REVISIONS PART NO. 19-20-TGG ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Poori 04/9/07 Suresh 04/9/07 G. C 19/9/07 Specifications: Bodies Centre Contact : Brass per JIS-C3604. : Brass per JIS-C3604 Beryllium copper per ASTM B196 UNS C17300. Insulation : PTFE per ASTM D1457 and ASTM D1710. Connector interface per MIL-STD-348A. Part to be clean and free of burrs. Centre contact shall be anti-rotational. Dimensions : Millimetres (Inches) This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2007. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Poornima DATE: 04/09/07 CHECKED BY: DATE: 04/09/07 SIZE DATE: 19/09/07 SCALE: NTS Suresh APPROVED BY: G.Cook A DWG NO. 19-20-TGG M10000495 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 1169636_DWG SHEET: 1 OF 2 REVISIONS PART NO. ECN # REV DESCRIPTION DRAWN DATE CHECKD DATE APPRVD DATE - A RELEASED Poori 04/9/07 Suresh 04/9/07 G. C 19/9/07 19-20-TGG Specification Table Number Description Material Finish Part Number 1 Cap 2 Body I 3 Centre Contact I Gold 50" Minimum 4 Body II Gold 3" Minimum 5 Insulation I 6 Washer Stainless Steel 7 Gasket Silicone Red 8 Shell Brass Gold 3" Minimum 9 Centre Contact II Beryllium Copper Gold 50" Minimum 10 Insulation II Gold 3" Minimum Brass PTFE None PTFE 19-20-TGG None http://www.farnell.com http://www.newark.com http://www.cpc.co.uk This data sheet and its contents (the "Information") belong to the Premier Farnell Group (the "Group") or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group's liability for death or personal injury resulting from its negligence. SPC MULTICOMP is the registered trademark of the Group. (c) Premier Farnell plc 2007. TOLERANCES: UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE FOR REFERENCE PURPOSES ONLY. DRAWING TITLE: DRAWN BY: Poornima DATE: 04/09/07 CHECKED BY: DATE: 04/09/07 SIZE DATE: 19/09/07 SCALE: NTS Suresh APPROVED BY: G.Cook A DWG NO. 19-20-TGG M10000495 U.O.M.: mm (Inches) REV ELECTRONIC FILE A 1169636_DWG SHEET: 2 OF 2