Weller®Stations
76
Ferro-Magnetic Controlled Stations
Tip
Power Switch
Power Supply
Permanent
Magnet
Temperature sensing Device
The Weller Magnastat system operates through
a ferro-magnetic sensing device which chan-
ges its characteristics when specific temperatures
are reached. This causes it to either attract or repel
a permanent magnet which operates a power supp-
ly switch. In this way power to the heating element
can be quickly switched on or off to either provide
extra power for soldering operations or reduced
power when idling. Various pre-selected tip tempe-
ratures are available to permit different types of sol-
dering to be undertaken.
Working temperature selection is achieved by simp-
ly changing the
”temperature sensing“ soldering tip. These are avai-
lable in temperature ratings of 260°C, 316°C, 370°C,
425°C and 480°C. The tips are made of pure copper
for effective heat conductivity.
The heating element has an optimal heating effect
on the tip. This is possible through high precision of
the tubes, the winding and insulation, which means
that the heating element should never be gripped
with pliers or be hammered in any way.
It is quite sufficient to secure the soldering tip by
tightening it into the tip sleeve by hand (when the
iron is cold). The solder is an important factor for
the quality of soldered joints. The most suitable is
copper-free SN 60with a flux core. The flux should
be organic and very easily activated. Fluxes with a
halogen content should not be used. The soldering
operation should be effected in the following order:
heating the solder joint then supply the solder bet-
ween joint and tip. The solder should never be
applied to the tip and then to the soldering joint.
This causes "dry" joints.
Ferro-Magnetic Controlled Stations
Forward
Back
Home
Contents
Print
Search Weller
Search Catalogue
Help
Soldering Irons Weller®
111
Description*
Magnastat soldering iron
60 W, 230 V, controlled temperature
Consists of:
• Soldering iron W61/60 W
• Support AK 1
Soldering tips: CT-Series see page 146.
Magnastat soldering iron
100 W, 230 V, controlled temperature
Consists of:
• Soldering iron W 101/100 W
• Support AK 1
Soldering tips: CT-Series see page 146.
Magnastat soldering iron
200 W, 230 V, controlled temperature
Consists of:
• Soldering iron W 201/200 W
• Support AK 2
Soldering tips: CT-Series see page 146.
Line Voltage Soldering Irons
Model
W 61
D, F 5 61 036 99
GB 5 61 033 99
CH 5 61 035 99
DK 5 61 036 80
I 5 61 036 81
SA, IND 5 61 036 84
IL 5 61 036 85
W 101
D, F 5 61 046 99
GB 5 61 043 99
CH 5 61 045 99
DK 5 61 046 80
I 5 61 046 81
SA, IND 5 61 046 84
IL 5 61 046 85
W 201
D, F 5 61 056 99
GB 5 61 053 99
CH 5 61 055 99
DK 5 61 056 80
I 5 61 056 81
SA, IND 5 61 056 84
IL 5 61 056 85
* see Magnastat description on page 76.
Forward
Back
Home
Contents
Print
Search Weller
Search Catalogue
Help
Weller®Soldering Tips and Nozzles
146
CT-Series
Scope of delivery
For use with: W 61, W 101, W 201
Description and Model Width A Order-No. Order-No. Order-No. Order-No.
260°C 310°C 370°C 425°C
For 60 W soldering iron (W61)
CChhiisseell ttiippstraight 1,6 mm CCTT55AA55CCTT55AA66CCTT55AA77CCTT55AA88
5 42 005 99 5 42 006 99 5 42 007 99 5 42 008 99
2,4 mm CCTT55BB55CCTT55BB66CCTT55BB77CCTT55BB88
5 42 015 99 5 42 016 99 5 42 017 99 5 42 018 99
3,2 mm CCTT55CC55CCTT55CC66CCTT55CC77CCTT55CC88
5 42 025 99 5 42 026 99 5 42 027 99 5 42 028 99
5,0 mm CCTT55DD55CCTT55DD66CCTT55DD77CCTT55DD88
5 42 035 99 5 42 036 99 5 42 037 99 5 42 038 99
CChhiisseell ttiippbent (45°) 1,6 mm CCTT55AAXX55CCTT55AAXX66CCTT55AAXX77CCTT55AAXX88
5 42 105 99 5 42 106 99 5 42 107 99 5 42 108 99
2,4 mm CCTT55BBXX55CCTT55BBXX66CCTT55BBXX77CCTT55BBXX88
5 42 115 99 5 42 116 99 5 42 117 99 5 42 118 99
3,2 mm CCTT55CCXX55CCTT55CCXX66CCTT55CCXX77CCTT55CCXX88
5 42 125 99 5 42 126 99 5 42 127 99 5 42 128 99
5,0 mm CCTT55DDXX55CCTT55DDXX66CCTT55DDXX77CCTT55DDXX88
5 42 135 99 5 42 136 99 5 42 137 99 5 42 138 99
For 100 W soldering iron (W101)
CChhiisseell ttiipp straight 3,2 mm - CCTT66CC66CCTT66CC77CCTT66CC88
-5 42 206 99 5 42 207 99 5 42 208 99
5,0 mm - CCTT66DD66CCTT66DD77CCTT66DD88
-5 42 216 99 5 42 217 99 5 42 218 99
7,0 mm - CCTT66EE66CCTT66EE77CCTT66EE88
-5 42 226 99 5 42 227 99 5 42 228 99
CChhiisseell ttiipp bent (45°) 3,2 mm - CCTT66CCXX66CCTT66CCXX77CCTT66CCXX88
-5 42 306 99 5 42 307 99 5 42 308 99
5,0 mm - CCTT66DDXX66CCTT66DDXX77CCTT66DDXX88
-5 42 316 99 5 42 317 99 5 42 318 99
7,0 mm - CCTT66EEXX66CCTT66EEXX77CCTT66EEXX88
-5 42 326 99 5 42 327 99 5 42 328 99
For 200 W soldering iron (W201)
CChhiisseell ttiipp straight 7,0 mm - CCTT22EE66CCTT22EE77CCTT22EE88
-5 42 406 99 5 42 407 99 5 42 408 99
10,0 mm - CCTT22FF66CCTT22FF77CCTT22FF88
-5 42 416 99 5 42 417 99 5 42 418 99
11,0 mm - CCTT22GG66CCTT22GG77CCTT22GG88
-5 42 426 99 5 42 427 99 5 42 428 99
CChhiisseell ttiipp bent 7,0 mm - CCTT22EEXX66CCTT22EEXX77CCTT22EEXX88
-5 42 506 99 5 42 507 99 5 42 508 99
10,0 mm - CCTT22FFXX66CCTT22FFXX77CCTT22FFXX88
-5 42 516 99 5 42 517 99 5 42 518 99
1Scope of delivery W61
11
11
11
11
Forward
Back
Home
Print
Contents
Search Weller
Search Catalogue
Help
