(1/3) Chip Beads(SMD Array) For General Signal Line Conformity to RoHS Directive MZA Series MZA3216 Type APPLICATIONS High-frequency noise countermeasure in computers, printers, VCRs, televisions, portable telephones, and other equipment. PRODUCT IDENTIFICATION MZA 3216 R 121 A T (1) (2) (3) (4) (5) (6) (1) Series name (2) Dimensions Lx W (3) Material code (4) Nominal impedance 121:120 at 100MHz (5) Characteristic type (6) Packaging style T:Taping RECOMMENDED SOLDERING CONDITION REFLOW SOLDERING SHAPES AND DIMENSIONS/RECOMMENDED PC BOARD PATTERN (REFLOW SOLDERING) 3.20.2 0.80.1 0.40.15 0.4 0.8 Weight: 20mg 2.6 Terminal electrode 0.6 1.60.2 0.15min. Ferrite 0.80.2 FEATURES * A single MZA series chip provides noise attenuation for four lines, making it ideal for use with I/O lines of various highly miniaturized. * Electronic equipment, such as portable products, which comprise high density circuitry. * Low crosstalk between adjacent circuits. * Internal electrodes feature low DC resistance, minimizing wasteful power consumption. * Electroplated terminal electrodes accommodate reflow soldering. * Monolithic structure ensures high reliability. * The products contain no lead and also support lead-free soldering. * It is a product conforming to RoHS directive. Dimensions in mm TEMPERATURE RANGES Operating/storage -55 to +125C PACKAGING STYLE AND QUANTITIES Packaging style Taping Quantity 4000 pieces/reel HANDLING AND PRECAUTIONS * Before soldering, be sure to preheat components. The preheating temperature should be set so that the temperature difference between the solder temperature and product temperature does not exceed 150C. * After mounting components onto the printed circuit board, do not apply stress through board bending or mishandling. * Do not expose the inductors to stray magnetic fields. * Avoid static electricity discharge during handling. * When hand soldering, apply the soldering iron to the printed circuit board only. Temperature of the iron tip should not exceed 350C. Soldering time should not exceed 3 seconds. * This product does not apply to flow soldering construction method. 10s max. 250 to 260C Natural cooling 230C 180C 150C Preheating 60 to 120s Soldering 30 to 60s Time(s) * Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications. * Please contact our Sales office when your application are considered the following: The device's failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.) * All specifications are subject to change without notice. 007-01 / 20071025 / e9421_mza.fm (2/3) ELECTRICAL CHARACTERISTICS Impedance() 25%[100MHz] 120 300 600 1000 60 120 300 600 60 120 240 600 1000 120 240 300 Part No. MZA3216R121A MZA3216R301A MZA3216R601A MZA3216R102A MZA3216S600A MZA3216S121A MZA3216S301A MZA3216S601A MZA3216Y600B MZA3216Y121B MZA3216Y241B MZA3216Y601B MZA3216Y102B MZA3216D121C MZA3216D241C MZA3216D301C DC resistance ()max. 0.18 0.4 0.45 0.6 0.2 0.2 0.4 0.5 0.2 0.2 0.3 0.5 0.6 0.45 0.6 0.8 Rated current (mA)max. 250 200 200 150 300 250 200 200 300 250 200 200 150 200 150 100 Rated voltage (V)max. 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Test equipment: E4991A or equivalent Test tool: 16192A or equivalent Test temperature: 2510C TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MZA3216R121A MZA3216R301A R X 10 100 Frequency (MHz) 1000 R 10 100 Frequency (MHz) 1000 Z R X 1 10 100 1000 Frequency (MHz) Impedance() X 100 1000 Frequency (MHz) 10000 0 R X 1 10 100 Frequency (MHz) 1000 Z R X 1 10 100 1000 Frequency (MHz) 10000 MZA3216Y600B R X 10 200 180 160 140 120 100 80 60 40 20 0 10000 Z 1 Z MZA3216S121A 1000 900 800 700 600 500 400 300 200 100 R 10 10 100 Frequency (MHz) MZA3216S601A Z 1 0 1000 MZA3216S301A 0 1 200 180 160 140 120 100 80 60 40 20 X 500 450 400 350 300 250 200 150 100 50 X Impedance() Z 1 R MZA3216S600A Impedance() Impedance() 2500 2250 2000 1750 1500 1250 1000 750 500 250 0 Z Impedance() 1 1000 900 800 700 600 500 400 300 200 100 0 Impedance() Z MZA3216R102A Impedance() 1000 900 800 700 600 500 400 300 200 100 0 Impedance() Impedance() 300 270 240 210 180 150 120 90 60 30 0 MZA3216R601A 100 1000 Frequency (MHz) 10000 200 180 160 140 120 100 80 60 40 20 0 Z R X 1 10 100 1000 Frequency (MHz) 10000 * All specifications are subject to change without notice. 007-01 / 20071025 / e9421_mza.fm (3/3) R X 1 10 100 Frequency (MHz) 0 1000 2500 2250 2000 1750 1500 1250 1000 750 500 250 0 Z R X 1 Z R X 1 10 100 1000 Frequency (MHz) 10000 MZA3216D121C Impedance() Impedance() MZA3216Y102B 1000 900 800 700 600 500 400 300 200 100 0 Impedance() Z 500 450 400 350 300 250 200 150 100 50 MZA3216Y601B 10 100 Frequency (MHz) 900 1600 800 1400 700 1200 600 Z 500 R 400 300 X 10 100 Frequency (MHz) 1000 200 10 100 Frequency (MHz) Z R 600 100 1 1 800 400 0 X 1000 200 1000 R Z MZA3216D241C Impedance() 300 270 240 210 180 150 120 90 60 30 0 Impedance() Impedance() TYPICAL ELECTRICAL CHARACTERISTICS Z, X, R vs. FREQUENCY CHARACTERISTICS MZA3216Y121B MZA3216Y241B 0 1000 X 1 10 100 1000 Frequency (MHz) 10000 R Z 1 10 X 100 1000 Frequency (MHz) 10000 PACKAGING STYLES REEL DIMENSIONS TAPE DIMENSIONS Sprocket hole 1.5 +0.1 -0.0 Cavity 1.1max. 2.00.2 4.00.1 4.00.1 2.00.05 2.00.5 o130.5 3.60.2 o602.0 8.00.3 1.0 3.50.05 2000 1800 1600 1400 1200 1000 800 600 400 200 0 1.750.1 Impedance() MZA3216D301C 9.00.3 13.01.4 160min. Taping 200min. o210.8 o1782.0 Dimensions in mm Drawing direction 300min. Dimensions in mm * All specifications are subject to change without notice. 007-01 / 20071025 / e9421_mza.fm