Manual Switches AML26 Series
Electronic Control Rocker
Honeywell1SensingandControl11-800-537-6945USA1F1-815-235-6847International11-800-737-3360Canada31
LED DISPLAY
Rocker operators ordered separately.
LEDs are not replaceable.
FEATURES
1Identical to AML24, except furnished
with one or two rectangular high
efficiency LED’s which give flush
display area and wide angle
indication.
1Available with or without diode
protection for LED’s.
1LED circuit independent of switch
circuit.
Electrical Data page 19
Rockers page 52
Lamps and LEDs page 58
Accessories page 57
Mounting Dimensions pages 59, 62
15 thru 24 VDC LED devices have
internal resistor to maintain current at
nominal 20 mA.
1UL recognized, CSA certified.
**
*AML26 Series: 1 pole and
2-pole only.
AML26 ORDER GUIDE
AML26 F B B 2 AA 01 R X
Housing LED Terminal Type/ Circuitry Operating LED Color LED Color
Type Bezel Color Voltage Diode Protection Codes Action (LED A) (LED B)
AML26 F B B 2 Insert code Insert code RR
1 LED Black V* .110 ×.020 letters numbers Red Red
(Solder or as shown in from YY
AML26 G C Quick-Connect Circuitry Operating Yellow Yellow
2 LED’s 5 V Chart Action GG
3Chart Green Green
D.025 ×.025
LED version
XX
10 V (Printed Ckt.,
available
No LED No LED
or Push-On)
only withE
AA15 V 8
BA.110 ×.020
CAF w/Diode
DA24 V for LED
circuitryprotection
*See LED application information for devices without current-limiting resistor, page 58.
Example: AML26FBB2AA01RX
Rectangular rocker switch; illuminated
with one LED, this device has a black
bezel, .110 ×.020 terminals; with one
circuit ON and one circuit OFF in each
extreme operator position (maintained).
1The ‘‘MICRO SWITCH’’ identification is
shown on this side of the switch housings.
Rocker
ordered
separately
Manuals