HMC633LC4TR-R5 - Analog Devices

Analog Devices Welcomes

Hittite Microwave Corporation

NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED

www.analog.com www.hittite.com

THIS PAGE INTENTIONALLY LEFT BLANK

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

General Description

Features

Functional Diagram

The HMC633LC4 is a GaAs PHEMT MMIC Driver

Amplier in a leadless 4x4 mm ceramic surface mount

package which operates between 5.5 and 17 GHz.

The amplier provides up to 30 dB of gain, +30 dBm

Output IP3, and +23 dBm of output power at 1 dB

gain compression, while requiring 180 mA from a +5V

supply. The HMC633LC4 is an ideal driver amplier

for microwave radio applications from 5.5 to 17 GHz

and may be biased at +5V, 130 mA to provide 2 dB

lower gain with improved PAE. The amplier’s I/Os are

DC blocked and matched to 50 Ohms with no external

matching required.

Gain: 30 dB

P1dB: +23 dBm

Saturated Power: +23.8 dBm @ 24% PAE

Supply Voltage: +5V @180 mA

50 Ohm Matched Input/Output

24 Lead Ceramic 4x4mm SMT Package: 16mm2

Electrical Specications, TA = +25° C, Vdd1-4= 5V, Idd= 180mA [1]

Typical Applications

The HMC633LC4 is ideal for:

• Point-to-Point Radios

• Point-to-Multi-Point Radios & VSAT

• LO Driver for Mixers

• Military & Space

Parameter Min. Typ. Max. Min. Ty p. Max. Units

Frequency Range 5.5 - 9 9 - 17 GHz

Gain 26 30 25 28 dB

Gain Variation Over Temperature 0.030 0.040 0.030 0.040 dB/ °C

Input Return Loss 22 17 dB

Output Return Loss 22 15 dB

Output Power for 1 dB Compression (P1dB) 20 23 18 21 dBm

Saturated Output Power (Psat) 23.8 22 dBm

Output Third Order Intercept (IP3) 30 29 dBm

Noise Figure 10 7dB

Supply Current (Idd) (Idd = Idd1 + Idd2 + Idd3 + Idd4)180 180 mA

[1] Adjust Vgg between -2 to 0V to achieve Idd= 180 mA typical.

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Input Return Loss vs. Temperature Output Return Loss vs. Temperature

Broadband Gain & Return Loss Gain vs. Temperature

P1dB vs. Temperature Psat vs. Temperature

-40

-30

-20

-10

2 4 6 8 10 12 14 16 18 20

S11

S21

S22

RESPONSE (dB)

FREQUENCY (GHz)

2 4 6 8 10 12 14 16 18 20

+25 C

+85 C

-55 C

GAIN (dB)

FREQUENCY (GHz)

-30

-25

-20

-15

-10

-5

2 4 6 8 10 12 14 16 18 20

+25 C

+85 C

-40 C

RETURN LOSS (dB)

FREQUENCY (GHz)

-30

-25

-20

-15

-10

-5

2 4 6 8 10 12 14 16 18 20

+25 C

+85 C

-40 C

RETURN LOSS (dB)

FREQUENCY (GHz)

4 8 12 16 20

+25 C

+85 C

-40 C

P1dB (dBm)

FREQUENCY (GHz)

4 6 8 10 12 14 16 18 20

+25 C

+85 C

-40 C

Psat (dBm)

FREQUENCY (GHz)

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Power Compression @ 11 GHz

Output IP3 vs. Temperature Noise Figure vs. Temperature

Gain & Power vs. Supply Voltage @ 11 GHz Reverse Isolation vs. Temperature

Power Compression @ 17 GHz

-20 -18 -16 -14 -12 -10 -8 -6 -4 -2

Pout (dBm)

Gain (dB)

PAE (%)

Pout (dBm), GAIN (dB), PAE (%)

INPUT POWER (dBm)

-20 -18 -16 -14 -12 -10 -8 -6 -4 -2

Pout (dBm)

Gain (dB)

PAE (%)

Pout (dBm), GAIN (dB), PAE (%)

INPUT POWER (dBm)

2 4 6 8 10 12 14 16 18 20

+25 C

+85 C

-40 C

IP3 (dBm)

FREQUENCY (GHz)

-80

-60

-40

-20

2 5 8 11 14 17 20

+25 C

+85 C

-40 C

ISOLATION (dB)

FREQUENCY (GHz)

4.5 4.7 4.9 5.1 5.3 5.5

Gain

P1dB

Psat

GAIN (dB), P1dB (dBm), Psat (dBm)

Vdd (V)

4 6 8 10 12 14 16 18

+25 C

+85 C

-40 C

NOISE FIGURE (dB)

FREQUENCY (GHz)

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Absolute Maximum Ratings

Drain Bias Voltage

(Vdd1, Vdd2, Vdd3, Vdd4) +5.5V

Gate Bias Voltage (Vgg) -3 to 0V

RF Input Power (RFIN)(Vdd = +5 Vdc) +5 dBm

Channel Temperature 175 °C

Continuous Pdiss (T= 85 °C)

(derate 11.08 mW/°C above 85 °C) 0.99 W

Thermal Resistance

(channel to package bottom) 90.23 °C/W

Storage Temperature -65 to +150 °C

Operating Temperature -40 to +85 °C

Vdd (V) Idd (mA)

4.5 177

5.0 180

5.5 182

Note: Amplier will operate over full voltage ranges shown above

Typical Supply Current vs. Vdd

Gain, Power & Output IP3

vs. Gate Voltage @ 11 GHz

ELECTROSTATIC SENSITIVE DEVICE

OBSERVE HANDLING PRECAUTIONS

120

150

180

210

-0.8 -0.78 -0.76 -0.74 -0.72 -0.7 -0.68

Gain

P1dB

Psat

IP3

Idd

GAIN (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)

Idd (mA)

Vgg (V)

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Outline Drawing

NOTES:

1. PACKAGE BODY MATERIAL: ALUMINA

2. LEAD AND GROUND PADDLE PLATING: 30-80

MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL.

3. DIMENSIONS ARE IN INCHES [MILLIMETERS].

4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.

5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C-

6. ALL GROUND LEADS AND GROUND PADDLE MUST

BE SOLDERED TO PCB RF GROUND.

Package Information

Part Number Package Body Material Lead Finish MSL Rating Package Marking [2]

HMC633LC4 Alumina, White Gold over Nickel MSL3 [1] H633

XXXX

[1] Max peak reow temperature of 260 °C

[2] 4-Digit lot number XXXX

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Pin Descriptions

Pin Number Function Description Interface Schematic

1, 5 - 8, 11 - 14,

18, 21, 23 N/C No connection. These pins may be connected to DC/RF

ground. Performance will not be affected.

2, 4, 15, 17 GND Package Bottom must

be connected to RF/DC ground.

3RFIN This pin is AC coupled

and matched to 50 Ohms.

9Vgg

Gate control for amplier, please follow “MMIC Amplier

Biasing Procedure” Application Note: See application

circuit for required external components.

16 RFOUT This pin is AC coupled

and matched to 50 Ohms.

24, 22,

20, 19

Vdd1, Vdd2,

Vdd3, Vdd4

Power Supply Voltage for the amplier. See application

circuit for required external components.

Component Value

C1 - C5 100 pF

C6 - C10 1000 pF

C11 - C15 2.2 µF

Application Circuit

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Evaluation PCB

The circuit board used in the application should use

RF circuit design techniques. Signal lines should

have 50 Ohm impedance while the package ground

leads and exposed paddle should be connected

directly to the ground plane similar to that shown.

A sufficient number of via holes should be used to

connect the top and bottom ground planes. The

evaluation board should be mounted to an appro-

priate heat sink. The evaluation circuit board shown

is available from Hittite upon request.

List of Materials for Evaluation PCB 115857 [1]

Item Description

J1 - J2 2.92 mm PC Mount K-Connector

VD1 - VD4 DC Pin

C1 - C5 100 pF Capacitor, 0402 Pkg.

C6 - C10 1000 pF Capacitor, 0603 Pkg.

C11 - C15 2.2 µF Capacitor, Tantalum

U1 HMC633LC4 Driver Amplier

PCB [2] 115855 Evaluation PCB

[1] Reference this number when ordering complete evaluation PCB

[2] Circuit Board Material: Rogers 4350

For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824

Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com

Application Support: Phone: 978-250-3343 or apps@hittite.com

DRIVER & GAIN BLOCK AMPLIFIERS - SMT

HMC633LC4

v03.0514

GaAs PHEMT MMIC DRIVER

AMPLIFIER, 5.5 - 17 GHz

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Analog Devices Inc.:

HMC633LC4TR-R5