© Semiconductor Components Industries, LLC, 2018
February, 2018 − Rev. 0
1Publication Order Number:
NSVP249SDSF3/D
NSVP249SDSF3
PIN Diode
Dual series PIN Diode for
VHF, UHF and AGC
This PIN diode is designed to realize compact and efficient designs.
Two PIN diodes are incorporated in one SC−70 package. The use of
dual PIN diodes can reduce both system cost and board space. This
PIN diode is AEC−Q101 qualified and PPAP capable for automotive
applications.
Features
•Series connection of 2 elements in a small−size package
•Small Interterminal Capacitance (C = 0.23 pF typ)
•Small Forward Series Resistance (rs = 4.5 W max)
•AEC−Q101 qualified and PPAP capable
•Pb−Free, Halogen Free and RoHS Compliance
Typical Applications
•Auto Gain Control for Radio
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS at TA = 25°C
Symbol Parameter Value Unit
VRReverse Voltage 50 V
IFForward Current 50 mA
PAllowable Power Dissipation 100 mW
TJ, Tstg Operating Junction and Storage
Temperature
−55 to +125 °C
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
ELECTRICAL CHARACTERISTICS at TA = 25°C (Note 1)
Symbol Parameter Conditions Min Typ Max Unit
VR Reverse Voltage IR = 10 mA50 − − V
IR Reverse Current VR = 50 V − − 0.1 mA
VF Forward Voltage IF = 50 mA −0.92 −V
C Interterminal Capacitance VR = 50 V, f = 1 MHz −0.23 −pF
rs Series Resistance IF = 10 mA, f = 100 MHz −−4.5 W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
1. The specifications shown above are for each individual diode.
www.onsemi.com
ELECTRICAL CONECTION
MARKING
DIAGRAM
See detailed ordering and shipping information on
page 3 of this data sheet
ORDERING INFORMATION
50 V, 50 mA
rs = 4.5 W max
PIN Diode
1 : Anode
2 : Cathode
3 : Cathode / Anode
MCP3
3
2
1
CASE 419 AJ
NSVP249SDSF3
www.onsemi.com
2
0 0.2 0.4 0.6 0.8 1.0 1.2
0.01
2
3
5
7
0.1
2
3
5
7
1.0
2
3
5
7
10
2
3
5
Forward Current, IF − mA
Forward Voltage, VF − V
TA = 125°C
25°C
−55°C
Figure 1. IF −VF
0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100
0.1
2
3
5
7
0.1 TA = 25°C
f = 1 MHz
Interterminal Capacitance, C −pF
Figure 2. C −VR
Reverse Voltage, VR − V
2
3
5
7
0.1
2
3
5
7
1.0
2
3
5
7
10
2
3
5
0102030405060
Reverse Voltage, VR − V
TA = 75°C
25°C
50°C
Reverse Current, IR − nA
Figure 3. IR −VR
2
3
5
7
10
2
3
5
7
100
2
3
5
7
1000
2
3
5
Series Resistance, rs − W
0 2 3 5 7 10 2 3 5 7 100 2 3 5 7 1000 2
Frequency, f − MHz
Figure 4. rs − f
TA = 25°C
IF = 10 mA
100 mA
1 mA
10 mA
NSVP249SDSF3
www.onsemi.com
3
1.0
2
3
5
7
10
2
3
5
7
100
2
3
5
7
1k
0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10
Figure 5. rs − IF
Resistance, rs − W
Forward Reverse, IF − mA
TA = 25°C
f = 100 MHz
ORDERING INFORMATION
Device Marking Package Shipping †
NSVP249SDSF3T1G GV SC−70 / MCP3
(Pb−Free / Halogen Free)
3,000 / Tape & Reel
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
SC−70 / MCP3
CASE 419AJ
ISSUE O
DATE 30 NOV 2011
MECHANICAL CASE OUTLINE
PACKAGE DIMENSIONS
http://onsemi.com
1
© Semiconductor Components Industries, LLC, 2002
October, 2002 − Rev. 0
Case Outline Number:
XXX
DOCUMENT NUMBER:
STATUS:
NEW STANDARD:
DESCRIPTION:
98AON65442E
ON SEMICONDUCTOR STANDARD
SC−70 / MCP3
Electronic versions are uncontrolled except when
accessed directly from the Document Repository. Printed
versions are uncontrolled except when stamped
“CONTROLLED COPY” in red.
PAGE 1 OF 2
DOCUMENT NUMBER:
98AON65442E
PAGE 2 OF 2
ISSUE REVISION DATE
ORELEASED FOR PRODUCTION FROM SANYO ENACT# TC−00000733 TO ON
SEMICONDUCTOR. REQ. BY D. TRUHITTE.
30 NOV 2011
© Semiconductor Components Industries, LLC, 2011
November, 2011 − Rev. O
Case Outline Number:
419AJ
ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor ’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer ’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body . Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
P
UBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your loc
al
Sales Representative
◊
