362)
MIN.
30.40 (1.197)
MAX.
26.40 (1.039)
24.40 (.961)
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
AUIRF1010EZ/S/L
13 2017-09-18
Qualification Information
Qualification Level
Automotive
(per AEC-Q101)
Comments: This part number(s) passed Automotive qualification. Infineon’s
Industrial and Consumer qualification level is granted by extension of the higher
Automotive level.
Moisture Sensitivity Level
TO-220AB N/A
TO-262
D2-Pak
ESD
Machine Model Class M4†
AEC-Q101-002
Human Body Model Class H1C†
AEC-Q101-001
Charged Device Model Class C3†
AEC-Q101-005
RoHS Compliant Yes
MSL1
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2015
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any
information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third
party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning customer’s products and any use of
the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies office (www.infineon.com).
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a
failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
Revision History
Date Comments
09/30/2015 Updated datasheet with corporate template
Corrected ordering table on page 1.
09/18/2017 Corrected typo error on part marking on page 9,10,11.
† Highest passing voltage.
