www.element14.com
www.farnell.com
www.newark.com
Page <1> V1.126/11/14
Inductive Sensor
M18 - Long Housing
Features:
• Inductive sensor
• DC 3-wire (10-30V DC)
• 3/4 wire Connection mode
• Shielded type (5mm)
• With LED operation indicate lamp, easily identiable
• Brass chrome plated, proof of oil. water acid, alkaline
• Over-current protection
• Widely applied in measuring, Counting, Rpm measuring in
mechanism, chemical, paper manufacture light industry, etc.
Specications:
Style : Cylinder shape
Sensing Distance : 0 to 4mm shielded
Diameter : 18mm
Mounting Distance : Shielded (5mm)
Standard Sensing Object : ferrous metals
Protection Rate : IP67, water resistant
Frequency : 700Hz/400Hz (DC 3/2 wires)
Current Output (DC/AC) : ≤ 200mA
Power Supply : 10 to 30V DC
Ambient temperature : -20°C to +70°C
Against Polarity Reversal : YES
Electrical Connection: Picture of Product
Shielded Dimensions : Millimetres
Installation
If used in an area surrounded by metal, Install the proximity Sensor as follows . (Sn = Sensing distance)
www.element14.com
www.farnell.com
www.newark.com
Page <2> V1.126/11/14
Inductive Sensor
M18 - Long Housing
Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted
for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change
without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any
error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any
assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the
Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence.
Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012.
Part Number Table
Description Connector Model Output Type Part Number
Sensor, M18, NPN, Shielded, NO 3 Wire NPN NO MCPIN-T18L-001
Sensor, M18, NPN, Shielded, NC 3 Wire NPN NC MCPIN-T18L-011
Sensor, M18, NPN, Shielded, NO Straight Plug In Connector NPN NO MCPIN-T18L-101
Sensor, M18, NPN, Shielded, NC Straight Plug In Connector NPN NC MCPIN-T18L-111
Sensor, M18, PNP, Shielded, NO 3 Wire PNP NO MCPIP-T18L-001
Sensor, M18, PNP, Shielded, NC 3 Wire PNP NC MCPIP-T18L-011
Sensor, Inductive, 4mm, 10V-30V Straight Plug In Connector PNP NO MCPIP-T18L-101
Sensor, Inductive, 4mm, 10V-30V Straight Plug In Connector PNP NC MCPIP-T18L-111
Inductive Proximity Application Direction
a. Set mounting distance equal to 80% of Sn.
b. Set mounting distance roughly equal to 50% of Sn when sensor is used measuring mounting frequency or operating
in high speed circumstances.
c. Mounting distance will change depending on material (iron, stainless steel, brass, copper and aluminum).
d. Inductive Proximity series connection and parallel connection