it Wiha, Premium Tools for Professionals. The Wiha T-handle, flag and key kandle demonstrate their strengths whenever loosening particularly tight screws and fastening screws with high torque values. Mature handle concepts enable the use ofthe complete handle geometry so that itis used as a lever, offering optimum axial power transmission from the hand fothe screw. | Wiha T-Handle, Flag and Key Handle. | > Red: metric hex blades Yellow: inch hex blades & Green: TORX blades Light green: TORX PLUS blades Wiha T-Handle. Ihe ergonomic handle shape permits jwerful torque transmission from handle bblade to screw. The injection moulded T-handle with mgled ends permits a good transmis- jon of force from handle to blade. Since he blades are exposed to a high load, Wha only uses high-quality chrome- Yanadium steels, which, with their lough-hardened blades, demonstrate igh resistance to wear. Wiha Flag and Key Handles. Screwdrivers with these two special hand- le shapes are always used whenever replacing indexable inserts on milling heads or when carrying out high-torque adjustment work. Thanks to the flag or key area below the shaft, it is possible to tighten or loosen screws comfortably with a delicate movement. The cylindrical shaft of the handle is then used to quickly turn the screw in or out. & 365/T Dore MeLWiha. Premium Tools for Professionals. Wiha T-Handle. Hex driver with T-handle. Chrome-vanadium steel, through hardened, nickel plated. Wiha T-handle. For high torque transfer with low effort. Hex driver set with T-handle. Nickel-plated, in bench stand, 7-pces. Extra: Stable metal bench stand to stand or hang tip symbols printed to scale. 334U Hex driver with T-handle. With coated blade. Blade: Chrome-vanadium steel, through hardened, nickel plated. Handle: Wiha T-handle. Application: For high torque transfer with low effort. Extra: With coated blade.