SMD General Purpose Rectifiers
Glass Passivated Type
Reverse Voltage: 200 to 1000 Volts
Forward Current: 3.0 Amp
RoHS Device
Page 1
REV:A
Features
- Glass passivated cavity-free junction.
- Lead less chip form, no lead damage.
- Plastic package has Underwriters lammability
classification 94V-0.
- Low forward voltage drop.
Mechanical data
- Case: Packed with FRP substrate and epoxy underfilled.
- Polarity: Cathode Band, Laser marking.
- Weight: 0.04 grams (approx).
ACGRBT301-HF Thru. ACGRBT305-HF
AQW-JG003
Notes: 1. Thermal resistance from junction to ambient and from junction to lead P.C.B. monuted on 0.2×0.2”(5.0*5.0mm) copper pad areas.
Comchip Technology CO., LTD.
Absolute Maximum Ratings (at TA=25°C unless otherwise noted)
ACGRBT
301-HF
Max. Repetitive peak reverse voltage
Peak forward surge current, 8.3ms
single half sine-wave superimposed
on rate load (JEDEC method)
Max. Average forward current
Operating junction temperature
Storage temperature
ACGRBT
302-HF ACGRBT
303-HF ACGRBT
304-HF ACGRBT
305-HF UnitsSymbolParameter
VRRM
IFSM
IO
TJ
TSTG
200 400
95
3.0
-65 to +175
-65 to +175
600 V
A
A
°C
°C
800 1000
Company reserves the right to improve product design , functions and reliability without notice.
Repetitive peak reverse current
V
uA
Parameter Conditions
Forward voltage
Thermal Resistance
VR =Max. VRRM, TA=25°C
Junction to ambient (Note)
Symbol
IRRM
RθJA
CJ
MIN. TYP. MAX.
5
74
Unit
IF =3.0A 0.94 1.00
0.10
Junction capacitance VR=4V, f=1.0MHZ23 pF
Junction to lead (Note) RθJL 10 °C/W
---
---
---
VF
---
---
---
---
---
Electrical Characteristics (at TA=25°C unless otherwise noted)
Halogen Free
Dimensions in inches and (millimeter)
0.209(5.30)
0.201(5.10)
0.146(3.70)
0.138(3.50)
0.049(1.25)
0.041(1.05)
0.049(1.25)
0.041(1.05)
0.041(1.05)
0.053(1.35)
R0.028(0.71)
2114/DO-214AA
R0.027(0.68)
0.119(3.01)
Typ.
Circuit Diagram
- Comply with AEC-Q101
- Terminals: Pure Tin plated (Lead-Free),solderable
per MIL-STD-750, method 2026.
AQW-JG003
RATING AND CHARACTERISTIC CURVES (ACGRBT301-HF thru ACGRBT305-HF)
Comchip Technology CO., LTD.
Page 2
REV:A
SMD General Purpose Rectifiers
Company reserves the right to improve product design , functions and reliability without notice.
FIG.1 - FORWARD CURRENT DERATING CURVE
FIG.3 - TYPICAL INSTANTANEOUS
FORWARD CHARACTERISTICS
AVERAGE FORWARD RECTIFIED
CURRENT, AMPERES
2.0
2.5
3.0
3.5
1.5
1.0
0.5
IINSTANTANEOUS FORWARD CURRENT,
AMPERES
0.10
1.00
10.00
0.01
0.2 0.4 0.6 0.8 1.0 1.2 1.4
00 25 50 75 100 125 150 175
60Hz
RESISTIVE OR
INDUCTIVE LOAD
LEAD TEMPERATURE, °C
INSTANTANEOUS FORWARD VOLTAGE,
VOLTS
FIG.2 - MAXIMUM NON-REPETITIVE
PEAK FORWARD SURGE CURRENT
PEAK FORWARD SURGE CURRENT,
AMPERES
NUMBER OF CYCLES AT 60Hz
8.3ms SINGLE HALF SINE-WAVE
0
25
50
100
125
75
1 10 100
PERCENT OF RATED PEAK REVERSE VOLTAGE,%
FIG.4 - TYPICAL REVERSE CHARACTERISTICS
INSTANTANEOUS REVERSE LEAKAGE
CURRENT, MICROAMPERES
0.01
.001
0 20
0.10
1.0
10
100
40 60 80 100
FIG.5 - TYPICAL JUNCTION CAPACITANCE
REVERSE VOLTAGE, VOLTS
.1
JUNCTION CAPACITANCE, pF
200
1.0 10 100
10
100
1
TJ=25°C
TJ=25°C
TJ=125°C
TJ=150°C
SMD General Purpose Rectifiers
B C dDD2
D1
E F P P0P1
SYMBOL
W W1
(mm)
(inch) 0.156 ± 0.004 0.219 ± 0.004 0.057 ± 0.004 0.059 ± 0.004 12.992 ± 0.079 1.969 MIN. 0.512 ± 0.020
SYMBOL
(mm)
(inch) 0.069 ± 0.004 0.217 ± 0.002 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.567 MAX.
3.95 ± 0.10 5.55 ± 0.10
8.00 ± 0.10
1.50 ± 0.10
5.50 ± 0.051.75 ± 0.10
50.0 MIN. 13.0 ± 0.501.45 ± 0.10
4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 14.4 MAX.
330 ± 2.00
Reel Taping Specification
o
120
Trailer Device Leader
10 pitches (min)10 pitches (min)
.......
.......
....... ..............
....... ..............
End Start
D1
D
W1
T
C
Direction of Feed
Index hole
d
E
F
B W
P
P0
P1
A
A
D2
Page 3
AQW-JG003
REV:A
Comchip Technology CO., LTD.
Company reserves the right to improve product design , functions and reliability without notice.
(DO-214AA)
2114
(DO-214AA)
2114
SMD General Purpose Rectifiers
Page 4
AQW-JG003
REV:A
Comchip Technology CO., LTD.
Company reserves the right to improve product design , functions and reliability without notice.
Standard Packaging
Case Type
5,000
REEL
( pcs )
Reel Size
(inch)
13
REEL PACK
2114/DO-214AA
Suggested PAD Layout
A
B
SIZE (inch)
0.118MIN.
(mm)
3.00MIN.
2.65MAX.
6.65REF.
0.104MAX.
0.262 REF.
2114/DO-214AA
A
B
CC
Marking Code
30D
Part Number Marking Code
ACGRBT301-HF
ACGRBT302-HF
ACGRBT303-HF
30G
30J
ACGRBT304-HF 30K
ACGRBT305-HF 30M
BGC
.XXX.
XXX = Product type marking code
