JV
1
en_ds_61139_0001: 010705D
SPECIFICATIONS
TYPICAL APPLICATIONS
ORDERING INFORMATION
FLAT TYPE POWER RELAY JV RELAYS
22
.866 16
.630
10.9
.429
mm inch
FEATURES
• Flat type: 16 mm (length) × 22 mm (width) × 10.9 mm (height)
(.630×.866×.429 inch)
• High capacity type (16A) available
• High sensitivity type (100 mW: 1 Form A) available
• TÜV also approved
Coil
Contact Standard type High capacity
type
High
sensitivity type
Arrangement 1 Form A 1 Form C 1 Form A 1 Form A
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A) 50 mΩ
Contact material Silver alloy
Rating
(resistive)
Nominal switching
capacity
10 A 125 V AC
10 A 125 V AC (N.O.)
6 A 125 V AC (N.C.)
16 A 125 V AC 10 A 125 V AC
Max. switching power 1,250 VA
1,250 VA (N.O.)
750 VA (N.C.)
2,000 VA 1,250 V
Max. switching voltage 125 V AC
Max. switching current 10 A 10 A (N.O.)
6 A (N.C.) 16 A 10 A
Expected life (min. ope.)
Mechanical at (180 cpm) 107
Electrical at resistive
(at 20 cpm)
(at rated load)
Sealed type 1051053×1045×104
Flux-resistant
type 3×105105105105
1 Form A type 1 Form C type
Nominal
operating
power
Standard type 200 mW (up to 48 V coil type)
600 mW (100 V coil type)
400 mW (up to 48 V coil type)
600 mW (100 V coil type)
High capacity type —
High sensitivity type 100 mW —
Characteristics
Max. operating speed 20 cpm
Initial insulation resis-
tance*1Min. 100 MΩ
(at 500 V DC)
Initial
break-
down
voltage*2
Between open
contacts 1,000 Vrms
for 1 min.
Between con-
tacts and coil 1,500 Vrms
for 1 min.
Operate time*3
(at nominal voltage) Approx. 10 ms
Approx. 5 ms
(100 V DC coil type)
Release time (without diode)*
3
(at nominal voltage) Approx. 4 ms
Temperature rise
(at 50°C)
Max. 65
°
C with nominal
coil voltage across
coil and at nominal
switching capacity
Shock
resistance
Functional*4Min. 98 m/s2 {10 G}
Destructive*5Min. 980 m/s2
{100 G}
Vibration
resistance
Functional*610 to 55 Hz
at double amplitude
of 1.0 mm
Destructive 10 to 55 Hz
at double amplitude
of 1.6 mm
Conditions for opera-
tion, tran sport and
storage*
7
(Not freezing and
condensin g at low
temperature)
Ambient
temp. –40°C to +70°C*8
–40°F to +158°F
Humidity 5 to 85%R.H.
Unit weight Approx. 8 g .282 oz
Remarks
* Specifications will vary with foreign standards certification ratings.
*1Measurement at same location as "Initial breakdown voltage"section
*2Detection current: 10mA
*3Excluding contact bounce time
*4Half-wave pulse of sine wave: 11ms, detection time: 10µs
*5Half-wave pulse of sine wave: 6ms
*6Detection time: 10µs
*7
Refer to 5. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT
(see catalog)
.
*8100V type: –40 to + 60°C –40 to + 140°F
1
.
H
ome app
li
ances:
Ai
r con
diti
oners,
h
ea
t
ers, e
t
c.
2. Automotive: Power supply for car stereo and air conditioner
Contact arrangement
1: 1 Form C
1a: 1 Form A Nil: Standard type
P: High capacity type* Nil: Sealed type
F: Flux-resistant type
Nil: Standard type
(1 Form A: 200 mW, 1Form C: 400 mW
100 V DC coil type: 600 mW)
S: High sensitivity type*
(1 Form A: 100 mW)
Rating Protective construction Sensitivity Coil voltage (DC)
5, 6, 9, 12, 18,
24, 48, 100V
Ex. JV 1a P F S 12V
* Only for 1 Form A typeNotes:
UL/CSA, TÜV approved type is standard.
1. Standard packing: Carton: 50 pcs.; Case: 1,000 pcs.
2. Coil voltage DC 48, 100 V types are not available for high sensitivity type.
Discontinued
JV
2en_ds_61139_0001: 010705D
TYPES
COIL DATA (at 20°C 68°F)
Contact arrangement Coil voltage, V DC Part No.
Sealed type Flux-resistant type
1 Form A
Standard type
5 JV1a-5V JV1aF-5V
6 JV1a-6V JV1aF-6V
9 JV1a-9V JV1aF-9V
12 JV1a-12V JV1aF-12V
18 JV1a-18V JV1aF-18V
24 JV1a-24V JV1aF-24V
48 JV1a-48V JV1aF-48V
100 JV1a-100V JV1aF-100V
1 Form A
High capacity type
5 JV1aP-5V JV1aPF-5V
6 JV1aP-6V JV1aPF-6V
9 JV1aP-9V JV1aPF-9V
12 JV1aP-12V JV1aPF-12V
18 JV1aP-18V JV1aPF-18V
24 JV1aP-24V JV1aPF-24V
48 JV1aP-48V JV1aPF-48V
100 JV1aP-100V JV1aPF-100V
1 Form A
High sensitivity type
5 JV1aS-5V JV1aFS-5V
6 JV1aS-6V JV1aFS-6V
9 JV1aS-9V JV1aFS-9V
12 JV1aS-12V JV1aFS-12V
18 JV1aS-18V JV1aFS-18V
24 JV1aS-24V JV1aFS-24V
1 Form C
5 JV1-5V JV1F-5V
6 JV1-6V JV1F-6V
9 JV1-9V JV1F-9V
12 JV1-12V JV1F-12V
18 JV1-18V JV1F-18V
24 JV1-24V JV1F-24V
48 JV1-48V JV1F-48V
100 JV1-100V JV1F-100V
Part No. Nominal voltage,
V DC Pick-up voltage,
V DC (max.) Drop-out
voltage,
V DC (min.) Coil resistance,
Ω (±10%) Nominal operat-
ing current, mA
(±10%)
Nominal
operating power,
mW
Max. allowable
voltage,
V DC
1 Form A
(Standard type &
High capacity
type)
5 4.0 0.25 125 40 200 7.5
6 4.8 0.3 180 33.3 200 9
9 7.2 0.45 405 22.2 200 13.5
12 9.6 0.6 720 16.7 200 18
18 14.4 0.9 1,620 11.1 200 27
24 19.2 1.2 2,880 8.3 200 36
48 38.4 2.4 11,520 4.2 200 72
100 48 3 16,600 6 600 110
1 Form A
(High sensitivity
type)
5 4.0 0.25 250 20 100 9
6 4.8 0.3 360 16.7 100 10.8
9 7.2 0.45 810 11.1 100 16.2
12 9.6 0.6 1,440 8.3 100 21.6
18 14.4 0.9 3,240 5.6 100 32.4
24 19.2 1.2 5,760 4.2 100 43.2
1 Form C
5 4.0 0.25 62.5 80 400 6.5
6 4.8 0.3 90 66.7 400 7.8
9 7.2 0.45 202.5 44.4 400 11.7
12 9.6 0.6 360 33.3 400 15.6
18 14.4 0.9 810 22.2 400 23.4
24 19.2 1.2 1,440 16.7 400 31.2
48 38.4 2.4 5,760 8.3 400 62.4
100 70 5 16,600 6 600 110
JV
3
en_ds_61139_0001: 010705D
DIMENSIONS mm inch
REFERENCE DATA
1 Form A type
10.5
.413
0.4
.016
4
.157
22
.866
17.78
.700
10.16
.400
16
.630
12.7
.500
NO NCCOM
21
354
Dimension : General tolerance
Max. 1mm .039 inch ±0.2 ±.008
1 to 5mm .039 to .197 inch ±0.3 ±.012
Min. 5mm .197 inch ±0.4 ±.016
PC board pattern (Copper-side view)
Tolerance: ±0.1 ±.004
12.7
.500
17.78
.700
10.16
.400
2-0.9 dia.
2-.035 dia.
2-1.3 dia.
2-.051 dia.
1 Form C type
10.5
.413
0.4
.016
4
.157
22
.866
17.78
.700
10.16
.400 7.62
.300
16
.630
12.7
.500
NO NCCOM
21
354
Dimension : General tolerance
Max. 1mm .039 inch ±0.2 ±.008
1 to 5mm .039 to .197 inch ±0.3 ±.012
Min. 5mm .197 inch ±0.4 ±.016
PC board pattern (Copper-side view)
Tolerance: ±0.1 ±.004
12.7
.500
17.78
.700
10.16
.400 7.62
.300
2-0.9 dia.
2-.035 dia.
3-1.3 dia.
3-.051 dia.
1.-(1) Maximum value for switching capacity
(1 Form A type) 1.-(2) Maximum value for switching capacity
(1 Form C type) 2.-(1) Operate/release time
(Standard 1 Form A type)
1
10 100 1,000
10
16
100
Contact voltage, V
Contact current, A
High capacity type, AC resistive load
Standard type, AC resistive load
AC resistive load (NO side)
1
10 100 1,000
10
100
Contact voltage, V
Contact current, A
0 80 100 120 140 160 180
2
4
6
8
10
12
14
16
18
Coil applied voltage, %V
Operate/release time, ms
Operate time
Release time
Max.
Max.
Min.
Min.
x
–
x
–
2
.-
(2)
O
pera
t
e
/
re
l
ease
ti
me
(High capacity 1 Form A type)
2
.-
(3)
O
pera
t
e
/
re
l
ease
ti
me
(1
F
orm
C
t
ype
)3
.-
(1)
C
o
il
t
empera
t
ure r
i
se
(1
F
orm
A
t
ype
)
Measured portion: Inside the coil
0 80 100 120 140 160 180
2
4
6
8
10
12
14
16
18
Max.
Min.
Min.
–
x
–
Coil applied voltage, %V
Operate/release time, ms
Operate time
Release time Max.
x
0 80 100 120 140 160
2
4
6
8
10
Max.
Min.
Min.
x
–
x
–
Coil applied voltage, %V
Operate/release time, ms
Operate time
Release time Max.
80 100 120 140 160 180
20
40
60
80
0
Coil a
pp
lied volta
g
e
,
%V
Temperature rise, °C
15 A at 60°C 140°F
(High capacity type)
15 A at 26°C 79°F
(High capacity type)
10 A at
15°C 59°F
(Standad type)
10 A at
60°C 140°F
(Standad type)
3.-(2) Coil temperature rise
(1 Form C type)
Measured portion: In side the coil
3.-(3) Coil temperature rise
(High sensitivity type)
Measured portion: Inside the coil
4. Life curve
Operation frequency: 20 times/min.
(ON/OFF = 1.5s:1.5s)
Ambient temperature: Room temperature
80 100 120 140 160 180
20
40
60
80
0
Coil applied voltage, %V
Temperature rise, °C
10 A
at 25°C 77°F
0
20
40
60
0
Coil applied voltage, %V
Temperature rise, °C
100 120 140 160 180 200
Standard 200 mW type
High sensitivity 100 mW type
Contact current, A
Life, ×104
10
1
100
4681012141618
125V AC resistive load
JV
4en_ds_61139_0001: 010705D
Types dedicated to a wider variety of automotive applications are available, upon receipt of order, with the following specifications:
For Cautions for Use, see Relay Technical Information (see catalog).
5.-(1) Ambient temperature characteristics
(Standard 10 A type, 1 Form A)
Contact current: 10 A
5.-(2) Ambient temperature characteristics
(High capacity 15 A type, 1 Form A)
Contact cu rrent: 0 A, 10 A, 13 A, 15 A
5.-(3) Ambient temperature characteristics
(1 Form C type)
Contact current: 10 A
200 40 60 80 100 120
100
200
300
Ambient temperature, °C
Coil applied voltage, %V
Allowable ambient temperatures
against % coil voltage
(max. inside the coil temperature
set as 115°C 239°F)
Pick-up voltage with
a hot-start condition
of 100%V on the coil
Pick-up voltage
200 40 60 80 100 120
100
200
300
Ambient temperature, °C
Coil applied voltage, %V
Allowable ambient
temperature against
% coil voltages
(max. inside the coil
temperature set as
115°C 239°F)
Pick-up voltage with
a hot-start condition
of 100%V on the coil
10 A Pick-up voltage
0 A
13 A 15 A
0 A
10 A
13 A
15 A
200 406080
100
200
Ambient temperature, °C
Coil applied voltage, %V
Pick-up voltage
Allowable ambient temperatures
against % coil voltages
(max. inside the coil temperature
set as 115°C 239°F)
5.-(4) Ambient temperature characteristics
(High sensitivity type)
Contact current: 10 A
0
100
200
300
0
Temperature rise, °C
Coil applied voltage, %V
20 40 60 80 100 120
Allowable ambient
temperature
against % coil
voltages (max.
inside the coil temperature
set as 115°C 239°F)
High sensitivity
100 mW type
Standard
200 mW type
SPECIFICATIONS
Contact
Coil
Characteristics
Arrangement 1 Form C
Initial contact resistance, max.
(By voltage drop 6 V DC 1 A) 100 mΩ
Contact material Silver alloy
Rating
(resistive
load)
Nominal switching capacity 10 A 125 V AC
6A 30 V DC
Max. switching power 1,250 V AC
180 W
Max. switching voltage 125 V (AC) 30 V (DC)
Max. switching current 10 A (AC) 6 A (DC)
Expected
life (min.
ope.)
Mechanical (at 300 cpm) 5×106
Electrical
(DC 12 V mo tor, 6 A steady curre nt,
20 A lock current)(at rated load)
4×104
Nominal voltage, V DC 5, 6, 9, 12, 18, 24
Nominal operating power 450 mW
Pick-up voltage, V DC (max.) 70% of nominal voltage
Drop-out voltage; V DC (min.) 5% of nominal voltage
Max. allowable voltage 150% of nominal voltage
Max. operating speed 20 cpm
Initial insulation resistance Min. 100 MΩ (at 500 V DC)
Initial break
down voltage
Between open contacts
750 Vrms for 1 min.
Between contacts and coil
1,500 Vrms for 1 min.
Operate time (at nominal voltage) Approx. 5 ms
Release time (at nominal voltage) Approx. 4 ms
Temperature rise (max.)
(at nominal voltage)(at 50°C)
65
°
C with nominal coil voltag e an d at
maximum allowab le contact current
Shock resistance Functional Min. 196 m/s2 {20 G}
Destructive Min. 980 m/s2 {100 G}
Vibration resistance Functional 10 to 55 Hz at double amplitude of
1.6 mm
Destructive 10 to 55 Hz at double amplitude of
2 mm
Conditions for operation,
transport and storage
(Not freezing and condens-
ing at low temperature)
Ambient
temp. –40°C to +70°C
–40°F to +158°F
Humidity 5 to 85%R.H.
Unit weight Approx. 8 g .282 oz
