PART NO. ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Poori 04/9/07 04/9/07 19/9/07Suresh G. C
RELEASED
19-20-TGG
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2007.
TOLERANCES: DRAWN BY:
Poornima
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE: 19-20-TGG
1169636_DWG
M10000495
04/09/07
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 1 OF 2
DWG NO. ELECTRONIC FILE REV
A
04/09/07 A
DATE:
19/09/07
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Dimensions : Millimetres (Inches)
Specifications:
Bodies : Brass per JIS-C3604.
Centre Contact : Brass per JIS-C3604
Beryllium copper per ASTM B196 UNS C17300.
Insulation : PTFE per ASTM D1457 and ASTM D1710.
Connector interface per MIL-STD-348A.
Part to be clean and free of burrs.
Centre contact shall be anti-rotational.
PART NO. ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Poori 04/9/07 04/9/07 19/9/07Suresh G. C
RELEASED
19-20-TGG
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2007.
TOLERANCES: DRAWN BY:
Poornima
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE: 19-20-TGG
1169636_DWG
M10000495
04/09/07
DATE: SIZE
SCALE: NTS U.O.M.: mm (Inches) SHEET: 2 OF 2
DWG NO. ELECTRONIC FILE REV
A
04/09/07 A
DATE:
19/09/07
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Specification Table
Number Description Material Finish Part Number
1 Cap
Brass
Gold 3µ” Minimum
19-20-TGG
2Body I
3Centre Contact I Gold 50µ” Minimum
4Body II Gold 3µ” Minimum
5Insulation I
PTFE
None
6 Washer Stainless Steel
7 Gasket Silicone Red
8 Shell Brass Gold 3µ” Minimum
9Centre Contact II Beryllium Copper Gold 50µ” Minimum
10 Insulation II
PTFE
None
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
