DATASHEET SINGLE CHIP PC AUDIO SYSTEM 92HD91 CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Description Features The 92HD91 single-chip audio system is a low power optimized, high fidelity, 4-channel audio codec with integrated speaker amplifier, capless headphone amplifier, and low drop out voltage regulator. * 4 Channels (2 stereo DACs and 2 stereo ADCs) with 24-bit resolution * * * The high integration of the 92HD91 enables the smallest PCB footprint with the lowest system BOM count and cost. 92HD91 provides high quality HD Audio capability to notebook and business desktop PC applications. * 3W/channel Class-D stereo BTL speaker amplifier @ 4 ohms and 5V * * Capless headphone amplifier with charge pump/LDO * Combo Jack Support allowing for dual-function headphone and headset detection Speaker Protection * * TSITM CONFIDENTIAL 1 10 band hardware parametric equalizer Hardware compressor limiter * * (c)2014 TEMPO SEMICONDCUTOR, INC. Supports full-duplex stereo audio and simultaneous VoIP Provides a mono output 2.1 audio crossover support Dedicated BTL high pass filter Mono bandpass filter * Full HDA015-B low power support * Internal digital core LDO voltage regulator * Microsoft WLP desktop premium logo compliant * Dual SPDIF for WLP compliant support of simultaneous HDMI and SPDIF output * Support for 1.5V and 3.3V HDA signaling * Two digital microphone inputs (mono, stereo, or quad microphones) * Microphone Mute Input (on WB revisions and beyond) * High performance analog mixer * 2 adjustable VREF Out pins for analog microphone bias * 6 analog ports with port presence detect (5 single ended, 1 BTL) * Analog and digital PC Beep support * AUX Audio Mode for playback and record * 48-pad QFN RoHS packages in Commercial and Industrial Temperature Ranges V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Full HDA015-B low power support * Audio inactivity transitions codec from D0 to D3 low power mode * Resume from D3 to D0 with audio activity in < 10 msec * D3 to D0 transition with < -65dB pop/click * Port presence detect in D3 with or without bit clock * PC beep wake up in D3 * Additional vendor specific modes for even lower power Software Support * Intuitive TSI HD Sound graphical user interface that allows configurability and preference settings * 12 band fully parametric equalizer * Constant, system-level effects tuned to optimize a particular platform can be combined with user-mode "presets" tailored for specific acoustical environments and applications * System-level effects automatically disabled when external audio connections made * Dynamics Processing * Enables improved voice articulation * Compressor/limiter allows higher average volume level without resonances or damage to speakers. * TSI Vista APO wrapper * Enables multiple APOs to be used with the TSI Driver * Microphone Beam Forming, Acoustic Echo Cancellation, and Noise Suppression * Dynamic Stream Switching * Improved multi-streaming user experience with less support calls * Broad 3rd party branded software including Creative, Dolby, DTS, and SRS TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 2 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO TABLE OF CONTENTS 1. DESCRIPTION ........................................................................................................................ 11 1.1. Overview ..........................................................................................................................................11 1.2. Orderable Part Numbers ..................................................................................................................11 2. DETAILED DESCRIPTION ..................................................................................................... 12 2.1. Port Functionality .............................................................................................................................12 2.1.1. Port Characteristics ............................................................................................................13 2.1.2. Vref_Out .............................................................................................................................15 2.1.3. Jack Detect ........................................................................................................................15 2.1.4. SPDIF Output .....................................................................................................................15 2.2. Mono Output ....................................................................................................................................17 2.3. Mono output Band-Pass Filter .........................................................................................................18 2.3.1. Filter Description ................................................................................................................18 2.4. Mixer ................................................................................................................................................18 2.5. ADC Multiplexers .............................................................................................................................18 2.6. Power Management .........................................................................................................................19 2.7. AFG D0 ............................................................................................................................................20 2.8. AFG D1 ............................................................................................................................................20 2.9. AFG D2 ............................................................................................................................................20 2.10. AFG D3 ..........................................................................................................................................20 2.10.1. AFG D3cold .....................................................................................................................20 2.11. Vendor Specific Function Group Power States D4/D5 ..................................................................20 2.12. Low-voltage HDA Signaling ...........................................................................................................21 2.13. Multi-channel capture ....................................................................................................................21 2.14. EAPD .............................................................................................................................................23 2.15. Digital Microphone Support ...........................................................................................................27 2.16. Analog PC-Beep ............................................................................................................................31 2.17. Digital PC-Beep .............................................................................................................................33 2.18. Headphone Drivers ........................................................................................................................34 2.19. BTL Amplifier .................................................................................................................................34 2.20. BTL Amplifier High-Pass Filter .......................................................................................................34 2.20.1. Filter Description ..............................................................................................................35 2.21. EQ ..................................................................................................................................................35 2.22. Combo Jack Detection ...................................................................................................................35 2.23. GPIO ..............................................................................................................................................36 2.23.1. GPIO Pin mapping and shared functions .........................................................................36 2.23.2. SPDIF/Digital Microphone/GPIO Selection ......................................................................36 2.23.3. Digital Microphone/GPIO Selection .................................................................................36 2.24. HD Audio HDA015-B support ........................................................................................................36 2.25. Digital Core Voltage Regulator ......................................................................................................37 2.26. Aux Audio Support .........................................................................................................................38 2.26.1. General conditions in Aux Audio Mode: ...........................................................................38 2.26.2. Entering Aux Audio Mode ................................................................................................39 2.26.3. "Playback Path" Port Behavior (AnaIog I/O) ....................................................................40 2.26.4. When Port E presence detect = 0 ....................................................................................40 2.26.5. When Port E presence detect = 1 ....................................................................................40 2.26.6. "Record Path" Port Behavior (Analog I/O) .......................................................................41 2.26.7. SYSTEM DIAGRAMS (Analog I/O) ..................................................................................41 2.26.8. EAPD ...............................................................................................................................43 2.26.9. Analog PC_Beep .............................................................................................................43 2.26.10. Class-D BTL Issues .......................................................................................................44 2.26.11. Firmware/Software Requirements: .................................................................................44 2.27. Microphone Mute Input ..................................................................................................................44 3. CHARACTERISTICS ............................................................................................................... 45 3.1. Electrical Specifications ...................................................................................................................45 3.1.1. Absolute Maximum Ratings ...............................................................................................45 3.1.2. Recommended Operating Conditions ................................................................................45 3.2. 92HD91 Analog Performance Characteristics .....................................................................................46 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 3 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3.3. Class-D BTL Amplifier Performance ................................................................................................50 3.4. Capless Headphone Supply Characteristics ....................................................................................51 3.5. AC Timing Specs .............................................................................................................................51 3.5.1. HD Audio Bus Timing .........................................................................................................51 3.5.2. SPDIF Timing .....................................................................................................................52 3.5.3. Digital Microphone Timing .................................................................................................52 3.5.4. GPIO Characteristics .........................................................................................................52 4. FUNCTIONAL BLOCK DIAGRAM .......................................................................................... 53 5. WIDGET DIAGRAM ................................................................................................................ 54 6. PORT AND PIN CONFIGURATIONS ..................................................................................... 55 6.1. Port Configurations ..........................................................................................................................55 6.2. Pin Configuration Default Register Settings .....................................................................................56 7. WIDGET INFORMATION ........................................................................................................ 57 7.1. Widget List .......................................................................................................................................58 7.2. Reset Key ........................................................................................................................................59 7.3. Root (NID = 00h): VendorID ............................................................................................................59 7.3.1. Root (NID = 00h): RevID ....................................................................................................60 7.3.2. Root (NID = 00h): NodeInfo ...............................................................................................60 7.4. AFG (NID = 01h): NodeInfo .............................................................................................................61 7.4.1. AFG (NID = 01h): FGType .................................................................................................61 7.4.2. AFG (NID = 01h): AFGCap ................................................................................................62 7.4.3. AFG (NID = 01h): PCMCap ...............................................................................................63 7.4.4. AFG (NID = 01h): StreamCap ............................................................................................64 7.4.5. AFG (NID = 01h): InAmpCap .............................................................................................65 7.4.6. AFG (NID = 01h): PwrStateCap .........................................................................................66 7.4.7. AFG (NID = 01h): GPIOCnt ...............................................................................................67 7.4.8. AFG (NID = 01h): OutAmpCap ..........................................................................................87 7.4.9. AFG (NID = 01h): PwrState ...............................................................................................68 7.4.10. AFG (NID = 01h): UnsolResp ..........................................................................................69 7.4.11. AFG (NID = 01h): GPIO ...................................................................................................70 7.4.12. AFG (NID = 01h): GPIOEn ...............................................................................................71 7.4.13. AFG (NID = 01h): GPIODir ..............................................................................................72 7.4.14. AFG (NID = 01h): GPIOWakeEn .....................................................................................73 7.4.15. AFG (NID = 01h): GPIOUnsol ..........................................................................................72 7.4.16. AFG (NID = 01h): GPIOSticky .........................................................................................73 7.4.17. AFG (NID = 01h): SubID ..................................................................................................73 7.4.18. AFG (NID = 01h): GPIOPlrty ............................................................................................74 7.4.19. AFG (NID = 01h): GPIODrive ...........................................................................................75 7.4.20. AFG (NID = 01h): DMic ....................................................................................................76 7.4.21. AFG (NID = 01h): DACMode ...........................................................................................77 7.4.22. AFG (NID = 01h): ADCMode ...........................................................................................78 7.4.23. AFG (NID = 01h): PortUse ...............................................................................................79 7.4.24. AFG (NID = 01h): ComJack .............................................................................................80 7.4.25. AFG (NID = 01h): VSPwrState .........................................................................................81 7.4.26. AFG (NID = 01h): AnaPort ...............................................................................................82 7.4.27. AFG (NID = 01h): AnaBTL ...............................................................................................83 7.4.28. AFG (NID = 01h): AnaBTLStatus .....................................................................................85 7.4.29. AFG (NID = 01h): AnaCapless .........................................................................................85 7.4.30. AFG (NID = 01h): Reset ...................................................................................................88 7.4.31. AFG (NID = 01h): DAC3OutAmp (Mono Out Volume) .....................................................89 7.4.32. AFG (NID = 01h): AnaBeep .............................................................................................90 7.4.33. AFG (NID = 01h): EAPD ..................................................................................................91 7.4.34. AFG (NID = 01h): ComboJackTime (Available only on WB revision and beyond) ..........94 7.5. PortA (NID = 0Ah): WCap ................................................................................................................96 7.5.1. PortA (NID = 0Ah): PinCap ................................................................................................97 7.5.2. PortA (NID = 0Ah): ConLst .................................................................................................98 7.5.3. PortA (NID = 0Ah): ConLstEntry0 ......................................................................................99 7.5.4. PortA (NID = 0Ah): InAmpLeft ............................................................................................99 7.5.5. PortA (NID = 0Ah): InAmpRight .......................................................................................100 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 4 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.5.6. PortA (NID = 0Ah): ConSelectCtrl ....................................................................................100 7.5.7. PortA (NID = 0Ah): PwrState ...........................................................................................101 7.5.8. PortA (NID = 0Ah): PinWCntrl ..........................................................................................101 7.5.9. PortA (NID = 0Ah): UnsolResp ........................................................................................102 7.5.10. PortA (NID = 0Ah): ChSense .........................................................................................103 7.5.11. PortA (NID = 0Ah): EAPDBTLLR ...................................................................................103 7.5.12. PortA (NID = 0Ah): ConfigDefault ..................................................................................104 7.6. PortB (NID = 0Bh): WCap ..............................................................................................................106 7.6.1. PortB (NID = 0Bh): PinCap ..............................................................................................108 7.6.2. PortB (NID = 0Bh): ConLst ...............................................................................................109 7.6.3. PortB (NID = 0Bh): ConLstEntry0 ....................................................................................110 7.6.4. PortB (NID = 0Bh): ConSelectCtrl ....................................................................................110 7.6.5. PortB (NID = 0Bh): PwrState ...........................................................................................110 7.6.6. PortB (NID = 0Bh): PinWCntrl ..........................................................................................111 7.6.7. PortB (NID = 0Bh): UnsolResp ........................................................................................112 7.6.8. PortB (NID = 0Bh): ChSense ...........................................................................................112 7.6.9. PortB (NID = 0Bh): EAPDBTLLR .....................................................................................113 7.6.10. PortB (NID = 0Bh): ConfigDefault ..................................................................................113 7.7. PortC (NID = 0Ch): WCap .............................................................................................................116 7.7.1. PortC (NID = 0Ch): PinCap ..............................................................................................117 7.7.2. PortC (NID = 0Ch): ConLst ..............................................................................................118 7.7.3. PortC (NID = 0Ch): ConLstEntry0 ....................................................................................119 7.7.4. PortC (NID = 0Ch): InAmpLeft .........................................................................................119 7.7.5. PortC (NID = 0Ch): InAmpRight .......................................................................................120 7.7.6. PortC (NID = 0Ch): ConSelectCtrl ...................................................................................120 7.7.7. PortC (NID = 0Ch): PwrState ...........................................................................................121 7.7.8. PortC (NID = 0Ch): PinWCntrl .........................................................................................121 7.7.9. PortC (NID = 0Ch): UnsolResp ........................................................................................122 7.7.10. PortC (NID = 0Ch): ChSense .........................................................................................123 7.7.11. PortC (NID = 0Ch): EAPDBTLLR ...................................................................................123 7.7.12. PortC (NID = 0Ch): ConfigDefault ..................................................................................124 7.8. PortD (NID = 0Dh): WCap .............................................................................................................127 7.8.1. PortD (NID = 0Dh): PinCap ..............................................................................................128 7.8.2. PortD (NID = 0Dh): ConLst ..............................................................................................129 7.8.3. PortD (NID = 0Dh): ConLstEntry0 ....................................................................................130 7.8.4. PortD (NID = 0Dh): ConSelectCtrl ...................................................................................130 7.8.5. PortD (NID = 0Dh): PwrState ...........................................................................................131 7.8.6. PortD (NID = 0Dh): PinWCntrl .........................................................................................132 7.8.7. PortD (NID = 0Dh): EAPDBTLLR .....................................................................................132 7.8.8. PortD (NID = 0Dh): ConfigDefault ....................................................................................132 7.9. PortE (NID = 0Eh): WCap ..............................................................................................................136 7.9.1. PortE (NID = 0Eh): PinCap ..............................................................................................137 7.9.2. PortE (NID = 0Eh): ConLst ...............................................................................................138 7.9.3. PortE (NID = 0Eh): ConLstEntry0 ....................................................................................139 7.9.4. PortE (NID = 0Eh): InAmpLeft ..........................................................................................139 7.9.5. PortE (NID = 0Eh): InAmpRight .......................................................................................140 7.9.6. PortE (NID = 0Eh): ConSelectCtrl ....................................................................................140 7.9.7. PortE (NID = 0Eh): PwrState ...........................................................................................141 7.9.8. PortE (NID = 0Eh): PinWCntrl ..........................................................................................141 7.9.9. PortE (NID = 0Eh): UnsolResp ........................................................................................142 7.9.10. PortE (NID = 0Eh): ChSense .........................................................................................142 7.9.11. PortE (NID = 0Eh): EAPDBTLLR ...................................................................................143 7.9.12. PortE (NID = 0Eh): ConfigDefault ..................................................................................143 7.10. PortF (NID = 0Fh): WCap ............................................................................................................146 7.10.1. PortF (NID = 0Fh): PinCap .............................................................................................147 7.10.2. PortF (NID = 0Fh): ConLst .............................................................................................148 7.10.3. PortF (NID = 0Fh): ConLstEntry0 ...................................................................................149 7.10.4. PortF (NID = 0Fh): InAmpLeft ........................................................................................149 7.10.5. PortF (NID = 0Fh): InAmpRight ......................................................................................150 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 5 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.10.6. PortF (NID = 0Fh): ConSelectCtrl ..................................................................................150 7.10.7. PortF (NID = 0Fh): PwrState ..........................................................................................151 7.10.8. PortF (NID = 0Fh): PinWCntrl ........................................................................................151 7.10.9. PortF (NID = 0Fh): UnsolResp .......................................................................................152 7.10.10. PortF (NID = 0Fh): ChSense ........................................................................................153 7.10.11. PortF (NID = 0Fh): EAPDBTLLR .................................................................................153 7.10.12. PortF (NID = 0Fh): ConfigDefault .................................................................................154 7.11. MonoOut (NID = 10h): WCap ......................................................................................................157 7.11.1. MonoOut (NID = 10h): PinCap .......................................................................................158 7.11.2. MonoOut (NID = 10h): ConLst .......................................................................................159 7.11.3. MonoOut (NID = 10h): ConLstEntry0 .............................................................................160 7.11.4. MonoOut (NID = 10h): PwrState ....................................................................................160 7.11.5. MonoOut (NID = 10h): PinWCntrl ..................................................................................161 7.11.6. MonoOut (NID = 10h): ConfigDefault .............................................................................162 7.12. DMic0 (NID = 11h): WCap ...........................................................................................................165 7.12.1. DMic0 (NID = 11h): PinCap ...........................................................................................166 7.12.2. DMic0 (NID = 11h): InAmpLeft .......................................................................................167 7.12.3. DMic0 (NID = 11h): InAmpRight ....................................................................................168 7.12.4. DMic0 (NID = 11h): PwrState .........................................................................................168 7.12.5. DMic0 (NID = 11h): PinWCntrl .......................................................................................169 7.12.6. DMic0 (NID = 11h): UnsolResp ......................................................................................170 7.12.7. DMic0 (NID = 11h): ChSense ........................................................................................170 7.12.8. DMic0 (NID = 11h): ConfigDefault .................................................................................171 7.13. DMic1Vol (NID = 12h): WCap ......................................................................................................174 7.13.1. DMic1Vol (NID = 12h): ConLst .......................................................................................175 7.13.2. DMic1Vol (NID = 12h): ConLstEntry0 ............................................................................176 7.13.3. DMic1Vol (NID = 12h): InAmpLeft ..................................................................................176 7.13.4. DMic1Vol (NID = 12h): InAmpRight ...............................................................................176 7.13.5. DMic1Vol (NID = 12h): PwrState ...................................................................................177 7.14. DAC0 (NID = 13h): WCap ............................................................................................................178 7.14.1. DAC0 (NID = 13h): Cnvtr ...............................................................................................179 7.14.2. DAC0 (NID = 13h): OutAmpLeft .....................................................................................180 7.14.3. DAC0 (NID = 13h): OutAmpRight ..................................................................................181 7.14.4. DAC0 (NID = 13h): PwrState .........................................................................................181 7.14.5. DAC0 (NID = 13h): CnvtrID ............................................................................................182 7.14.6. DAC0 (NID = 13h): EAPDBTLLR ...................................................................................183 7.15. DAC1 (NID = 14h): WCap ............................................................................................................183 7.15.1. DAC1 (NID = 14h): Cnvtr ...............................................................................................185 7.15.2. DAC1 (NID = 14h): OutAmpLeft .....................................................................................186 7.15.3. DAC1 (NID = 14h): OutAmpRight ..................................................................................186 7.15.4. DAC1 (NID = 14h): PwrState .........................................................................................187 7.15.5. DAC1 (NID = 14h): CnvtrID ............................................................................................188 7.15.6. DAC1 (NID = 14h): EAPDBTLLR ...................................................................................188 7.16. ADC0 (NID = 15h): WCap ............................................................................................................189 7.16.1. ADC0 (NID = 15h): ConLst ............................................................................................190 7.16.2. ADC0 (NID = 15h): ConLstEntry0 ..................................................................................191 7.16.3. ADC0 (NID = 15h): Cnvtr ...............................................................................................191 7.16.4. ADC0 (NID = 15h): ProcState ........................................................................................192 7.16.5. ADC0 (NID = 15h): PwrState .........................................................................................193 7.16.6. ADC0 (NID = 15h): CnvtrID ............................................................................................194 7.17. ADC1 (NID = 1Bh): WCap ...........................................................................................................194 7.17.1. ADC1 (NID = 1Bh): ConLst ............................................................................................196 7.17.2. ADC1 (NID = 1Bh): ConLstEntry0 ..................................................................................196 7.17.3. ADC1 (NID = 1Bh): Cnvtr ...............................................................................................197 7.17.4. ADC1 (NID = 1Bh): ProcState ........................................................................................198 7.17.5. ADC1 (NID = 1Bh): PwrState .........................................................................................199 7.17.6. ADC1 (NID = 1Bh): CnvtrID ...........................................................................................200 7.18. ADC0Mux (NID = 17h): WCap .....................................................................................................201 7.18.1. ADC0Mux (NID = 17h): ConLst ......................................................................................202 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 6 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.18.2. ADC0Mux (NID = 17h): ConLstEntry4 ...........................................................................203 7.18.3. ADC0Mux (NID = 17h): ConLstEntry0 ...........................................................................203 7.18.4. ADC0Mux (NID = 17h): OutAmpCap .............................................................................204 7.18.5. ADC0Mux (NID = 17h): OutAmpLeft ..............................................................................205 7.18.6. ADC0Mux (NID = 17h): OutAmpRight ...........................................................................205 7.18.7. ADC0Mux (NID = 17h): ConSelectCtrl ...........................................................................206 7.18.8. ADC0Mux (NID = 17h): PwrState ..................................................................................206 7.18.9. ADC0Mux (NID = 17h): EAPDBTLLR ............................................................................207 7.19. ADC1Mux (NID = 18h): WCap .....................................................................................................208 7.19.1. ADC1Mux (NID = 18h): ConLst ......................................................................................210 7.19.2. ADC1Mux (NID = 18h): ConLstEntry4 ...........................................................................210 7.19.3. ADC1Mux (NID = 18h): ConLstEntry0 ...........................................................................211 7.19.4. ADC1Mux (NID = 18h): OutAmpCap .............................................................................211 7.19.5. ADC1Mux (NID = 18h): OutAmpLeft ..............................................................................212 7.19.6. ADC1Mux (NID = 18h): OutAmpRight ...........................................................................212 7.19.7. ADC1Mux (NID = 18h): ConSelectCtrl ...........................................................................213 7.19.8. ADC1Mux (NID = 18h): PwrState ..................................................................................213 7.19.9. ADC1Mux (NID = 18h): EAPDBTLLR ............................................................................214 7.20. MonoMux (NID = 19h): WCap .....................................................................................................215 7.20.1. MonoMux (NID = 19h): ConLst ......................................................................................216 7.20.2. MonoMux (NID = 19h): ConLstEntry0 ............................................................................217 7.20.3. MonoMux (NID = 19h): ConSelectCtrl ...........................................................................217 7.20.4. MonoMux (NID = 19h): PwrState ...................................................................................217 7.21. MonoMix (NID = 1Ah): WCap ......................................................................................................218 7.21.1. MonoMix (NID = 1Ah): ConLst .......................................................................................220 7.21.2. MonoMix (NID = 1Ah): ConLstEntry0 .............................................................................220 7.21.3. MonoMix (NID = 1Ah): PwrState ....................................................................................221 7.22. Mixer (NID = 1Bh): WCap ............................................................................................................223 7.22.1. Mixer (NID = 1Bh): InAmpCap .......................................................................................224 7.22.2. Mixer (NID = 1Bh): ConLst .............................................................................................225 7.22.3. Mixer (NID = 1Bh): ConLstEntry4 ..................................................................................225 7.22.4. Mixer (NID = 1Bh): ConLstEntry0 ..................................................................................226 7.22.5. Mixer (NID = 1Bh): InAmpLeft0 ......................................................................................226 7.22.6. Mixer (NID = 1Bh): InAmpRight0 ...................................................................................227 7.22.7. Mixer (NID = 1Bh): InAmpLeft1 ......................................................................................227 7.22.8. Mixer (NID = 1Bh): InAmpRight1 ...................................................................................228 7.22.9. Mixer (NID = 1Bh): InAmpLeft2 ......................................................................................228 7.22.10. Mixer (NID = 1Bh): InAmpRight2 .................................................................................229 7.22.11. Mixer (NID = 1Bh): InAmpLeft3 ....................................................................................229 7.22.12. Mixer (NID = 1Bh): InAmpRight3 .................................................................................230 7.22.13. Mixer (NID = 1Bh): InAmpLeft4 ....................................................................................230 7.22.14. Mixer (NID = 1Bh): InAmpRight4 .................................................................................231 7.22.15. Mixer (NID = 1Bh): InAmpLeft5 ....................................................................................231 7.22.16. Mixer (NID = 1Bh): InAmpRight5 .................................................................................232 7.22.17. Mixer (NID = 1Bh): PwrState ........................................................................................232 7.23. MixerOutVol (NID = 1Ch): WCap .................................................................................................233 7.23.1. MixerOutVol (NID = 1Ch): ConLst ..................................................................................235 7.23.2. MixerOutVol (NID = 1Ch): ConLstEntry0 .......................................................................235 7.23.3. MixerOutVol (NID = 1Ch): OutAmpCap .........................................................................236 7.23.4. MixerOutVol (NID = 1Ch): OutAmpLeft ..........................................................................237 7.23.5. MixerOutVol (NID = 1Ch): OutAmpRight .......................................................................237 7.23.6. MixerOutVol (NID = 1Ch): PwrState ..............................................................................238 7.24. SPDIFOut0 (NID = 1Dh): WCap ..................................................................................................239 7.24.1. SPDIFOut0 (NID = 1Dh): PCMCap ................................................................................240 7.24.2. SPDIFOut0 (NID = 1Dh): StreamCap ............................................................................242 7.24.3. SPDIFOut0 (NID = 1Dh): OutAmpCap ...........................................................................242 7.24.4. SPDIFOut0 (NID = 1Dh): Cnvtr ......................................................................................243 7.24.5. SPDIFOut0 (NID = 1Dh): OutAmpLeft ...........................................................................244 7.24.6. SPDIFOut0 (NID = 1Dh): OutAmpRight .........................................................................245 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 7 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.24.7. SPDIFOut0 (NID = 1Dh): PwrState ................................................................................245 7.24.8. SPDIFOut0 (NID = 1Dh): CnvtrID ..................................................................................246 7.24.9. SPDIFOut0 (NID = 1Dh): DigCnvtr ................................................................................247 7.25. SPDIFOut1 (NID = 1Eh): WCap ..................................................................................................248 7.25.1. SPDIFOut1 (NID = 1Eh): PCMCap ................................................................................249 7.25.2. SPDIFOut1 (NID = 1Eh): StreamCap ............................................................................251 7.25.3. SPDIFOut1 (NID = 1Eh): OutAmpCap ...........................................................................251 7.25.4. SPDIFOut1 (NID = 1Eh): Cnvtr ......................................................................................252 7.25.5. SPDIFOut1 (NID = 1Eh): OutAmpLeft ...........................................................................253 7.25.6. SPDIFOut1 (NID = 1Eh): OutAmpRight .........................................................................254 7.25.7. SPDIFOut1 (NID = 1Eh): PwrState ................................................................................254 7.25.8. SPDIFOut1 (NID = 1Eh): CnvtrID ..................................................................................255 7.25.9. SPDIFOut1 (NID = 1Eh): DigCnvtr .................................................................................256 7.26. Dig0Pin (NID = 1Fh): WCap ........................................................................................................257 7.26.1. Dig0Pin (NID = 1Fh): PinCap .........................................................................................258 7.26.2. Dig0Pin (NID = 1Fh): ConLst .........................................................................................259 7.26.3. Dig0Pin (NID = 1Fh): ConLstEntry0 ...............................................................................260 7.26.4. Dig0Pin (NID = 1Fh): PwrState ......................................................................................260 7.26.5. Dig0Pin (NID = 1Fh): PinWCntrl ....................................................................................261 7.26.6. Dig0Pin (NID = 1Fh): UnsolResp ..................................................................................262 7.26.7. Dig0Pin (NID = 1Fh): ChSense ......................................................................................262 7.26.8. Dig0Pin (NID = 1Fh): ConfigDefault ...............................................................................263 7.27. Dig1Pin (NID = 20h): WCap .........................................................................................................265 7.27.1. Dig1Pin (NID = 20h): PinCap .........................................................................................267 7.27.2. Dig1Pin (NID = 20h): ConLst .........................................................................................268 7.27.3. Dig1Pin (NID = 20h): ConLstEntry0 ...............................................................................269 7.27.4. Dig1Pin (NID = 20h): PwrState ......................................................................................269 7.27.5. Dig1Pin (NID = 20h): PinWCntrl .....................................................................................270 7.27.6. Dig1Pin (NID = 20h): ConfigDefault ...............................................................................271 7.28. DigBeep (NID = 21h): WCap .......................................................................................................274 7.28.1. DigBeep (NID = 21h): OutAmpCap ................................................................................275 7.28.2. DigBeep (NID = 21h): OutAmpLeft ................................................................................275 7.28.3. DigBeep (NID = 21h): PwrState .....................................................................................276 7.28.4. DigBeep (NID = 21h): Gen .............................................................................................277 7.28.5. DigBeep (NID = 21h): Gain ............................................................................................277 7.29. AdvancedFunctions (NID = 22h): WCap ......................................................................................278 7.29.1. AdvancedFunctions (NID = 22h): Cntrl0 ........................................................................279 8. PINOUT AND PACKAGING .................................................................................................. 295 8.0.1. 48QFN Pin Table .............................................................................................................299 8.0.2. 48QFN Package Outline and Package Dimensions ........................................................298 8.1. Standard Reflow Profile Data ........................................................................................................299 9. DISCLAIMER ......................................................................................................................... 300 10. DOCUMENT REVISION HISTORY ..................................................................................... 301 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 8 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO LIST OF TABLES Table 1. Port Functionality .............................................................................................................................12 Table 2. Analog Output Port Behavior ...........................................................................................................13 Table 3. 48pin Jack Detect ............................................................................................................................15 Table 4. SPDIF OUT 0 Behavior ....................................................................................................................16 Table 5. SPDIF OUT 1 Behavior ....................................................................................................................16 Table 6. Power Management .........................................................................................................................19 Table 7. Example channel mapping ...............................................................................................................22 Table 9. EAPD Pin Mode Select ....................................................................................................................24 Table 10. Control bit descriptions for BTL amplifier and Headphone amplifier enable configurations ...........24 Table 11. BTL Amp Enable Configuration ......................................................................................................24 Table 14. EAPD Analog PC_Beep behavior ..................................................................................................25 Table 15. EAPD Behavior ..............................................................................................................................25 Table 12. Headphone Amp Enable Configuration ..........................................................................................25 Table 13. Port E Headphone Amp Enable Configuration support by part and mode .....................................25 Table 16. Valid Digital Mic Configurations .....................................................................................................28 Table 17. DMIC_CLK and DMIC_0,1 Operation During Power States ..........................................................28 Table 18. Electrical Specification: Maximum Ratings ...................................................................................45 Table 19. Recommended Operating Conditions ............................................................................................45 Table 20. 92HD91 Analog Performance Characteristics ...............................................................................46 Table 21. Class-D BTL Amplifier Performance ..............................................................................................50 Table 22. Capless Headphone Supply ..........................................................................................................51 Table 23. HD Audio Bus Timing .....................................................................................................................51 Table 24. SPDIF Timing .................................................................................................................................52 Table 25. Digital Mic timing ............................................................................................................................52 Table 26. GPIO Characteristics .....................................................................................................................52 Table 27. Pin Configuration Default Settings .................................................................................................56 Table 28. Command Format for Verb with 4-bit Identifier ..............................................................................57 Table 29. Command Format for Verb with 12-bit Identifier ............................................................................57 Table 30. Solicited Response Format ............................................................................................................57 Table 31. Unsolicited Response Format ........................................................................................................57 Table 32. Widget List .....................................................................................................................................58 Table 33. 48QFN Pin Description ................................................................................................................296 Table 34. Standard Reflow Profile ...............................................................................................................299 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 9 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO LIST OF FIGURES Figure 1. Multi-channel capture ......................................................................................................................22 Figure 2. Multi-channel timing diagram ..........................................................................................................22 Figure 3. HP EAPD Example to be replaced by single pin for internal amp ..................................................26 Figure 4. EAPD implementation .....................................................................................................................27 Figure 5. Single Digital Microphone (data is ported to both left and right channels .......................................29 Figure 6. Stereo Digital Microphone Configuration ........................................................................................30 Figure 7. Quad Digital Microphone Configuration ..........................................................................................31 Figure 8. Analog PC Beep Active ..................................................................................................................32 Figure 9. Analog PC Beep Flow chart ............................................................................................................33 Figure 10. Combo Jack ..................................................................................................................................35 Figure 11. Switching between Normal and Aux Audio Modes .......................................................................39 Figure 12. Aux Audio Playback When Nothing Plugged In (or System is not Docked) ..................................41 Figure 13. Aux Audio Playback When System Headphones are Plugged In .................................................42 Figure 14. Aux Audio Playback when the System is Docked and Headphones are Plugged In ....................42 Figure 15. Aux Audio Record when Nothing is Plugged In (or The System is not Docked) ...........................42 Figure 16. Aux Audio Record when the System is Docked with the System Microphone Plugged In ...........43 Figure 17. Aux Audio Record when the System is Docked with the Dock Microphone Plugged In ...............43 Figure 18. HD Audio Bus Timing ....................................................................................................................51 Figure 19. Functional Block Diagram .............................................................................................................53 Figure 20. Widget Diagram ............................................................................................................................54 Figure 21. Port Configurations .......................................................................................................................55 Figure 22. 48QFN Pin Assignment ..............................................................................................................295 Figure 23. 48QFN Package Diagram ...........................................................................................................298 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 10 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 1. DESCRIPTION 1.1. Overview The 92HD91 audio CODEC provides stereo 24- bit, full duplex resolution supporting sample rates up to 192kHz by the DAC and ADC. SPDIF outputs support sample rates of 192kHz, 96kHz, 88.2kHz, 48kHz, and 44.1kHz. Additional sample rates are supported by the driver software. An integrated BTL stereo amplifier is ideal for driving 4ohm or 8ohm integrated speakers in mobile and ultra-mobile computers. For desktop computers or mobile computers using only one speaker, the BTL output stage may be configured to support a single mono speaker. The 92HD91 audio CODEC supports a wide range of desktop and laptop configurations. The 2 independent SPDIF output interfaces provide connectivity to consumer electronic equipment or to a home entertainment system. Simultaneous HDMI and SPDIF output is possible. All inputs can be programmed with 0-30 dB gain in 10 dB steps allowing for line or microphone use of any input. Port presence detect capabilities allow the CODEC to detect when audio devices are connected to the CODEC. The fully parametric Internal EQ can be initiated upon headphone jack insertion and removal for protection of notebook speakers. The 92HD91 audio CODEC operates with a 3.3V digital supply and a 5V (4.75V allowed when using external voltage regulator) analog supply. It allows for 1.5V and 3.3V HDA signaling; the correct signalling level is selected dynamically based on the power supply voltage on the DVDD-IO pin. The 92HD91 audio CODEC is offered in a 48-pin QFN Environmental (ROHS) package. 1.2. Orderable Part Numbers 92HD91B1X5NLGXyyX 92HD91B2X5NLGXyyX 92HD91B1X5NLGIyyX 92HD91B2X5NLGIyyX Aux mode No Aux mode Aux mode Industrial Temp No Aux mode Industrial Temp yy = silicon stepping/revision, contact sales for current data. Add an "8" to the end for tape and reel delivery. Please note that Industrial Temp is only available on revision WC and forward. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 11 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2. DETAILED DESCRIPTION 2.1. Port Functionality Multi-function (Input/Output) ports allow for the highest possible flexibility. 7 bi-directional ports, 2 are headphone capable, support a wide variety of consumer desktop and mobile system use models. Pins 48-QFN * Port A supports * Headphone Out * Line Out * Line Input * Mic with 0/10/20/30 dB Boost * Port B supports * Capless Headphone Out * Capless Line Out * Port C * Line In * Line Out * Mic with 0/10/20/30 dB Boost * Port D supports * BTL stereo output * BTL (L+/L-) mono out * Port E supports * Line In * Line Out * Mic with 0/10/20/30 dB Boost * Port F supports * Line In * Line Out * Mic with 0/10/20/30 dB Boost * Mono Out supports * Line Out Port Input 28/29 A Yes 31/32 B Yes Output Headphone Yes Yes Yes Yes BTL Yes Mic Bias (Vref pin) Input boost amp Yes Yes Yes Yes 19/20 C 40/41/43/44 D 15/16 E Yes Yes Yes 17/18 F Yes Yes Yes Yes 25 Mono Out Yes 48 SPDIF_OUT0 Yes 46 DMIC1/SPDIFOUT1/ Yes 4 (CLK=2) DMIC0 Yes Yes Yes Yes Yes Table 1. Port Functionality TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 12 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.1.1. Port Characteristics Universal (Bi-directional) jacks are supported on ports A,C, E, and F. Ports A and B are designed to drive 32 ohm (nominal) headphones or a 10K (nominal) load. Line Level outputs are intended to drive an external 10K load (nominal) and an on board shunt resistor of 20-47K (nominal). However, applications may support load impedances of 5K ohms and above. Input ports are 50K (nominal) at the pin. DAC full scale outputs and intended full scale input levels are 1V rms at 5V. Line output ports and Headphone output ports on the 92HD93 codec may be configured for +3dBV full scale output levels by using a vendor specific verb. Output ports are always on to prevent pops/clicks associated with charging and discharging output coupling capacitors. This maintains proper bias on output coupling caps even in power state D3 as long as AVDD is available. Unused ports should be left unconnected. When updating existing designs to use the 92HD93 codec, ensure that there are no conflicts between the output ports on the 92HD93 codec and existing circuitry. AFG Power State Input Output Used as output Enable Enable for DAC/Mixer D3cold Used as input for ADC, mixer Port Behavior Yes Not allowed. Port is active as input. No Not allowed. Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. 1 1 Don't care Don't care 1 0 NA NA Yes Active - Port enabled as input 1 0 NA NA No Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. 0 1 D0-D2 D3 Used as output for analog PC_Beep currently used by DAC, mixer, beep, or is traditional line or headphone output Active - Port enabled as output NA not currently used by DAC, mixer, beep and is capless HP/BTL port 0 1 0 0 NA NA NA Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. 1 1 NA NA Don't care Not allowed. Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. 1 0 NA NA Don't care Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. 0 1 currently used by DAC, mixer, beep, or is traditional line or headphone output Don't care Low power state. If enabled, Beep will output from the port 0 1 not currently used by DAC, mixer, beep and is capless HP/BTL port Don't care Inactive (Power Down) 0 0 Don't care Inactive (Power Down) - Port keeps output coupling caps charged if port uses caps. - - NA NA Inactive (Power Down) Inactive (lower power) - Port keeps output coupling caps charged if port uses caps. Table 2. Analog Output Port Behavior TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 13 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO AFG Power State Input Output Used as output Enable Enable for DAC/Mixer Used as output for analog PC_Beep Used as input for ADC, mixer Port Behavior D4 - - Inactive (lower power) - Port keeps output coupling caps charged if port uses caps. D5 - - Off - Charge on coupling caps (if used) will not be maintained. Table 2. Analog Output Port Behavior TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 14 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.1.2. Vref_Out Ports C, & A support Vref_Out pins for biasing electret cartridge microphones. Settings of 80% AVDD, 50% AVDD, GND, and Hi-Z are supported. Attempting to program a pin widget control with a reserved or unsupported value will cause the associated Vref_Out pin to assume a Hi-Z state and the pin widget control Vref_En field will return a value of `000' (Hi-Z) when read. 2.1.3. Jack Detect Plugs inserted to a jack on Ports A, B, C & SPDIFOUT0 are detected using SENSE_A. Plugs inserted to a jack on Ports E,F, DMIC0, & SPDIFOUT1 are detected using SENSE_B. Per HDA015-B, the detection circuit operates when the CODEC is in D0 - D3 and can also operate if both the CODEC and Controller are in D3 (no bus clock.) Jack detection requires that all supplies (analog and digital) are active and stable. When AVDD is not present, the value reported in the pin widget is invalid. When the HD Audio bus is in a low power state (reset asserted and clock stopped) the CODEC will generate a Power State Change Request when a change in port connectivity is sensed and then generate an unsolicited response after the HD Audio link has been brought out of a low power state and the device has been enumerated. Per HDA015-B, this will take less than 10mS. The following table summarizes the proper resistor tolerances for different analog supply voltages.. AVdd Nominal Voltage (+/- 5%) Resistor Tolerance Pull-Up Resistor Tolerance SENSE_A/B 4.75V 1% 1% Resistor SENSE_A SENSE_B 39.2K PORT A (HP0) PORT E 20.0K PORT B (HP1) PORT F 10.0K PORT C DMIC0 5.11K SPDIFOUT0 SPDIFOUT1 (DMIC1) 2.49K Pull-up to AVDD Pull-up to AVDD Table 3. 48pin Jack Detect See reference design for more information on Jack Detect implementation. 2.1.4. SPDIF Output Both SPDIF Outputs can operate at 44.1kHz, 48kHz, 88.2kHz, 96kHz and 192KHz as defined in the Intel High Definition Audio Specification with resolutions up to 24 bits. This insures compatibility with all consumer audio gear and allows for convenient integration into home theater systems and media center PCs. The two SPDIF output converters can not be aligned in phase with the DACs. Even when attached to the same stream, the two SPDIF output converters may be misaligned with respect to their frame boundaries. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 15 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Per the HDA015-B , the SPDIF outputs support the ability to provide clocking information even when no stream is selected for the converter, or when in a low power state. Also, the SPDIF output ports support port presence detect. SPDIF Outputs are outlined in tables below. AFG Power State D0-D3 D0 D1-D2 Output Enable RESET# Stream ID Keep Alive Enab le Pin Behavior Asserted (Low) - - - - Hi-Z (internal pull-down enabled) immediately after power on, otherwise the previous state is retained. De-Asserted (High) Disabled - - - Hi-Z (internal pull-down enabled) De-Asserted (High) Enabled Disabled - - Active - Pin drives 0 (internal pull-down NA) De-Asserted (High) Enabled Enabled 0 - Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) De-Asserted (High) Enabled Enabled 1-15 - Active - Pin drives SPDIFOut0 data (internal pull-down NA) De-Asserted (High) Disabled - - - Hi-Z (internal pull-down enabled) - - 0 Active - Pin drives 0 (internal pull-down NA) De-Asserted (High) Enabled Enabled - 1 Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) - - 0 Hi-Z (internal pull-down enabled) Disabled - - 1 Hi-Z (internal pull-down enabled) Enabled Enabled - 1 Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) D3 Converter Dig Enable De-Asserted (High) D3cold - - - - - Hi-Z (internal pull-down enabled) D4 - - - - - Hi-Z (port off) D5 - - - - - Hi-Z (port off) Table 4. SPDIF OUT 0 Behavior AFG Power State GPIO0 Enable RESET# Input Enable Output Enable Convert er Dig En Keep Alive En Strea m ID Pin Behavior D0-D3 Asserted (Low) - - - - - - Hi-Z (internal pull-down enabled) immediately after power on, otherwise the previous state is retained. D0-D3 De-Asserted (High) Enabled - - - - - Active - Pin reflects GPIO0 configuration (internal pull-down enabled) D0-D3 De-Asserted (High) Disabled Enabled Disabled - - - Pin functions as digital mic input (internal pull-down enabled) Table 5. SPDIF OUT 1 Behavior TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 16 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO AFG Power State GPIO0 Enable RESET# Input Enable Output Enable Convert er Dig En Disabled Disabled - De-Asserted (High) D0 Disabled - Keep Alive En Strea m ID - - Hi-Z (internal pull-down enabled) Disabled - - Active - Pin drives 0 (internal pull-down NA) 0 - Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) 1-15 - Active - Pin drives SPDIFOut1 data (internal pull-down NA) - - Hi-Z (internal pull-down enabled) Disabled - - Active - Pin drives 0 (internal pull-down NA) - 0 Active - Pin drives 0 (internal pull-down NA) - 1 Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) - - Hi-Z (internal pull-down enabled) Disabled - - Hi-Z (internal pull-down enabled) - 0 Hi-Z (internal pull-down enabled) - 1 Active - Pin drives SPDIF-format, but data is zeroes (internal pull-down NA) Enabled Enabled Disabled - D1-D2 De-Asserted (High) Disabled Disabled Enabled Enabled Disabled De-Asserted (High) D3 Disabled Disabled Enabled Pin Behavior Enabled D3cold - Disabled Disabled - - - - Hi-Z (internal pull-down enabled) D4 - - - - - - - Hi-Z (port off) D5 - - - - - - - Hi-Z (port off) Table 5. SPDIF OUT 1 Behavior 2.2. Mono Output The Mono Out port source selection, power state, and mute characteristics are all independently controlled by the mono output port controls. EQ does not apply to this path. An internal 2nd order band-pass filter is provided to restrict the output frequencies when using mono out to drive an external amplified sub-woofer. The following sources are available for the Mono Out pin: * DAC0 Output: When selected (by using the port connection list), the DAC0 left and right outputs are summed together. * DAC1 Output: When selected (by using the port connection list), the DAC1 left and right outputs are summed together. * Mixer Output: When selected (by using the port connection list), the mixer left and right outputs are summed together. The stereo inputs are scaled by -6dB and then summed to provide an output that is the average of the two inputs. The full scale output at mono out is designed to be about 0dBV. It is not possible to adjust to a +3dBV output level. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 17 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.3. Mono output Band-Pass Filter For many applications, the primary speakers are incapable of reproducing low frequency audio. Therefore it is desirable to implement a woofer or sub-woofer speaker. The mono output is ideal for this task. However, the frequency response should be restricted to prevent interference with the primary speakers. Typically an external filter, known as a cross-over filter, is used. The mono processing path includes a band-pass filter with programmable high and low cut-off frequencies to eliminate the need for an external filter. 2.3.1. Filter Description The band-pass filter is derived from the common biquadratic filter and provides a 12dB/octave roll-off. The filter may be programmed for a -3dB lower band edge of: 63Hz, 80Hz, 100Hz, 120Hz, 150Hz, 200Hz, 315Hz, or 400Hz. The filter may be programmed for a -3dB upper band edge of: 150Hz, 200Hz, 250Hz, 315Hz, 400Hz, 500Hz, 630Hz, or 800Hz. The band-pass filter is enabled by default with a cut-off frequencies at 120Hz and 250Hz. The filter may be bypassed using the associated verb (processing state verb). The Analog PC_Beep input is not affected by the band-pass filter. 2.4. Mixer The mixer supports independent gain (-34.5 to +12dB in 1.5dB steps) on each input as well as independent mutes on each input. The following inputs are available: 2.5. * Port A * Port C * Port E * Port F * DAC 0 * DAC 1 ADC Multiplexers The codec implements 2 ADC input multiplexers. These multiplexers incorporate the ADC record gain function :(-16 to +30dB gain in 1dB steps) as an output amp and allow a preselection of one of below possible inputs: * Port A * Port C * Port E * Port F * Mixer Output * DMIC 0 * DMIC 1 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 18 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.6. Power Management The HD Audio specification defines power states, power state widgets, and power state verbs. Power management is implemented at several levels. The Audio Function Group (AFG) , all converter widgets, and all pin complexes support the power state verb F05/705. Converter widgets are active in D0 and inactive in D1-D3. The following table describes what functionality is active in each power state. Vendor Specific D4 Vendor SpecificD5 Function D0 D11 D2 D3 SPDIF Outputs On On On (idle) On (idle)5 Off Off Off Digital Microphone inputs On Off Off Off Off Off Off D3cold DAC On Off Off Off Off Off Off D2S On Off Off Off Off Off Off ADC On Off Off Off Off Off Off ADC Volume Control On Off Off Off Off Off Off Ref ADC On Off Off Off Off Off Off Analog Clocks On Off Off Off Off Off Off GPIO pins On On On On5 On On Off VrefOut Pins On On Off Off Off Off Off Input Boost On On Off Off Off Off Off Analog mixer On On Off Off Off Off Off Mixer Volumes On On Off Off Off Off Off Analog PC_Beep On On On On Off Off Off Digital PC_Beep On On On On5 Off Off Off Lo/HP Amps On On On Low Drive2 Low Drive2 Low Drive2 Off Cap-less HP Amps On On On Low Drive2 Low Drive2 Low Drive2 Off Drive2 BTL Amp On On On Low Off Off Off VAG amp On On On Low Drive3 Low Drive Low Drive Off Port Sense On On On On4 Off Off Off Reference Bias generator On On On On On On Off Reference Bandgap core On On On On On On Off HD Audio-Link On On On On5 Limited Off Off Table 6. Power Management 1. No DAC or ADC streams are active. Analog mixing and loop thru are supported. 2. VAG is kept active when ports are disabled or in D3/D3cold/D4. PC_Beep is supported in D3 but may be attenuated and distorted depending on load impedance. The codec will shut down the capless headphone amplifiers and BTL amplifier in D3 and below. In D3, Hendrix/Kaveri will turn on the BTL and Capless amplifiers if activity is detected on the PC_BEEP input and analog PC_Beep is enabled. 3. VAG is always ramped up and down gradually, except in the case of a sudden power removal. VAG is active in D2/D3 but in a low power state. 4. Both AVDD and DVDD must be available for Port Sense to operate. 5. Not active if BITCLK is not running (Controller in D3), but can signal power state change request (PME) The D3-default state is available for HD Audio compliance. The programmable values, exposed via vendor-specific settings, are under TSI Device Driver control for further power reduction. The analog mixer, line and headphone amps, port presence detect, and internal references may be disabled using vendor specific verbs. Use of these vendor specific verbs will cause pops. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 19 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO The default power state for the Audio Function Group after reset is D3. 2.7. AFG D0 The AFG D0 state is the active state for the device. All functions are active if their power state (if they support power management at their node level) has been set to D0. 2.8. AFG D1 D1 is a lower power mode where all converter widgets are disabled. Analog mixer and port functions are active. The part will resume from theD1 to theD0 state within 1 mS. 2.9. AFG D2 The D2 state further reduces power by disabling the mixer and port functions. The port amplifiers and internal references remain active to keep port coupling caps charged and the system ready for a quick resume to either the D1 or D0 state. The part will resume from the D2 state to the D0 state within 2mS. 2.10. AFG D3 The D3-default state is available for HD Audio compliance. All converters are shut down. Port amplifiers and references are active but in a low power state to prevent pops. Resume times may be longer than those from D2, but still less than 10mS to meet Intel low power goals. The default power state for the Audio Function Group after power is applied is D3. While in AFG D3, the HD Audio controller may be in a D0 state (HD Audio bus active) or in a D3 state (HD Audio bus held in reset with no Bit_Clk, SData_Out, or Sync activity.) The expected behavior is as follows (see the HDA015-B section for more information): Function HDA Bus active Port Presence Detect state change Unsolicited Response GPIO state change Unsolicited Response 2.10.1. HDA Bus stopped Wake Event followed by an unsolicited response Wake Event followed by an unsolicited response AFG D3cold The D3cold power state is the lowest power state available that does not use vendor specific verbs. While in D3cold, the CODEC will still respond to bus requests to revert to a higher power state (double AFG reset, link reset). However, audio processing, port presence detect, and other functions are disabled. Per the HD Audio bus HDA015-B, the D3cold state is intended to be used just prior to removing power to the CODEC. Typically, power will be removed within 200mS. However, the codec may exit from the D3cold state by generating 2, back-to-back, AFG reset events. Resume time from D3cold is less than 200mS. 2.11. Vendor Specific Function Group Power States D4/D5 The codec introduces vendor specific power states. A vendor defined verb is added to the Audio Function Group that combines multiple vendor specific power control bits into logical power states for use by the audio driver. The 2 states defined offer lower power than the 5 existing states defined in the HD Audio specification and HDA015-B. The Vendor Specific D4 state provides lower digital power consumption relative to D3cold by disabling HD Audio link responses. Vendor specific D5 fur- TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 20 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO ther reduces power consumption on the digital supply by turning off GPIO drivers, and reduces analog power consumption by turning off all analog circuitry except for reset circuits. States D4/D5 are not entered until D3cold has been requested so are actually D3cold options rather than true, independent, power states. Software can pre-program the D4 or D5 state as a re-definition of how the part will behave when the D3cold power state is requested or software may enter D3cold, then set the D4 or D5 before performing the power state get command. The preferred method is to request D3cold, then select D4 or D5 as desired.This will reduce the severity of pops encountered when entering D4 or D5. Both power states require a link reset or removal of DVDD to exit. The CODEC may pop when using these verbs and transition times to an active state (D1 or D0 for example) may take several seconds. 2.12. Low-voltage HDA Signaling The codec is compatible with either 1.5V or 3.3V HDA bus signaling; in the 48QFN package the voltage selection is done dynamically based on the input voltage of DVDD_IO. DVDD_IO is currently not a logic configuration pin, but rather provides the digital power supply to be used for the HDA bus signals. When in 1.5V mode, the codec can correctly decode BITCLK, SYNC, RESET# and SDO as they operate at 1.5V; additionally it will drive SDI and SDO at 1.5V. None of the GPIOs are affected, as they always function at their nominal voltage (DVDD or AVDD). 2.13. Multi-channel capture The capability to assign multiple "ADC Converters" to the same stream is supported to meet the microphone array requirements of Vista and future operating systems. Single converter streams are still supported this is done by assigning unique non zero Stream IDs to each converter. All capture devices (ADCs 0 and 1) may be used to create a multi-channel input stream. There are no restrictions regarding digital microphones. The ADC Converters can be associated with a single stream as long the sample rate and the bits per sample are the same. The assignment of converter to channel is done using the "CnvtrID" widget and is restricted to even values. The ADC converters will always put out a stereo sample and therefore require 2 channels per converter. The stream will not be generated unless all entries for the targeted converters are set identically, and the total number of assigned converter channels matches the value in the NmbrChan field. These are listed the "Multi-Converter Stream Critical Entries." table. An example of a 4 Channel Steam with ADC0 supplying channels 0&1 and ADC1 supplying channels 2 & 3 is shown below. A 4 Channel stream can be created by assigning the same non-zero stream id "Strm= N" to both ADC0 and ADC1. The sample rates must be set the same and the number of channels must be set to 4 channels "NmbrChan = 0011". TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 21 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO ADC1 CnvtrID (NID = 0x08) [3:0] ADC0 CnvtrID Ch = 2 (NID = 0x07) [3:0] Ch=0 Table 7. Example channel mapping Figure 1. Multi-channel capture ADC0.CnvrtID.Channel = 0 ADC1.CnvrtID.Channel = 2 ADC0.CnvrtID.Channel = 2 ADC1.CnvrtID.Channel = 0 Stream ID Data Length ADC0 Left Channel ADC0 Right Channel ADC1 Left Channel ADC1 Right Channel Stream ID Data Length ADC1 Left Channel ADC1 Right Channel ADC0 Left Channel ADC0 Right Channel The following figure describes the bus waveform for a 24-bit, 48KHz capture stream with ID set to 1. Figure 2. Multi-channel timing diagram BITCLK SDI 0 0 0 1 0 0 STREAM ID 1 1 DATA LENGTH 0 0 ADC0 L23 ADC0 L0 ADC0 R23 LEFT STREAM TAG ADC0 R0 ADC1 L23 RIGHT ADC1 L0 ADC1 R23 LEFT ADC0 ADC1 R0 RIGHT ADC1 DATA BLOCK ADC[1:0] Cnvtr Bit Number Sub Field Name [15] StrmType [14] FrmtSmplRate [13:11] SmplRateMultp Description Stream Type (TYPE): 0: PCM 1: Non-PCM (not supported) Sample Base Rate 0= 48kHz 1=44.1KHz Sample Base Rate Multiple 000=48kHz/44.1kHz or less 001= x2 010= x3 (not supported) 011= x4 192kHz only, 176.4 not supported 100-111= Reserved Table 8: Mult-channel TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 22 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO [10:8] SmplRateDiv [6:4] BitsPerSmpl [3:0] NmbrChan [7:4] Strm [3:0] Ch Sample Base Rate Divisor 000= Divide by 1 001= Divide by 2 (not supported) 010= Divide by 3 (not supported) 011= Divide by 4 (not supported) 100= Divide by 5 (not supported) 101= Divide by 6 (not supported) 110= Divide by 7 (not supported) 111= Divide by 8 (not supported) Bits per Sample 000= 8 bits (not supported) 001= 16 bits 010= 20 bits 011= 24 bits 100-111= Reserved Number of Channels Number of channels for this stream in each "sample block" of the "packets" in each "frame" on the link. 0000=1 channel (not supported) 0001 = 2 channels ... 1111= 16 channels. Software-programmable integer representing link stream ID used by the converter widget. By convention stream 0 is reserved as unused. Integer representing lowest channel used by converter. 0 and 2 are valid Entries If assigned to the same stream, one ADC must be assigned a value of 0 and the other ADC assigned a value of 2. Table 8: Mult-channel 2.14. EAPD The EAPD pin (pin 47) is a dedicated, bi-directional control pin. Although named External Amplifier Power Down (EAPD) by the HD Audio specification, this pin operates as an external amplifier power up signal. The EAPD value is reflected on the EAPD pin; a 1 causes the external amplifier to power up (equivalent to D0), and a 0 causes it to power down (equivalent to D3.) When the EAPD value = 1, the EAPD pin must be placed in a state appropriate to the current power state of the associated Pin Widget even though the EAPD value (in the register) may remain 1. The default state of this pin is 0 (driving low.) The pin defaults to an open-drain configuration (an external pull-up is recommended.) Per the HD Audio specification and HDA015-B, multiple ports may control EAPD. The EAPD pin assumes the highest power state of all the the EAPD bits in all of the pin complexes. The default value of EAPD is 1 (powered on), but the FG power state will override and the pin will be low. A port will request External Amp Power Up when its power state is active (FG and pin widget power state is D1 or D0) or (Analog PC_Beep is enabled and port is enabled as an output) and the port's EAPD bit is set to 1. The state of the EAPD pin (unless configured as an input or held low by an external circuit when configured as an open drain output) will be the logical OR of the external amp power up requests from all ports. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 23 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO By default, the EAPD pin also functions as the Mute#/ShutDown# input for the internal BTL amplifier. In this mode, a low value at the pin (either due to internal EAPD being 0, or to an external entity forcing the pin low) will cause the internal BTL amplifier to mute or enter a low power state depending on the amplifier configuration. (See below) Vendor specific verbs are available to configure this pin. These verbs retain their values across link and single function group resets but are set to their default values by a power on reset: MODE1 MODE0 EAPD Pin Function Description Value at pin is wired-AND of EAPD bit and external signal.(default) 0 0 Open Drain I/O 0 1 CMOS Output Value of EAPD bit in pin widget is forced at pin 1 0 CMOS Input External signal controls internal amps. EAPD bit in pin widget ignored 1 1 CMOS Input External signal controls internal amps. EAPD bit in pin widget ignored Table 9. EAPD Pin Mode Select Control Flag Description EAPD PIN MODE 1:0 Defines if EAPD pin is used as input, output, or bi-directional port (Open Drain) BTL/HP SD 0 = Amp controlled by EAPD pin only (default) / 1 = Amp controlled by power state (pin and FG) only BTL/HP SD MODE 0 = Amp will mute when disabled. / 1 = Amp will shut down (enter a low power state) when disabled (default for YA forward) BTL/HP SD INV 0 = AMP will power down (or mute) when EAPD pin is low (default) / 1 = Amp will power down (or mute) when EAPD pin is high. Table 10. Control bit descriptions for BTL amplifier and Headphone amplifier enable configurations BTL SD BTL SD MODE BTL SD INV EAPD Pin State BTL Amp State 0 0 0 0 Amplifier is mute (default1) 0 0 0 1 Amplifier is active 0 0 1 0 Amplifier is active 0 0 1 1 Amplifier is mute 0 1 0 0 Amplifier is in a low power state 0 1 0 1 Amplifier is active 0 1 1 0 Amplifier is active 0 1 1 1 Amplifier is in a low power state 1 0 NA NA Amplifier follows pin/function group power state and will mute when disabled 1 1 NA NA Amplifier follows pin/function group power state and will enter a low power state when disabled Table 11. BTL Amp Enable Configuration 1. EAPD bit is set to one by default but the EAPD state is 0 after power-on reset because the function group is not in D0. The state after a single or double function group reset will be compliant with HDA015-B. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 24 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO HP SD HP SD MODE HP SD INV EAPD Pin State Headphone Amp State 0 0 0 0 Amplifier is mute (default1) 0 0 0 1 Amplifier is active 0 0 1 0 Amplifier is active 0 0 1 1 Amplifier is mute 0 1 0 0 Amplifier is in a low power state 0 1 0 1 Amplifier is active 0 1 1 0 Amplifier is active 0 1 1 1 Amplifier is in a low power state 1 0 NA NA Amplifier follows pin/function group power state and will mute when disabled 1 1 NA NA Amplifier follows pin/function group power state and will enter a low power state when disabled 1. Table 12. Headphone Amp Enable Configuration EAPD bit is set to one by default but the EAPD state is 0 after power-on reset because the function group is not in D0. The state after a single or double function group reset will be compliant with HDA015-B. Port E Headphone Amp Enable Configuration Bits Normal Mode SD (EAPD Pin or power setting) Aux Mode Not supported1 SD INV Not supported1 SD MODE (power down or mute) supported2 Not supported1 1. Table 13. Port E Headphone Amp Enable Configuration support by part and mode Port E not headphone capable on the 92HD94 2. Port E is typically connected to the dock headphone port. In Aux mode, EAPD will mute the record path on the 92HD94. EAPD Pin value1 Description 0 Forced to low when in D2 or D3 Follows description in HD Audio spec. External amplifier is shut down when pin or function group power state is D2 or D3 independent of value in EAPD bit. 1 Forced low in D2 or D3 unless port is enabled as output Power state is ignored if port is enabled as output and port EAPD=1 to allow PC_Beep support in D2 and D3 Analog BEEP enabled 1. Table 14. EAPD Analog PC_Beep behavior When pin is enabled as Open Drain or CMOS output. AFG Power State RESET# Analog PC_BEEP Port Power State Pin Behavior D0-D3 Asserted (Low) - - Active low immediately after power on, otherwise the previous state is retained across FG and link reset events D0 De-Asserted (High) - - Active - Pin reflects EAPD bit unless held low by external source. D1 De-Asserted (High) - D0-D1 Active - Pin reflects EAPD bit unless held low by external source. D2 De-Asserted (High) Disabled D0-D2 Pin forced low to disable external amp Table 15. EAPD Behavior TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 25 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO AFG Power State RESET# Analog PC_BEEP Port Power State Pin Behavior D2 De-Asserted (High) Enabled D0-D2 Active - EAPD Pin high if any port EAPD bit =1 and that port also enabled as output. D3 De-Asserted (High) Disabled D0-D3 Pin forced low to disable external amp D3 De-Asserted (High) Enabled D0-D3 Active - EAPD Pin high if any port EAPD bit=1 and that port also enabled as output. D3cold De-Asserted (High) - - Pin forced low to disable external amp D4 De-Asserted (High) - - Pin forced low to disable external amp D5 De-Asserted (High) - - Pin Hi-Z (off) Table 15. EAPD Behavior Figure 3. HP EAPD Example to be replaced by single pin for internal amp HP AUDIO CONTROL BLOCK DIAGRAM SYNC FROM KBC TO OS SCAN CODES MUTE + UP/DOWN BUTTONS OS SYNC FROM AUDIO GUI TO KBC A_EAPD KBC GPIO_1 CODEC A_SD (MUTE LED ON SAME BOARD) SPKR_EN# SPKR AMP TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 26 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 4. EAPD implementation VDD Internal Headphone Amp Internal BTL Amp SD/Mute SD/Mute EAPD SD# External Power Amp EAPD PIN Control SMU MUTE OTHER CODEC 2.15. Digital Microphone Support The digital microphone interface permits connection of a digital microphone(s) to the CODEC via the DMIC0, DMIC1, and DMIC_CLK 3-pin interface. The DMIC0 and DMIC1 signals are inputs that carry individual channels of digital microphone data to the ADC. In the event that a single microphone is used, the data is ported to both ADC channels. This mode is selected using a vendor specific verb and the left time slot is copied to the ADC left and right inputs. The DMIC_CLK output is controllable from 4.704Mhz, 3.528Mhz, 2.352Mhz, 1.176Mhz and is synchronous to the internal master clock. The default frequency is 2.352Mhz. The two DMIC data inputs are reported as two stereo input pin widgets that incorporate a boost amplifier. The pin widgets are shown connected to the ADCs through the same multiplexors as the analog ports. Although the internal implementation is different between the analog ports and the digital microphones, the functionality is the same. In most cases, the default values for the DMIC clock rate and data sample phase will be appropriate and an audio driver will be able to configure and use the digital microphones exactly like an analog microphone. To conserve power, the analog portion of the ADC will be turned off if the D-mic input is selected. When switching from the digital microphone to an analog input to the ADC, the analog portion of the ADC will be brought back to a full power state and allowed to stabilize before switching from the digital microphone to the analog input. This should take less than 10mS. DMIC pin widgets support port presence detect directly using SENSE-B input. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 27 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO The codec supports the following digital microphone configurations: Digital Mics Data Sample ADC Conn. Notes 0 N/A N/A No Digital Microphones 0, or 1 Available on either DMIC_0 or DMIC_1 When using a microphone that supports multiplexed operation (2-mics can share a common data line), configure the microphone for "Left" and select mono operation using the vendor specific verb. "Left" D-mic data is used for ADC left and right channels. 0, or 1 Available on either DMIC_0 or DMIC_1, External logic required to support sampling on a single Digital Mic pin channel on rising edge and second Digital Mic right channel on falling edge of DMIC_CLK for those digital microphones that don't support alternative clock edge (multiplexed output) capability. 0, or 1 Requires both DMIC_0 and DMIC_1, External logic required to support sampling on a single Digital Mic pin channel on rising edge and second Digital Mic right channel on falling edge of DMIC_CLK for those digital microphones that don't support alternative clock edge (multiplexed output) capability. Two ADC units are required to support this configuration 0, or 1 Connected to DMIC_0 and DMIC_1, External logic required to support sampling on a single Digital Mic pin channel on rising edge and second Digital Mic right channel on falling edge of DMIC_CLK for those digital microphones that don't support alternative clock edge capability. Two ADC units are required to support this configuration 1 Single Edge 2 Double Edge on either DMIC_0 or 1 3 Double Edge on one DMIC pin and Single Edge on the second DMIC pin. 4 Double Edge Table 16. Valid Digital Mic Configurations Power State DMIC Widget Enabled? DMIC_CLK Output DMIC_0,1 Notes D0 Yes Clock Capable Input Capable DMIC_CLK Output is Enabled when either DMIC_0 or DMIC_1 Input Widget is Enabled. Otherwise, the DMIC_CLK remains Low D1-D3 Yes Clock Disabled Input Disabled DMIC_CLK is HIGH-Z with Weak Pull-down D0-D3 No Clock Disabled Input Disabled DMIC_CLK is HIGH-Z with Weak Pull-down D4 - Clock Disabled Input Disabled DMIC_CLK is HIGH-Z with Weak Pull-down D5 - Clock Disabled Input Disabled DMIC_CLK is HIGH-Z with Weak Pull-down Table 17. DMIC_CLK and DMIC_0,1 Operation During Power States TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 28 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 5. Single Digital Microphone (data is ported to both left and right channels Off-Chip On-Chip DMIC_0 OR DMIC_1 Digital Microphone Single Line In STEREO ADC0 or 1 PCM MUX Pin DMIC_CLK Pin Stereo Channels Output On-Chip Multiplexer Single Microphone not supporting multiplexed output. DMIC_0 Or DMIC_1 Valid Data Right Channel Valid Data Valid Data Left Channel DMIC_CLK Single "Left" Microphone, DMIC input set to mono input mode. DMIC_0 Or DMIC_1 Valid Data Valid Data Valid Data Valid Data Left & Right Channel DMIC_CLK TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 29 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 6. Stereo Digital Microphone Configuration Off-Chip Digital Microphones On-Chip External Multiplexer DMIC_0 Or DMIC_1 STEREO ADC0 or 1 PCM MUX MUX Pin On-Chip Multiplexer Stereo Channels Output DMIC_CLK Pin DMIC_0 Or DMIC_1 Valid Data R Right Channel Valid Data L Valid Data R Valid Data L Valid Data R Left Channel DMIC_CLK Note: Some Digital Microphone Implementations support data on either edge, therefore, the external mux may not be required. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 30 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 7. Quad Digital Microphone Configuration Off-Chip Digital Microphones External Multiplexer On-Chip On-Chip Multiplexer DMIC_0 MUX STEREO ADC0 PCM MUX Pin Stereo Channels Output For DMIC_0 L&R DMIC_CLK Pin On-Chip Multiplexer DMIC_1 MUX STEREO ADC1 PCM MUX Pin Stereo Channels Output For DMIC_1 L&R External Multiplexer Digital Microphones DMIC_0 DMIC_1 Valid Data R0 Valid Data L0 Valid Data R0 Valid Data L0 Valid Data R0 Valid Data R1 Valid Data L1 Valid Data R1 Valid Data L1 Valid Data R1 Right Channel Left Right Channel Channel Left Channel DMIC_CLK Note: Some Digital Microphone Implementations support data on either edge, in this case the external multiplexer is not required. 2.16. Analog PC-Beep The codec supports automatic routing of the PC_Beep pin to Port A, Port B, and Port D outputs when the HD-Link is in reset. When the link is active (not held in reset) Analog PC-Beep may be enabled manually. Analog PC_Beep is mixed at the port and only ports enabled as outputs will pass PC_Beep. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 31 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Beep activity monitoring is provided when the analog beep path is enabled and the CODEC or amplifier is in a low power state (D3). The Analog PC Beep input is sampled for 500us every 1ms. If the beep input is high or low (>200mVpp) for at least 37% of that time, it is considered active. If it is active for less than 7.5% of that time, it is possibly inactive. If no activity is detected for 64ms (128ms, 256ms and 512ms also selectable for the idle threshold), then beep is considered inactive. Figure 8. Analog PC Beep Active Phase 1: analog beep auto-routing phase in the period after application of DVDD, before the first rising edge of link reset. Once Analog PCbeep is detected(BEEP_PRESENCE=1) after 64ms delays (after POR (power on reset)), the Amplifier will be turned on(port_pwd=0, port_output_en=1, there is a timing between these two signals) and analog_beep_en=1. If BEEP_PRESENCE=0 for longer than the threshold time, the amplifiers will be turned off to save power and prevent unwanted system noise from being heard. Phase 2: When not in phase 1 A. If analog beep function is disabled by driver. Analog beep auto-detect will also be disabled. B. If analog beep function is enabled by driver. Once analog PCbeep is detected(BEEP_PRESENCE=1), analog pc_beep will be enabled If in D0-D2, enabled simply means muting or un-muting beep to avoid hearing system noise on the beep input pin but it is acceptable to turn off port amplifiers if not currently used by DACs, mixer, or beep to save power. If in D3, enabled means that the necessary amplifiers are turned on so that the beep signal may be heard on all ports configured as outputs (see analog pc-beep description section above) All needed amplifiers are enabled until BEEP_PRESENCE=0 for longer than the idle threshold A flow chart of Analog PC Beep is below. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 32 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO POR Wait 64mS IDLE NO Link Reset Active? NO NO Analog PC_Beep Enabled? NO YES Activity on Pin? NO YES YES Turn on Amplifiers / Enable Beep Path YES Activity on Pin? Activity on Pin? NO NO Inactivity over threshold? YES Disable Beep Path / Turn off Amplifiers Figure 9. Analog PC Beep Flow chart 2.17. Digital PC-Beep This block uses an 8-bit divider value to generate the PC beep from the 48kHz HD Audio Sync pulse. The digital PC_Beep block generates the beep tone on all Pin Complexes that are currently configured as outputs. The HD Audio spec states that the beep tone frequency = (48kHz HD Audio TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 33 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO SYNC rate) / (4*Divider), producing tones from 47 Hz to 12 kHz (logarithmic scale). Other audio sources are disabled when digital PC_Beep is active. It should be noted that digital PC Beep is disabled if the divider = 00h. PC-Beep may be attenuated and distorted when the CODEC is in D3 depending on the load impedance seen by the output amplifier since all ports are in a low power state while in D3. Load impedances of 10K or larger can support full scale outputs but lower impedance loads will distort unless the output amplitude is reduced. Digital PC_Beep requires a clock to operate and the CODEC will prevent the system from stopping the bus clock while in D3 by setting the Clock_Stop_OK bit to 0 to indicate that the part requires a clock. 2.18. Headphone Drivers The codec implements both traditional and cap-less headphone outputs. The Microsoft Windows Logo Program allows up to the equivalent of 100ohms in series. However, an output level of +3dBV at the pin is required to support 300mV at the jack with a 32ohm load and 1V with a 320 ohm load. Microsoft allows device and system manufactures to limit output voltages to address EU safety requirements. (WLP 3.09 - please refer to the latest Windows Logo Program requirements from Microsoft.) The codec does not support power limiting. Headphone performance will degrade if more than one port is driving a 32 ohm load. 2.19. BTL Amplifier An integrated class-D stereo BTL amplifier is provided to directly drive 4 ohm speakers (2W @ 4.75V) or 8 ohm speakers (1W @ 4.75V). No external filter is needed for cable runs of 18" or less. An internal DC blocking filter prevents distortion when the audio source has DC content, and prevents unintentional power consumption when pausing audio playback. The amplifier may be controlled using the EAPD pin (see EAPD section.) Using a vendor specific verb, the BTL amplifier may be configured to support a mono speaker connected to the L +/- pins. In this mode, the Left and Right audio is mixed and sent to the left output only. The right channel is turned off to conserve power. Maximum gain for the BTL amplifier is programmable. The following 4 gain settings relative to a nominal line output are desired: +6.5dB, +9.5dB, +14.5dB, +16.5dB. Absolute gain may vary and the suggested accuracy is +/-1.5dB. This gain is exposed in a vendor specific widget and is intended to mimic the pin programmable gain implemented in discrete BTL amplifiers commonly used in notebook computers. The BTL amplifier includes thermal management circuitry. When the CODEC reaches a temperature of about 140 degrees, the output amplitude of the BTL amp is gradually lowered until the temperature falls below 140. All other functions will remain active if the BTL amplifier is shut down due to die temperature. 2.20. BTL Amplifier High-Pass Filter For mobile applications, speakers are often incapable of reproducing low frequency audio and unable to handle the maximum output power of the BTL amplifier. A high-pass filter is implemented in the BTL output path to reduce the amount of low frequency energy reaching speakers attached to the BTL amplifier. This can prevent speaker failure. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 34 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.20.1. Filter Description The high-pass filter is derived from the common biquadratic filter and provides a 12dB/octave roll-off. The filter may be programmed for a -3dB response at: 100Hz, 200Hz, 300Hz, 400Hz, 500Hz, 750Hz, 1KHz, or 2KHz. The high pass filter is enabled by default with a cut-off frequency of 300Hz. The filter may be bypassed using the associated verb (processing state verb). The analog PC_Beep input is not affected by the digital high-pass filter. To ensure that the speakers attached to the BTL amplifier are not harmed by low frequency audio entering the PC_Beep input, an external filter must be implemented. Fortunately, it is common practice to implement an attenuation circuit and DC blocking capacitor at the PC_Beep input. This attenuator/filter is easily adjusted to restrict low frequency audio. The easiest approach is to reduce the value of the DC blocking capacitor but other approaches are equally effective. 2.21. EQ There are 5 bands of parametric EQ (bi-quad) per channel. Due to the flexibility of the bi-quad implementation, each filter band may be configured as a high-pass, low-pass, band-pass, high shelving, low shelving, or other function. Each band has an independent set of coefficients. A bi-quad filter has 6 coefficients. One coefficient is normalized to 1 and 5 are programmed into the core. Each band supports up to +15dB boost or up to -36dB cut. 2.22. Combo Jack Detection 4 conductor (combo) jacks are becoming popular. In the most common implementation the 4 conductor plug has the same mechanical dimensions as a 3 conductor 3.5mm plug but the sleeve portion has been split into two segments:S1 and S2. When a 4-conductor plug (headset) is inserted into the jack T (Tip) = Left headphone audio, R (Ring) = Right headphone audio, S1 (First half of sleeve) = microphone input, and S2 (Second half of sleeve) = return (GND). When a 3-conductor plug (headphones) is inserted into the jack; T=Left audio, R=Right audio, S1=GND, S2=GND. By monitoring the S1 connection to see if it is shorted to ground, we can distinguish between headsets and headphones. Please note that analog microphone plugs (3-conductor-Lmic/Rmic/GND) and optical SPDIF plugs can not be supported using this implementation. M IC G N D Figure 10. Combo Jack Plug insertion is reported on the headphone port using the switch integrated into the jack. The internal circuit monitors the voltage at the jack to determine if a low impedance load is present. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 35 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Detection of a microphone is not reported unless plug insertion is also detected. 2.23. GPIO 2.23.1. GPIO Pin mapping and shared functions GPIO # Pin Supply 0 46 DVDD 1 2 DVDD 2 4 DVDD 3 48 DVDD 4 24 AVDD 2.23.2. SPDIF In SPDIF Out GPI/O YES YES GPI GPO VrefOut DMIC VOL Pull Up Pull Down YES IN 50K YES CLK 50K YES IN YES 50K 50K YES YES 50K SPDIF/Digital Microphone/GPIO Selection 3 functions are available on the DMIC_1/GPIO0/SPDIFOUT1 pin (pin 46). To determine which function is enabled, the order of precedence is followed: 1. If the GPIOs are enabled, they override both SPDIF_OUT and Digital Mics 2. If the GPIOs are not enabled through the AFG, then at reset, the pin is pulled low by an internal pull-down resistor. 3. If the port is enabled as an input, the digital microphones will be used. 4. If the port is enabled as an output, the SPDIF output will be used. 5. In the event that the port is enabled as an input and an output, the port will be an output and the Digital Mic path will be mute. 2.23.3. Digital Microphone/GPIO Selection 2 functions are available on the DMIC_CLK/GPIO1 (pin 2) and the DMIC_0/GPIO2 (pin 4) pins. To determine which function is enabled, the order of precedence is followed: 1. If GPIOs are not enabled through the AFG, then at reset, pins 2 and 4 are pulled low by an internal pull-down resistor. 2. If the GPIO 1 is enabled, the 2 DMIC pins become mute (unless programmed for GPIO or SPDIF use) and pin 2 becomes GPIO with an internal pull-down. 3. If GPIO2 is enabled through the AFG, pin 4 becomes a GPIO and is pulled low by an internal pull-down resistor. 4. If the port is enabled as an input, the digital microphones will be used. 5. If the port is not enabled as an input or if the pin is configured as a GPIO, the digital microphone path will be mute. 2.24. HD Audio HDA015-B support The codec provides complete support for the HDA015-B specification (now DCN) building on the support already present in previous products. HDA015-B features supported are: 1. Persistence of many configuration options through bus and function group reset. 2. The ability to support port presence detect in D3 even when the HD Audio bus is in a low power state (no clock.) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 36 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3. Fast resume times from low power states: 1ms D1 to D0, 2ms D2 to D0, 10mS D3 to D0. 4. Notification if persistent register settings have been unexpectedly reset. 5. SPDIF active in D3 (required) 2.25. Digital Core Voltage Regulator The digital core operates from a 1.8V (10%) supply voltage. Many systems require that the CODEC use a single 3.3V digital supply, so an integrated regulator is included on die. The regulator uses pin 9, DVDD, as its voltage source. The output of the LDO is connected to pin 1 and the digital core. A 10uF capacitor must be placed on pin 1 for proper load regulation and regulator stability. The digital core voltage regulator is only dependent on DVDD. DVDDIO may be either 3.3 or 1.5V and may precede or follow DVDD in sequence. The CODEC digital logic and I/O (unless referenced to AVDD) will operate in the absence of AVDD. DVDD and AVDD supply sequencing for the application of power and the removal of power is neither defined nor guaranteed. It is common for desktop systems to supply AVDD from the system standby supply and the CODEC will tolerate, indefinitely, the condition where AVDD is active but DVDD and DVDDIO are inactive. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 37 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.26. Aux Audio Support The CODEC supports an auxiliary audio mode where audio routing is supported by default after power is supplied with the HD Audio bus disabled. In this mode, an I2S input is routed to one of several output ports depending on jack presence detection, likewise seceral audio sources (analog, diginal mic, I2S) are routed and converted to an I2S output. In addition to shutting of the CODEC BTL and headphone amplifiers when the dock output jack is used, the BTL amplifier will be disabled when the headphone jacks are used, and the headphone amplifiers will be disabled when not in use. 2.26.1. General conditions in Aux Audio Mode: HD Audio Link is off (RST# is 0, active, and BitClk is 0, inactive. CODEC does not need to monitor BitClk to enter/exit this mode but must not depend on BitClk to operate.) (Part will enter Aux Audio Mode immediately on application of power if Aux Audio Mode is enabled as default.) OR HD Audio CODEC function group power state is set to D3cold and Aux Audio Mode is enabled. (Device enters immediately on transition to D3cold and remains in Aux mode until a double AFG reset event is received or until the next rising edge of RST#) * HD Audio CODEC analog and digital supplies are active. * Port A connects to the system microphone jack. * Port B connects to the system headphone jack. * Port C is not used * Port D connects to the internal speakers. * Port E is connected to the dock Line Out jack/AUX Audio out (it is an output port) * Port F is connected to the dock Mic Input jack/AUX Audio In (it is an input port) * The digital microphone clock is generated by the CODEC. The DMIC data is converted to PCM and sent to the Aux Audio Module through the Aux Out port. * The System microphone jack (Port A) is available to the auxiliary audio subsystem. Vref_Out will be enabled when the system Mic is plugged in. * EAPD is used to control the power state of the mixer, BTL amplifier, and headphone amplifiers. The amplifiers are off if EAPD is held low. * Internal circuitry will delay enabling (change power state, un-mute, etc.) the output amplifiers a sufficient amount of time after the application of power or EAPD=1 to prevent pops. * Internal circuitry will orchestrate power down (EAPD = 0) to prevent pops. * EAPD must be forced low before removing power. * No special Dock signal present for the CODEC. Only port presence detect for the dock Line Out (port E) and MinIN (Poer F) are used. * ECR15b operation does not presents a problem. The CODEC will not enter Aux Audio mode unless the function group power state is set to D3cold prior to putting the HD Audio interface into reset (controller D3.)To prevent undesirable behavior (pops, etc.) the bus must not be placed into reset with the clock stopped unless EAPD is forced low or D3cold has been set. The Enable bit in the Aux Audio vendor specific verb is provided so firmware or other software can disable Aux Audio support. The default value of this bit is determined by a bond option and may be determined by reading the device ID. This bit only returns to its default value when a power on reset event is generated or when programmed to that value by software. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 38 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.26.2. Entering Aux Audio Mode Enter AUX mode under two conditions, refer to figure below: * When DVDD is powered-up, the value of AUX_enable register is "enabled" (one), and before link reset is de-asserted (pull high). * If AUX_enable is "enabled" (one) and the Power state is D3cold then chip will also enter AUX mode but the Clock_Stop_OK flag is not required (set to 1 if convenient.). (Note that the part will enter Aux mode immediately upon transition to D3cold. It is possible to return to normal operation by issuing a double AFG reset if the link is still active.) Note: At that time, Force Portsense and BTL Amp on when we enter link reset if the AuxAudio bit is set. If the AuxAudio bit is not set (by bond option or software) then we will not enter Aux Audio Mode-Portsense and BTL Amp will remain off. Port F ("dock microphone") input is routed to Port D ("internal speakers"), Ports B (system headphone port), and Port E ("dock Line Out") directly. The analog mixer is disabled to reduce power consumption. Figure 11. Switching between Normal and Aux Audio Modes DVDD Dig_POR Power state D3 D0 D3 D0 D3 cold Link_reset AUX_enable (register) Operation mode AUX_mode TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Normal mode D3 with clock 39 D3 clockless Normal mode AUX_mode V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.26.3. "Playback Path" Port Behavior (AnaIog I/O) Port F ("dock microphone") input is routed to Port D ("internal speakers"), Ports B (system headphone port), and Port E ("dock Line Out") directly. The analog mixer is disabled to reduce power consumption. 2.26.4. 2.26.5. When Port E presence detect = 0 * Presence detect for Port E = 0 (nothing plugged in) * If Port B is in use (port presence detect = 1), Port D, internal speakers, will be inactive (off) * The power supply (charge pump) for B will be inactive if B is not in use. * If Port B is not in use (port presence detect = 0), Port D, internal speakers, will be active and port B will be inactive. * EAPD must not be forced low due to the dock being absent or high when a dock is present. EAPD is used to indicate if AUX Audio Mode is in use. When Port E presence detect = 1 * Presence detect for Port E = 1 (something plugged in) * Port D is disabled * If Port B is in use (port presence detect = 1), that port will be enabled and output the audio entering Port F * The power supply for port B will be active if port B is in use. * If Port B is not in use (port presence detect = 0), port B will be inactive and the audio on Aux_In will be mixed with the audio from the Secondary Audio input and routed to Port E, the dock headphone jack. * EAPD must not be forced low due to the dock being absent or high when a dock is present. EAPD is used to indicate if AUX Audio Mode is in use. EAPD (pin) Aux Support Enable1 Port E detect Port B detect Port A, C, F, DMIC detect Port D behavior Port B behavior Port E behavior 0 NA NA NA NA disabled disabled disabled (mute) 1 0 NA NA NA Widget controlled Widget controlled Widget controlled disabled disabled (mute) 1 1 0 0 NA enabled (F to D) 1 1 0 1 NA disabled enabled (F to B) disabled (mute) 1 1 1 0 NA disabled disabled enabled Aux+Secondary 1 1 1 1 NA disabled enabled (F to B) disabled (mute) 1.default value for Aux Audio Enable is determined by bond option. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 40 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.26.6. "Record Path" Port Behavior (Analog I/O) Digital Microphone input DMIC0 is used as an internal microphone port in normal mode. The Digital Microphone clock pin is enabled in Aux Audio Mode and the digital microphone clock is provided by an internal oscillator. If Port F and Port A presence detect = 0, this indicates that nothing is plugged into the dock or system; the digital microphone input is converted to analog and sent to the Aux Audio Module through Port E. If Port A presence detect = 1, this indicates that an external microphone is plugged into the system jack and port A is sent to the Auxiliary Audio Module through Port E. If Port F presence detect = 1 (and Port A presence detect = 0), this indicates that an external microphone is plugged into the dock. External circuitry routes the dock microphone to the Auxiliary Audio Module. EAPD (pin) Aux Support Enable1 0 X 1 0 1 1 0 D MIc0 detect Port A detect Port F detect Ports B, C, E detect X X X NA disabled X X X NA Widget controlled 0 0 NA Mute Aux_Out behavior 1 1 1 0 0 NA DMIC converted to analog and routed to module through port E. DMIC Clock provided by CODEC 1 1 X 0 1 NA Dock Mic routed to module (not through CODEC) CODEC DMIC interface and Port A disabled 1.default value for Aux Audio Enable is determined by bond option. 2.26.7. SYSTEM DIAGRAMS (Analog I/O) Figure 12. Aux Audio Playback When Nothing Plugged In (or System is not Docked) Playback Speaker HD Audio Interface D-MIC DM MIC A DAC S HP E I2S CODEC I2S Routing F HP B S SPKR D EQ NA C Aux Audio Module Filter TSITM CONFIDENTIAL MIC S PC Beep (c)2014 TEMPO SEMICONDCUTOR, INC. Dock EC 41 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 13. Aux Audio Playback When System Headphones are Plugged In Playback Headphone HD Audio Interface D-MIC DM MIC A DAC HP E S I2S CODEC Dock I2S Routing F HP B S SPKR D EQ NA C MIC S Aux Audio Module PC Beep Filter EC Figure 14. Aux Audio Playback when the System is Docked and Headphones are Plugged In Playback Dock Headphone HD Audio Interface D-MIC DM MIC A DAC S HP E I2S CODEC I2S Routing Dock F HP B S SPKR D EQ NA C MIC S Aux Audio Module PC Beep Filter EC Figure 15. Aux Audio Record when Nothing is Plugged In (or The System is not Docked) Record Digital Mic HD Audio Interface D-MIC DM DAC S MIC HP E A I2S CODEC HP B S SPKR D EQ NA C MIC Aux Audio Module Filter TSITM CONFIDENTIAL Dock S PC Beep (c)2014 TEMPO SEMICONDCUTOR, INC. I2S Routing F EC 42 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Figure 16. Aux Audio Record when the System is Docked with the System Microphone Plugged In Record Analog Mic HD Audio Interface D-MIC DM MIC A DAC HP E S I2S CODEC I2S Routing Dock F HP B S SPKR D EQ NA C MIC S Aux Audio Module PC Beep Filter EC Figure 17. Aux Audio Record when the System is Docked with the Dock Microphone Plugged In Record Dock Mic HD Audio Interface D-MIC DM MIC A DAC S HP E I2S CODEC F HP B S SPKR D EQ NA C Dock MIC S Aux Audio Module PC Beep Filter 2.26.8. I2S Routing EC EAPD Since the Aux Audio mode overrides the default behavior but not the actual port settings when in reset, the logical state of the EAPD pin must be overridden as well. When Aux Audio mode is enabled and the part is in reset as described above, the logical state of EAPD will be 1 (External Amplifier Powered Up) unless held low by an external circuit. This ensures that audio pass-thru and analog PC_Beep will be supported. 2.26.9. Analog PC_Beep Analog PC_Beep is supported in Aux Audio mode. By default, analog PC_Beep is disabled but may be enabled due to Beep pass-thru support in reset (see the PC_Beep section). If the CODEC is programmed to enable analog PC_Beep and Aux Audio mode is enabled, the next time reset is asserted, the analog PC_Beep pin will be mixed at each of the active outputs. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 43 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 2.26.10. Class-D BTL Issues While in Aux Audio mode the HD Audio bus clock (BitClk) is not available. The Class-D controller requires a very high speed clock to operate and an internal clock must be provided. In Aux Audio mode, the actual frequency used by the Class-D controller and its associated ADC will not be exact since an external reference will not be available.The performance characteristics in Aux Audio Mode will be degraded compared to the normal operating mode characteristics specified elsewhere in this document. 2.26.11. Firmware/Software Requirements: The reconfiguration outlined in this chapter is autonomous (without the help of firmware or OS driver.) This autonomous mode does not interfere with normal operation. If it is desirable to stop the HD Audio bus while the CODEC is in D3 under OS control per DCN HDA015-B, no action is required. The CODEC will not enter Aux Audio Mode unless placed in D3cold. 2.27. Microphone Mute Input Available on silicon revision WB and beyond. The 92HD91 supports a microphone mute input. An external switch or other circuit may directly mute the CODEC without relying on software control. This is a most helpful feature for allowing the end user to conveniently enforce privacy since it bypasses the record gain/mute functions typically controlled by software. While recording is muted, any active stream will receive digital silence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 44 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3. CHARACTERISTICS 3.1. Electrical Specifications 3.1.1. Absolute Maximum Ratings Stresses above the ratings listed below can cause permanent damage to the 92HD91. These ratings, which are standard values are stress ratings only. Functional operation of the device at these or any other conditions above those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range. Item Pin Analog maximum supply voltage Digital maximum supply voltage Maximum Rating AVdd 6 Volts DVdd 5.5 Volts PVdd 6 Volts VREFOUT output current 5 mA Voltage on any pin relative to ground Vss - 0.3 V to Vdd + 0.3 V Operating temperature 0 oC to +70 oC -40 oC to +85oC (INDUSTRIAL TEMP, see part number list) Storage temperature -55 oC to +125 oC Soldering temperature Soldering temperature information for all available in the package section of this datasheet. Table 18. Electrical Specification: Maximum Ratings 3.1.2. Recommended Operating Conditions Parameter Power Supplies Power Supply Voltage Min. Typ. Max. Units 1.6 1.8 1.98 V DVDD_IO (3.3V signaling) 3.135 3.3 3.465 V DVDD_IO (1.5V signaling) 1.418 1.5 1.583 V Digital - 3.3 V 3.135 3.3 3.465 V Analog - 5 V 4.75 5 5.25 V +70 C Tcase +90 C Tcase Industrial +110 C DVDD_Core Ambient Operating Temperature Case Temperature 0 Table 19. Recommended Operating Conditions TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 45 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO ESD: The 92HD91 is an ESD (electrostatic discharge) sensitive device. The human body and test equipment can accumulate and discharge electrostatic charges up to 4000 Volts without detection. Even though the 92HD91 implements internal ESD protection circuitry, proper ESD precautions should be followed to avoid damaging the functionality or performance. 3.2. 92HD91 Analog Performance Characteristics (Tambient = 25 C, AVdd = 4.75V (4.5-5.25V) or 3.3V +/-5%, DVdd = 3.3V 5% or 1.8V 10%, AVss=DVss=0V; 20Hz to 20KHz swept sinusoidal input; Sample Frequency = 48 kHz; 0dB FS = 1Vrms for AVdd = 4.75V and 0.71Vrms for AVdd = 3.3V, 10K//50pF load, Testbench Characterization BW: 20 Hz - 20 kHz, 0 dB settings on all gain stages) Parameter Min Conditions Typ Max Unit Digital to Analog Converters Resolution 24 Bits -60dB FS signal level, Analog Mixer disabled 98 dB Analog Mixer Disabled, PCM data 98 dB THD+N3 - DAC to All Line-Out Ports Analog Mixer Disabled,-3dB FS Signal, PCM data 89 dBr SNR2 - DAC to All Headphone Ports Analog Mixer Disabled, 10K load, PCM data 98 dB THD+N3 - DAC to All Headphone Ports Analog Mixer Disabled,-3dB FS Signal, 10K load, PCM data 87 dBr SNR2 - DAC to All Headphone Ports Analog Mixer Disabled, 32 load, PCM data 98 dB THD+N3 - DAC to All Headphone Ports Analog Mixer Disabled, -3dB FS Signal, 32 load, PCM data 73 dBr Dynamic Range1: PCM to All Analog Outputs SNR2 - DAC to All Line-Out Ports Any Analog Input (ADC) to DAC Crosstalk 10KHz Signal Frequency. 0dBV signal applied to ADC, DACs idle, ports enabled as output. -65 - - dB Any Analog Input (ADC) to DAC Crosstalk 1KHz Signal Frequency. see above -65 - - dB DAC L/R crosstalk DAC to LO or HP 20-15KHz into 10K load 70 73 dB DAC L/R crosstalk DAC to HP 20-15KHz into 32 load 65 68 dB Gain Error Interchannel Gain Mismatch D/A Digital Filter Pass Band Analog Mixer Disabled 0.5 dB Analog Mixer Disabled 0.5 dB 21,000 Hz 0.125 +/- dB 4 20 - D/A Digital Filter Pass Band Ripple5 D/A Digital Filter Transition Band 21,000 - 31,000 Hz D/A Digital Filter Stop Band 31,000 - - Hz D/A Digital Filter Stop Band Rejection6 -100 - - dB D/A Out-of-Band Rejection7 -55 - - dB Group Delay (48KHz sample rate) - - 1 ms Attenuation, Gain Step Size DIGITAL - 0.75 - dB Table 20. 92HD91 Analog Performance Characteristics TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 46 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Parameter Min Typ Max Unit DAC Offset Voltage - 10 20 mV Deviation from Linear Phase - 1 10 deg. Conditions Analog Outputs Full Scale All Mono/Line-Outs DAC PCM Data 1.00 - - Vrms Full Scale All Mono/Line-Outs DAC PCM Data 2.83 - - Vp-p 32load 40 60 - mW (peak) Amplifier output impedance Mono/Line Outputs Headphone Outputs 150 0.1 External load Capacitance Mono/Line Outputs Headphone Outputs All Headphone Capable Outputs Ohms 220 pF Analog inputs Full Scale Input Voltage 0dB Boost @4.75V (input voltage required for 0dB FS output) 1.05 - - Vrms All Analog Inputs with boost 10dB Boost 0.320 - - Vrms All Analog Inputs with boost 20dB Boost 0.105 - - Vrms All Analog Inputs with boost 30dB Boost 0.032 - - Vrms 2 dB Boost Gain Accuracy -2 Input Impedance - 50 - K Input Capacitance - 15 - pF Analog Mixer Dynamic Range: PCM to All Analog Outputs -60dB FS signal level Analog Beep enabled all other mixer inputs mute 95 dB SNR2 - All Line-Inputs to all Line Outputs All inputs unmuted, single line input driven by ATE. 90 dB THD+N3 - All Line-Inputs to all Line Outputs 0dB Full Scale Input on one input, all others silent. 83 dBr SNR2 - DAC to All Ports Analog Mixer Enabled, PCM data, all others inputs mute. 98 dB THD+N3 - DAC to All Ports Analog Mixer Enabled, 0dB FS Signal, PCM data, all others inputs unmute/silent 85 dBr Attenuation, Gain Step Size ANALOG - 1.5 - dB Analog to Digital Converter Resolution 24 Bits 94 dB 20dB Boost High Pass Filter Enabled, -60dB FS 90 dB High Pass Filter enabled, -3dB FS signal level 83 dB Full Scale Input Voltage 0dB Boost (input voltage required to generate 0dBFS per AES 17) Dynamic Range1, All Analog Inputs to A/D High Pass Filer Enabled, -60dB FS, No boost Full Scale Input Voltage 20dB Boost (input voltage required to generate 0dBFS per AES 17) Dynamic Range1, All Analog Inputs to A/D THD+N3 All Analog Inputs to A/D 1.05 0.105 Table 20. 92HD91 Analog Performance Characteristics TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 47 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Parameter Min Conditions 20dB Boost, High Pass Filter enabled, -3dB FS signal level THD+N3 All Analog Inputs to A/D Typ Max 80 Unit dB Analog Frequency Response8 10 - 30,000 Hz A/D Digital Filter Pass Band4 20 - 21,000 Hz 0.1 +/- dB A/D Digital Filter Pass Band Ripple5 A/D Digital Filter Transition Band 21,000 - 31,000 Hz 31,000 - - Hz -100 - - dB 48 KHz sample rate - - 1 ms Any unselected analog Input to ADC Crosstalk 10KHz Signal Frequency -65 - - dB Any unselected analog Input to ADC Crosstalk 1KHz Signal Frequency -65 - - dB Any selected input to ADC 20-15Khz -65 dB DAC output 0dBFS. All outputs loaded. Input to ADC open. 20-15Khz -65 dB A/D Digital Filter Stop Band A/D Digital Filter Stop Band Rejection Group Delay ADC L/R crosstalk DAC to ADC crosstalk 6 Spurious Tone Rejection9 - -100 - dB Attenuation, Gain Step Size (analog) - 1.5 - dB Interchannel Gain Mismatch ADC - - 0.5 dB Power Supply Power Supply Rejection Ratio 10kHz - -60 - dB Power Supply Rejection Ratio 1kHz - -70 - dB D0 Didd10 3.3V 25 mA D0 Aidd10 5V 66 mA D0 Didd11 3.3V 17 mA D0 Aidd11 5V 54 mA D1 Didd12 3.3V 10 mA D1 Aidd12 5V 30 mA 3.3V 8 mA 5V 7 mA 3.3V 2 mA D2 Didd D2 Aidd D3 (Beep enabled) Didd13 13 D3 (Beep enabled) Aidd 5V 6 mA D3 Didd13 3.3V 2 mA D3 Aidd13 5V 4 mA D3cold Didd13 3.3V 1.3 mA D3cold Aidd13 5V 3.5 mA Vendor D4 Didd 3.3V 1.1 mA Vendor D4 Aidd 5V 3.5 mA Table 20. 92HD91 Analog Performance Characteristics TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 48 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Parameter Conditions Min Typ Max Unit Vendor D5 Didd 3.3V 1 mA Vendor D5 Aidd 5V 0.3 mA Voltage Reference Outputs VREFOut14 - 0.5 X AVdd - V VREFOut Drive 1.6 mA VREFILT (VAG) 0.45 X AVdd V Phased Locked Loop PLL lock time 96 200 usec PLL (or HD Audio Bit CLK) 24MHz clock jitter 150 500 psec ESD / Latchup IEC1000-4-2 1 Level JESD22-A114-B 2 Class JESD22-C101 4 Class Table 20. 92HD91 Analog Performance Characteristics 1.Dynamic Range is the ratio of the full scale signal to the noise output with a -60dBFS signal as defined in AES17 as SNR in the presence of signal and outlined in AES6id, measured "A weighted" over 20 Hz to 20 kHz bandwidth 2.Ratio of Full Scale signal to idle channel noise output is measured "A weighted" over a 20 Hz to a 20 kHz bandwidth. (AES17-1991 Idle Channel Noise or EIAJ CP-307 Signal-to-noise Ratio). 3.THD+N ratio as defined in AES17 and outlined in AES6id,non-weighted, over 20 Hz to 20 kHz bandwidth.Results at the jack are dependent on external components and will likely be 1 - 2dB worse. 4.Peak-to-Peak Ripple over Passband meets 0.125dB limits, 48 kHz or 44.1 kHz Sample Frequency. 1dB limit. 5.Peak-to-Peak Ripple over Passband meets 0.125dB limits, 48 kHz or 44.1 kHz Sample Frequency. 1dB limit. 6.Stop Band rejection determines filter requirements. Out-of-Band rejection determines audible noise. 7.The integrated Out-of-Band noise generated by the DAC process, during normal PCM audio playback, over a bandwidth 28.8 to 100 kHz, with respect to a 1 Vrms DAC output. 8. 1dB limits for Line Output & 0 dB gain, at -20dBV 9.Spurious tone rejection is tested with ADC dither enabled and compared to ADC performance without dither. 10.All functions/converters active, pin complexes enabled, two FDX streams, line (10Kohm) loads. Add 24mA analog current per stereo 32 ohm headphone. 11.One stereo DAC and corresponding pin widgets enabled (playback mode) 12.Mixer enabled 13.Idle measurement D3 set for minimum clicks/pops (biases and min. amps. on) 14.Can be set to 0.5 or 0.8 AVdd. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 49 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3.3. Class-D BTL Amplifier Performance Parameter Min Output Power (BTL 4 ohm, 5V, <1% THD+N) Typ Max 2 Unit W Output Power (BTL 4 ohm, 5V, <10% THD+N) 3 W Amplifier Efficiency (4, 5V, 2W) 86 % THD+N (BTL 4, 5V, FS) 1 THD+N (BTL 4, 5V, -3dBFS) 0.3 Frequency Response 20 PWM frequency - % % 20K Hz 352.8 KHz Output voltage noise (4, 5V) 65 uV Idle current 3.6 mA Shutdown current .2 mA Table 21. Class-D BTL Amplifier Performance TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 50 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3.4. Capless Headphone Supply Characteristics Parameter Min Typ Max Unit LDO idle current 1 2 mA Capless Headphone Amp idle current 2 3 mA Charge Pump idle current 4 6 mA Charge Pump shutdown time 1 mS Charge Pump start-up time 10 mS Frequency 384 KHz C1/C2 cap value 2.2 uF Table 22. Capless Headphone Supply 3.5. AC Timing Specs 3.5.1. HD Audio Bus Timing Parameter Definition BCLK Frequency Symbol Average BCLK frequency BCLK Period Min Typ Max Units 23.9976 24.0 24.0024 Mhz 41.67 42.171 ns Period of BCLK including jitter Tcyc 41.163 BCLK High Phase High phase of BCLK T_high 17.5 24.16 ns BCLK Low Phase Low phase of BCLK T_low 17.5 24.16 ns 500 ps 11 ns BCLK jitter BCLK jitter 150 SDI delay Time after rising edge of BCLK that SDI becomes valid T_tco 3 SDO setup Setup for SDO at both rising and falling edges of BCLK T_su 5 ns SDO hold Hold for SDO at both rising and falling edges of BCLK T_h 5 ns Table 23. HD Audio Bus Timing Figure 18. HD Audio Bus Timing TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 51 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 3.5.2. SPDIF Timing Parameter Definition Symbol SPDIF_OUT Frequency highest rate of encoded signal 64 times the sample rate SPDIF_OUT unit interval 1/(128 times the sample rate) SPDIF_OUT jitter UI Min Typ Max Units 2.8224 3.072 12.288 MHz 177.15 162.76 40.69 ns 4.43 ns SPDIF_OUT jitter SPDIF_OUT rise time T_rise 15 ns SPDIF_OUT fall time T_fall 15 ns Table 24. SPDIF Timing 3.5.3. Digital Microphone Timing Parameter Definition DMIC_CLK Frequency Symbol Average DMIC_CLK frequency DMIC_CLK Period Period of DMIC_CLK Tdmic_cyc Min Typ Max Units 1.176 2.352 4.704 MHz 850.34 425.17 212.59 ns 5000 ps DMIC_CLK jitter DMIC_CLK jitter DMIC Data setup Setup for the microphone data at both rising and falling edges of DMIC_CLK Tdmic_su 5 ns DMIC Data hold Hold for the microphone data at both rising and falling edges of DMIC_CLK Tdmic_h 5 ns Table 25. Digital Mic timing 3.5.4. GPIO Characteristics Parameter Definition Symbol Min Typ Max Units Input High Voltage1 input level at or above which a 1 is reliably recorded Vih 0.6 x VDD Input Low Voltage1 input level at or below which a 0 is reliably recorded. VDD may be DVDD or AVDD Vil Output High Voltage iout = 4mA VDD may be DVDD or AVDD depending on pin Voh Output Low Voltage iout = -4mA VDD may be DVDD or AVDD depending on pin Vol Input rise/fall time transition time between 10% and 90% of supply T_rise/T_fall Input/Tristate High Leakage Current Vin = VDD VDD may be DVDD or AVDD depending on pin (does not include pull-up or pull-down resistor if present) 0.5 uA Vin = 0 Input/Tristate Low Leakage VDD may be DVDD or AVDD depending on pin Current (does not include pull-up or pull-down resistor if present) -50 uA V 0.35 x VDD 0.9 x VDD V V 0.1 x VDD V 10 ns Table 26. GPIO Characteristics 1.High peak currents during dynamic switching of the Class-D PWM Outputs can result in Ground Rail Bounce. The amount of Ground Bounce should be kept below 0.35 x VDD for all Inputs, including internal logic which is tied to DVDD_CORE. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 52 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 4. FUNCTIONAL BLOCK DIAGRAM ADC0 ADC1 MixerOutVol DAC0 DAC1 PCM to SPDIF OUT HP +0/+10/+20/+30 dB DAC0_Dig MUX DAC1_Dig vol Digital Mute DAC 1 MUX DAC0 Digital PC Beep MixerOutVol DAC0 DAC1 DAC1 Pin Complex Pins 28/29 Cap-less Analog Beep PORT B HP Pin Complex Pins 31/32 Analog Beep MUX DAC 0 Digital PC Beep MixerOutVol DAC0 DAC1 MUX MUX vol Digital Mute Mic Bias PORT A Boost SPDIF OUT0 Pin 48 MUX MUX Stream & Channel Select Stream & Channel Select Port A ADC0 ADC1 Stream & Channel Select Analog Beep MUX MUX Stream & Channel Select SPDIF OUT1 (shared) Pin 46 MUX Digital PC Beep PCM to SPDIF OUT LO Port C Mic Bias PORT C Boost +0/+10/+20/+30 dB DAC1 mute vol Port A mute vol Port C mute vol Port E mute vol Port F Clocking Digital PC Beep MixerOutVol_Dig DAC0_Dig DAC1_Dig -34.5 to +12 dB In 1.5 dB steps ADC -16 to +30 dB In 1 dB steps mute Port E Digital PWM controller Class-D PORT D BTL Analog Beep_Dig MixerOutVol DAC0 DAC1 Bandpass Filter DAC M LO Stereo to Mono mix LO Port E PORT E Boost Pin Complex Pins 15/16 +0/+10/+20/+30 dB Digital PC Beep Analog Beep DMIC1 MixerOutVol DAC0 DAC1 MUX Port F DMIC0 Pin Complex Pins 40/41/43/44 LO Port F PORT F Boost +0/+10/+20/+30 dB Pin Complex Pins 17/18 Mixer -16 to +30 dB In 1 dB steps ADC1 mute Gain Port A Port C vol MUX Stream & Channel Select Mono Pin Complex Pin 25 Analog Beep Port C vol Gain Highpass Filter Port A MUX ADC0 5-band EQ Digital PC Beep Mixer Stream & Channel Select MUX MixerOutVol_Dig DAC0_Dig DAC1_Dig Analog Beep_Dig MUX Digital PC Beep MUX MixerOutVol_Dig vol MUX -46.5 to 0 dB In 1.5 dB steps mute MUX Vol DAC0 MUX HD Audio LINK LOGIC MixerOutVol mute vol MUX Mixer mute Pin Complex Pins 19/20 Port E Port F DMIC0 Beep_Active 0,-6,-12,-18dB Analog Beep_Dig mute Analog Beep mute DMIC1 vol Detect/Convert Analog PC_BEEP vol 0,-6,-12,-18dB +0/+10/+20/+30 dB Digital Microphone volume and mute is done after the ADC but shown here and in widget list as same as analog path. DMIC_0 Boost DMIC DMIC_0 DMIC_1 Boost DMIC DMIC_1 (shared) Pin 4 +0/+10/+20/+30 dB Pin 46 Figure 19. Functional Block Diagram TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 53 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 5. WIDGET DIAGRAM NID = 14h DAC1 MUTE VOLUME BIAS Port A -95.25 to 0dB 0.75dB step NID = 0Bh DAC0 DAC1 MixerOutVol DAC1 HP Port B D - Nodes are Digital Capable VOLUME Mute ADC0 LO Port A IN VOL 10/20/30 VSW NID = 17h NID = 15h NID = 0Ah DAC0 DAC1 MixerOutVol NID = 22h DAC0 MUTE DAC0 -95.25 to 0dB 0.75dB step VOLUME NID = 13h NID = 0Ch DAC0 DAC1 MixerOutVol Mixer Port A LO Port C IN VOL 10/20/30 Port C ADC0 MUX Port E Port F -16 to 30dB 1dB step BIAS Port C NID = 0Dh DAC0 DAC1 MixerOutVol DMIC0 DMIC1 BTL Port D ADC0 MUX EQ NID = 18h ADC1 Mixer Port C ADC1 MUX NID = 19h NID = 1Ah NID = 10h Mono Mux Mono Mix Mono LO Port E Port F -16 to 30dB 1dB step HDA Link DAC0 DAC1 MixerOutVol Port A DMIC0 DMIC1 ADC1 MUX Mixer MixerOutVol MixerOutVol Mute Volume -46.5 to 0dB in 1.5dB steps Port E Mute Volume DAC0 Mute Volume DAC1 Mute Volume Port A Mute Volume Port C Mute Volume Port E Mute Volume Port F -34.5 to +12dB in 1.5dB steps Mixer LO Port E IN VOL 10/20/30 NID = 1Bh NID = 1Ch NID = 0Eh DAC0 DAC1 MixerOutVol NID = 0Fh DAC0 DAC1 MixerOutVol LO Port F IN VOL 10/20/30 Port F NID = 11h DMIC0 Analog* VOL VOLUME Mute NID = 16h DMIC0 10/20/30 NID = 21h NID = 1Dh D Vendor Specific Test SPDIF OUT0 To all ports enabled as an output ADC0 MUX ADC1 MUX Digital NID = 1Eh D Vendor Specific Test SPDIF OUT1 ADC0 MUX ADC1 MUX To all ports enabled as an output VSV Digital PC_BEEP Mute Volume PC_BEEP (Pin 12) 0,-6,-12,-18dB NID = 1Fh Dig0Pin D DMIC1 Analog* VOL NID = 12h Digital NID = 20h DMIC1 VOL (VSW) Dig1Pin 10/20/30 D Digital Figure 20. Widget Diagram TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 54 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 6. PORT AND PIN CONFIGURATIONS 6.1. Port Configurations Mobile Dock Side B HP E HP A MIC/HP F MIC Digital Mic Array SPDIF_OUT Internal HDMI/Display Port A M P A M P D M *EAPD External Desktop 1 Desktop 2 Rear Front Rear Front F LI B HP F LI B E LO C MIC,LI E LO A A MIC C MIC HDMI/Display Port HP MIC,LI,HP HDMI/Display Port SPDIF_OUT SPDIF_OUT Figure 21. Port Configurations TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 55 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 6.2. Pin Configuration Default Register Settings The following table shows the Pin Widget Configuration Default settings. Desktop implementation with 2 jacks in front and 3 jacks in rear. The internal speaker is redirected from the front (green) headphone jack. An internal microphone is present. Pin Name Port Location Device Connection Color Misc PortAPin Connect to Jack 00b Mainboard Front 2h Mic In Ah 1/8 inch Jack 1h Pink 9h Jack Detect Override=0 2h 0h PortBPin Connect to Jack 00b Mainboard Front 2h HP Out 2h 1/8 inch Jack 1h Green 4h Jack Detect Override=0 1h Fh PortCPin Connect to Jack 00b Mainboard Rear 1h Mic In Ah 1/8 inch Jack 1h Pink 9h Jack Detect Override=0 2h 1h PortDPin Internal 10b NA 010000b Speaker 1h Other Analog Unknown Jack Detect 7h 0h Override=1 1h 0h PortEPin Connect to Jack 00b Mainboard Rear 1h Line Out 0h 1/8 inch Jack 1h Green 4h Jack Detect Override=0 5h 0h PortFPin Connect to Jack 00b Mainboard Rear 1h Line In 8h 1/8 inch Jack 1h Blue 3h Jack Detect Override=0 2h Eh MonoOutPin No Connect 01b NA 000000b Other Fh Unknown 0h Unknown Jack Detect 0h Override=0 Fh 0h DigOutPin0 Connect to Jack 00b Mainboard Rear 000001b SPDIF Out 4h optical 5h Jack Detect Override=1 6h 0h DigOutPin1 Connect to Jack 10b Internal 011000b Digital Other Out 5h Other Digital Unknown Jack Detect 6h 0h Override=1 7h 0h DigMic0Pin Internal 10b Internal 010000b Mic In Ah 3h 0h ATAPI 3h Black 1h Unknown Jack Detect 0h Override=1 Assoc. Seq Table 27. Pin Configuration Default Settings TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 56 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7. WIDGET INFORMATION Bits [39:32] Bits [31:28] BITS [27:20] BITS[19:16] BITS [15:0] Reserved CODEC Address NID Verb ID (4-bit) Payload Data (16-bit) Table 28. Command Format for Verb with 4-bit Identifier Bits [39:32] Bits [31:28] BITS [27:20] BITS[19:8] BITS [7:0] Reserved CODEC Address NID Verb ID (12-bit) Payload Data (8-bit) Table 29. Command Format for Verb with 12-bit Identifier There are two types of responses: Solicited and Unsolicited. Solicited responses are provided as a direct response to an issued command and will be provided in the frame immediately following the command. Unsolicited responses are provided by the CODEC independent of any command. Unsolicited responses are the result of CODEC events such as a jack insertion detection. The formats for Solicited Responses and Unsolicited Responses are shown in the tables below. The "Tag" field in bits [31:28] of the Unsolicited Response identify the event. Bit [35] Bit [34] BITS [33:32] BITS[31:0] Valid (Valid = 1) UnSol = 0 Reserved Response Table 30. Solicited Response Format Bit [35] Bit [34] BITS [33:32] BITS[31:28] BITS [27:0] Valid (Valid = 1) UnSol = 1 Reserved Tag Response Table 31. Unsolicited Response Format TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 57 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.1. Widget List ID Widget Name Description 00h Root Root Node 01h AFG Audio Function Group 0Ah Port A Port A Pin Widget (Headphone, Line IN/OUT, MIC) 0Bh Port B Port B Pin Widget (Cap-less Headphone) 0Ch Port C Port C Pin Widget (Line IN/OUT, MIC) 0Dh Port D Port D Pin Widget (Class-D BTL output) 0Eh Port E Port E Pin Widget (Line IN/OUT, MIC) 0Fh Port F Port F Pin Widget (Line IN/OUT, MIC) 10h MonoOut MonoOut Pin Widget (Output Only) 11h DigMic0 Digital Microphone 0 Pin Widget 12h DigMic1 Vol Vendor Specific Widget - D-Mic1 volume (D pin to A mux connection) 13h DAC0 Stereo Output Converter to DAC 14h DAC1 Stereo Output Converter to DAC 15h ADC0 Stereo Input Converter to ADC 16h ADC1 Stereo Input Converter to ADC 17h ADC0Mux ADC0 Mux with volume and mute 18h ADC1Mux ADC1 Mux with volume and mute 19h Mono_Mux Mono output source select 1Ah Mono_Mix Stereo to mono conversion 1Bh Mixer Input Mixer (Input Ports, DACs, Analog PC_Beep) 1Ch MixerOutVol Volume control for analog mixer 1Dh SPDIFOut0 Stereo Output for SPDIF_Out 1Eh SPDIFOut1 Second Stereo Output for SPDIF_Out 1Fh Dig0Pin First Digital Output Pin (pin48) 20h Dig1Pin Second Digital Output Pin / DMIC Input Pin (pin 46) 21h PCBeep Digital PC Beep 22h VSW Vendor Defined Widget Table 32. Widget List TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 58 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.2. Reset Key Abbreviation Description POR Power On Reset. SAFG Single AFG Reset - One single write to the Reset Verb in the AFG Node. DAFG Double AFG Reset - Two consecutive Single AFG Resets with only idle frames (if any) and no Link Resets between. S&DAFG Single And Double AFG Reset - Either one will cause reset. LR Link Reset - Level sensitive reset anytime the HDA Reset is set low. ELR Exiting Link Reset - Edge sensitive reset any time the HDA Reset transitions from low to high. ULR Unexpected Link Reset - Level sensitive reset anytime the HDA Reset is set low when the ClkStopOK indicator is currently set to 0. PS Power State Change - Reset anytime the Actual Power State changes for the Widget in question. 7.3. Root (NID = 00h): VendorID Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0000h Field Name Bits R/W Default Reset Vendor 31:16 R 111Dh N/A R see below N/A R see below N/A Vendor ID. DeviceFix 15:8 Device ID. DeviceProg 7:0 Device ID. Device 92HD91 Device ID 76E0h TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 59 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.3.1. Reg Root (NID = 00h): RevID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0002h Field Name Bits R/W Default Reset Rsvd 31:24 R 00h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. Major 23:20 Major rev number of compliant HD Audio spec. Minor 19:16 R 0h N/A (Hard-coded) Minor rev number of compliant HD Audio spec. RevisionFix 15:12 R xh N/A (Hard-coded) Vendor's rev number for this device. RevisionProg 11:8 R xh N/A (Hard-coded) Vendor's rev number for this device. SteppingFix 7:4 R xh N/A (Hard-coded) Vendor stepping number within the Vendor RevID. SteppingProg 3:0 R xh N/A (Hard-coded) Vendor stepping number within the Vendor RevID. 7.3.2. Reg Root (NID = 00h): NodeInfo Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0004h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 60 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset StartNID 23:16 R 01h N/A (Hard-coded) Starting node number (NID) of first function group Rsvd1 15:8 R 00h N/A (Hard-coded) R 01h N/A (Hard-coded) Reserved. TotalNodes 7:0 Total number of nodes 7.4. AFG (NID = 01h): NodeInfo Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0004h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 0Ah N/A (Hard-coded) Reserved. StartNID 23:16 Starting node number for function group subordinate nodes. Rsvd1 15:8 R 00h N/A (Hard-coded) R 19h N/A (Hard-coded) Reserved. TotalNodes 7:0 Total number of nodes. 7.4.1. Reg AFG (NID = 01h): FGType Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0005h 61 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:9 R 000000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. UnSol 8 Unsolicited response supported: 1 = yes, 0 = no. NodeType 7:0 R 1h N/A (Hard-coded) Function group type: 00h = Reserved 01h = Audio Function Group 02h = Vendor Defined Modem Function Group 03h-7Fh = Reserved 80h-FFh = Vendor Defined Function Group 7.4.2. Reg AFG (NID = 01h): AFGCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0008h Field Name Bits R/W Default Reset Rsvd3 31:17 R 00h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. BeepGen 16 Beep generator present: 1 = yes, 0 = no. Rsvd2 15:12 R 0h N/A (Hard-coded) R Dh N/A (Hard-coded) Reserved. InputDelay 11:8 Typical latency in frames. Number of samples between when the sample is received as an analog signal at the pin and when the digital representation is transmitted on the HD Audio link. Rsvd1 7:4 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 62 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset OutputDelay 3:0 R Dh N/A (Hard-coded) Typical latency in frames. Number of samples between when the signal is received from the HD Audio link and when it appears as an analog signal at the pin. 7.4.3. Reg AFG (NID = 01h): PCMCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ah Field Name Bits R/W Default Reset Rsvd2 31:21 R 000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. B32 20 32 bit audio format support: 1 = yes, 0 = no. B24 19 R 1h N/A (Hard-coded) 24 bit audio format support: 1 = yes, 0 = no. B20 18 R 1h N/A (Hard-coded) 20 bit audio format support: 1 = yes, 0 = no. B16 17 R 1h N/A (Hard-coded) 16 bit audio format support: 1 = yes, 0 = no. B8 16 R 0h N/A (Hard-coded) 8 bit audio format support: 1 = yes, 0 = no. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. R12 11 384kHz rate support: 1 = yes, 0 = no. R11 10 R 1h N/A (Hard-coded) 192kHz rate support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 63 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset R10 9 R 0h N/A (Hard-coded) 176.4kHz rate support: 1 = yes, 0 = no. R9 8 R 1h N/A (Hard-coded) 96kHz rate support: 1 = yes, 0 = no. R8 7 R 1h N/A (Hard-coded) 88.2kHz rate support: 1 = yes, 0 = no. R7 6 R 1h N/A (Hard-coded) 48kHz rate support: 1 = yes, 0 = no. R6 5 R 1h N/A (Hard-coded) 44.1kHz rate support: 1 = yes, 0 = no. R5 4 R 0h N/A (Hard-coded) 32kHz rate support: 1 = yes, 0 = no. R4 3 R 0h N/A (Hard-coded) 22.05kHz rate support: 1 = yes, 0 = no. R3 2 R 0h N/A (Hard-coded) 16kHz rate support: 1 = yes, 0 = no. R2 1 R 0h N/A (Hard-coded) 11.025kHz rate support: 1 = yes, 0 = no. R1 0 R 0h N/A (Hard-coded) 8kHz rate support: 1 = yes, 0 = no. 7.4.4. Reg AFG (NID = 01h): StreamCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Bh 64 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:3 R 00000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. AC3 2 AC-3 formatted data support: 1 = yes, 0 = no. Float32 1 R 0h N/A (Hard-coded) Float32 formatted data support: 1 = yes, 0 = no. PCM 0 R 1h N/A (Hard-coded) PCM-formatted data support: 1 = yes, 0 = no. 7.4.5. Reg AFG (NID = 01h): InAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Dh Field Name Bits R/W Default Reset Mute 31 R 0h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 27h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 03h N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 65 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Offset 6:0 R 00h N/A (Hard-coded) Indicates which step is 0dB 7.4.6. Reg AFG (NID = 01h): PwrStateCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Fh Field Name Bits R/W Default Reset EPSS 31 R 1h N/A (Hard-coded) Extended power states support: 1 = yes, 0 = no. ClkStop 30 R 1h N/A (Hard-coded) D3 clock stop support: 1 = yes, 0 = no. S3D3ColdSup 29 R 1h N/A (Hard-coded) Codec state intended during system S3 state: 1 = D3Hot, 0 = D3Cold. Rsvd 28:5 R 000000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. D3ColdSup 4 D3Cold power state support: 1 = yes, 0 = no. D3Sup 3 R 1h N/A (Hard-coded) D3 power state support: 1 = yes, 0 = no. D2Sup 2 R 1h N/A (Hard-coded) D2 power state support: 1 = yes, 0 = no. D1Sup 1 R 1h N/A (Hard-coded) D1 power state support: 1 = yes, 0 = no. D0Sup 0 R 1h N/A (Hard-coded) D0 power state support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 66 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.7. Reg AFG (NID = 01h): GPIOCnt Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0011h Field Name Bits R/W Default Reset GPIWake 31 R 1h N/A (Hard-coded) Wake capability. Assuming the Wake Enable Mask controls are enabled, GPIO's configured as inputs can cause a wake (generate a Status Change event on the link) when there is a change in level on the pin. GPIUnsol 30 R 1h N/A (Hard-coded) GPIO unsolicited response support: 1 = yes, 0 = no. Rsvd 29:24 R 00h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. NumGPIs 23:16 Number of GPI pins supported by function group. NumGPOs 15:8 R 00h N/A (Hard-coded) Number of GPO pins supported by function group. NumGPIOs 7:0 R 05h N/A (Hard-coded) Number of GPIO pins supported by function group. 7.4.8. Reg AFG (NID = 01h): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 67 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd3 30:23 R 00h N/A (Hard-coded) R 02h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 7Fh N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 7Fh N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.4.9. Reg AFG (NID = 01h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd3 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Function Group have been reset. Cleared by PwrState 'Get' to this Widget. ClkStopOK 9 R 1h POR - DAFG - ULR Bit clock can currently be removed: 1 = yes, 0 = no. Error 8 R 0h POR - DAFG - ULR Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 68 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 7 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 6:4 Actual power state of this widget. Rsvd1 3 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 2:0 Current power state setting for this widget. 7.4.10. Reg AFG (NID = 01h): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable: 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.4.11. Reg AFG (NID = 01h): GPIO Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 715h F1500h 69 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Data4 4 Data for GPIO4. If this GPIO bit is configured as Sticky (edge-sensitive) input, it can be cleared by writing "0". For details of read back value, refer to HD Audio spec. section 7.3.3.22 Data3 3 RW 0h POR - DAFG - ULR Data for GPIO3. If this GPIO bit is configured as Sticky (edge-sensitive) input, it can be cleared by writing "0". For details of read back value, refer to HD Audio spec. section 7.3.3.22 Data2 2 RW 0h POR - DAFG - ULR Data for GPIO2. If this GPIO bit is configured as Sticky (edge-sensitive) input, it can be cleared by writing "0". For details of read back value, refer to HD Audio spec. section 7.3.3.22 Data1 1 RW 0h POR - DAFG - ULR Data for GPIO1. If this GPIO bit is configured as Sticky (edge-sensitive) input, it can be cleared by writing "0". For details of read back value, refer to HD Audio spec. section 7.3.3.22 Data0 0 RW 0h POR - DAFG - ULR Data for GPIO0. If this GPIO bit is configured as Sticky (edge-sensitive) input, it can be cleared by writing "0". For details of read back value, refer to HD Audio spec. section 7.3.3.22 7.4.12. Reg AFG (NID = 01h): GPIOEn Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 716h Get F1600h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 70 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Mask4 4 RW 0h POR - DAFG - ULR Enable for GPIO4: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior determined by GPIO Direction control Mask3 3 RW 0h POR - DAFG - ULR Enable for GPIO3: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior determined by GPIO Direction control Mask2 2 RW 0h POR - DAFG - ULR Enable for GPIO2: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior determined by GPIO Direction control Mask1 1 RW 0h POR - DAFG - ULR Enable for GPIO1: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior determined by GPIO Direction control Mask0 0 RW 0h POR - DAFG - ULR Enable for GPIO0: 0 = pin is disabled (Hi-Z state); 1 = pin is enabled; behavior determined by GPIO Direction control 7.4.13. Reg AFG (NID = 01h): GPIODir Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 717h Get F1700h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Control4 4 Direction control for GPIO4: 0 = GPIO is configured as input; 1 = GPIO is configured as output Control3 3 RW 0h POR - DAFG - ULR Direction control for GPIO3: 0 = GPIO is configured as input; 1 = GPIO is configured as output TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 71 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Control2 2 RW 0h POR - DAFG - ULR Direction control for GPIO2: 0 = GPIO is configured as input; 1 = GPIO is configured as output Control1 1 RW 0h POR - DAFG - ULR Direction control for GPIO1: 0 = GPIO is configured as input; 1 = GPIO is configured as output Control0 0 RW 0h POR - DAFG - ULR Direction control for GPIO0: 0 = GPIO is configured as input; 1 = GPIO is configured as output 7.4.14. Reg AFG (NID = 01h): GPIOWakeEn Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 718h Get F1800h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. W4 4 Wake enable for GPIO4: 0 = wake-up event is disabled; 1 = When HD Audio link is powered down (RST# is asserted), a wake-up event will trigger a Status Change Request event on the link. W3 3 RW 0h POR - DAFG - ULR Wake enable for GPIO3: 0 = wake-up event is disabled; 1 = When HD Audio link is powered down (RST# is asserted), a wake-up event will trigger a Status Change Request event on the link. W2 2 RW 0h POR - DAFG - ULR Wake enable for GPIO2: 0 = wake-up event is disabled; 1 = When HD Audio link is powered down (RST# is asserted), a wake-up event will trigger a Status Change Request event on the link. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 72 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset W1 1 RW 0h POR - DAFG - ULR Wake enable for GPIO1: 0 = wake-up event is disabled; 1 = When HD Audio link is powered down (RST# is asserted), a wake-up event will trigger a Status Change Request event on the link. W0 0 RW 0h POR - DAFG - ULR Wake enable for GPIO0: 0 = wake-up event is disabled; 1 = When HD Audio link is powered down (RST# is asserted), a wake-up event will trigger a Status Change Request event on the link. 7.4.15. Reg AFG (NID = 01h): GPIOUnsol Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 719h Get F1900h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. EnMask4 4 Unsolicited enable mask for GPIO4. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when GPIO2 is configured as input and changes state. EnMask3 3 RW 0h POR - DAFG - ULR Unsolicited enable mask for GPIO3. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when GPIO2 is configured as input and changes state. EnMask2 2 RW 0h POR - DAFG - ULR Unsolicited enable mask for GPIO2. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when GPIO2 is configured as input and changes state. EnMask1 1 RW 0h POR - DAFG - ULR Unsolicited enable mask for GPIO1. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when GPIO1 is configured as input and changes state. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 73 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset EnMask0 0 RW 0h POR - DAFG - ULR Unsolicited enable mask for GPIO0. If set, and the Unsolicited Response control for this widget has been enabled, an unsolicited response will be sent when GPIO0 is configured as input and changes state. 7.4.16. Reg AFG (NID = 01h): GPIOSticky Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Ah Get F1A00h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mask4 4 GPIO4 input type (when configured as input): 0 = Non-Sticky (level-sensitive); 1 = Sticky (edge-sensitive). Mask3 3 RW 0h POR - DAFG - ULR GPIO3 input type (when configured as input): 0 = Non-Sticky (level-sensitive); 1 = Sticky (edge-sensitive). Mask2 2 RW 0h POR - DAFG - ULR GPIO2 input type (when configured as input): 0 = Non-Sticky (level-sensitive); 1 = Sticky (edge-sensitive). Mask1 1 RW 0h POR - DAFG - ULR GPIO1 input type (when configured as input): 0 = Non-Sticky (level-sensitive); 1 = Sticky (edge-sensitive). Mask0 0 RW 0h POR - DAFG - ULR GPIO0 input type (when configured as input): 0 = Non-Sticky (level-sensitive); 1 = Sticky (edge-sensitive). 7.4.17. AFG (NID = 01h): SubID Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 723h 722h 721h 720h TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 74 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.17. Reg AFG (NID = 01h): SubID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Get Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) F2300h / F2200h / F2100h / F2000h Field Name Bits R/W Default Reset Subsys3 31:24 RW 00h POR 00h POR 01h POR 00h POR Subsystem ID (byte 3) Subsys2 23:16 RW Subsystem ID (byte 2) Subsys1 15:8 RW Subsystem ID (byte 1) Assembly 7:0 RW Assembly ID (Not applicable to codec vendors). 7.4.18. Reg AFG (NID = 01h): GPIOPlrty Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 770h Get F7000h Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. GP4 4 GPIO4 Polarity: If configured as output or non-sticky input: 0 = inverting 1 = non-inverting If configured as sticky input: 0 = falling edges will be detected 1 = rising edges will be detected TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 75 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset GP3 3 RW 1h POR - DAFG - ULR GPIO3 Polarity: If configured as output or non-sticky input: 0 = inverting 1 = non-inverting If configured as sticky input: 0 = falling edges will be detected 1 = rising edges will be detected GP2 2 RW 1h POR - DAFG - ULR GPIO2 Polarity: If configured as output or non-sticky input: 0 = inverting 1 = non-inverting If configured as sticky input: 0 = falling edges will be detected 1 = rising edges will be detected GP1 1 RW 1h POR - DAFG - ULR GPIO1 Polarity: If configured as output or non-sticky input: 0 = inverting 1 = non-inverting If configured as sticky input: 0 = falling edges will be detected 1 = rising edges will be detected GP0 0 RW 1h POR - DAFG - ULR GPIO0 Polarity: If configured as output or non-sticky input: 0 = inverting 1 = non-inverting If configured as sticky input: 0 = falling edges will be detected 1 = rising edges will be detected 7.4.19. Reg AFG (NID = 01h): GPIODrive Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 771h F7100h 76 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:5 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OD4 4 GPIO4 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float for 1). OD3 3 RW 0h POR - DAFG - ULR GPIO3 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float for 1). OD2 2 RW 0h POR - DAFG - ULR GPIO2 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float for 1). OD1 1 RW 0h POR - DAFG - ULR GPIO1 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open drain (drive 0, float for 1). OD0 0 RW 0h POR - DAFG - ULR GPIO0 Drive Mode: 0 = push-pull (drive 0 and 1); 1 = open-drain (drive 0, float for 1). 7.4.20. Reg AFG (NID = 01h): DMic Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 778h Get F7800h Field Name Bits R/W Default Reset Rsvd 31:6 R 0000000h N/A (Hard-coded) RW 0h POR Reserved. Mono1 5 DMic1 mono select: 0 = stereo operation, 1 = mono operation (left channel duplicated to the right channel). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 77 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Mono0 4 RW 0h POR DMic0 mono select: 0 = stereo operation, 1 = mono operation (left channel duplicated to the right channel). PhAdj 3:2 RW 0h POR Selects what phase of the DMic clock the data should be latched: 0h = left data rising edge/right data falling edge 1h = left data center of high/right data center of low 2h = left data falling edge/right data rising edge 3h = left data center of low/right data center of high Rate 1:0 RW 2h POR Selects the DMic clock rate: 0h = 4.704MHz 1h = 3.528MHz 2h = 2.352MHz 3h = 1.176MHz. 7.4.21. Reg AFG (NID = 01h): DACMode Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 780h Get F8000h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR Reserved. SwapEn 8 Internal DAC left channel and right channel swap. 0h = not swap, 1h = swap. SDMSettleDisable 7 RW 0h POR SDM wait-to-settle disable: 1 = at mute, the SDM switches to the mute pattern immediately 0 = at mute, the SDM switches to the mute pattern after settling (can take up to ~45ms) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 78 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SDMCoeffSel 6 RW 0h POR DAC SDM coefficient select (stages 1, 2, 3): 1 = 1/16, 1/2, 1/4 0 = 1/16, 1/4, 1/2 SDMLFHalf 5 RW 0h POR DAC SDM local feedback coefficient select: 1 = 1/4096, 0 = 1/2048. SDMLFDisable 4 RW 0h POR DAC SDM local feedback disable: 1 = local feedback disabled, 0 = local feedback enabled. InvertValid 3 RW 0h POR DAC Valid Invert: 1 = 7.056MHz valid strobe is inverted, 0 = 7.056MHz valid strobe is not inverted. InvertData 2 RW 0h POR DAC Data Invert: 1 = 1-bit outputs are inverted, 0 = 1-bit outputs are not inverted. Atten6dBDisable 1 RW 1h POR Disable built-in -6dB digital attenuation: 1 = -6dB disabled, 0 = -6dB enabled. Fade 0 RW 1h POR DAC Gain Fade Enable: 1 = gain will be slowly faded from old value to new value (~10ms) 0 = gain will jump immediately to new value. 7.4.22. Reg AFG (NID = 01h): ADCMode Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 784h Get F8400h Field Name Bits R/W Default Reset Rsvd2 31:4 R 0000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 79 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset InvertValid 3 RW 0h POR ADC Valid Invert: 1 = 14.112MHz valid strobe is inverted, 0 = 14.112MHz valid strobe is not inverted. InvertData 2 RW 0h POR ADC Data Invert: 1 = 1-bit inputs are inverted, 0 = 1-bit inputs are not inverted. ADCClkDelay 1 RW 0h POR 0h POR Delay ADC clock. DACClkDelay 0 RW Delay DAC clock. 7.4.23. Reg AFG (NID = 01h): PortUse Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 7C0h Get FC000h Field Name Bits R/W Default Reset Rsvd 31:7 R 0000000h N/A (Hard-coded) RW 1h POR Reserved. Mono 6 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable PortF 5 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable PortE 4 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable PortD 3 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 80 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset PortC 2 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable PortB 1 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable PortA 0 RW 1h POR 1=power down port if not input or output enabled, 0=do not force power down based on input or output enable. 7.4.24. Reg AFG (NID = 01h): ComJack Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7C7h 7C6h Set Get FC700h/FC600h Field Name Bits R/W Default Reset Rsvd3 31:14 R 00000000h N/A (Hard-coded) RW 1h POR Reserved. DebounceTime 13:12 Combo Jack debounce time set. 2'h0 = 0.1ms; 2'h1 = 125ms; 2'h2 = 500ms; 2'h3 = 1s." Rsvd2 11 R oh N/A (Hard-coded) RW 4h POR Reserved. RbCon 10:8 Combo jack detection reference voltage 000 = 0.18*AVDD 001 = 0.16*AVDD 010 = 0.14*AVDD 011 = 0.12*AVDD 100 = 0.10*AVDD 101 = 0.08*AVDD 110 = 0.06*AVDD 111 = 0.04*AVDD TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 81 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset MasterPort 7:5 RW 0h POR Port tied to the jack presence detection switch 000 = Port A 001 = Port B 010 = Port C 011 = Port D 100 = Port E 101 = Port F Rsvd1 4 R 0h N/A (Hard-coded) RW 0h POR Reserved. SlavePort 3:1 Port used as microphone input When combo jack detection is enabled, Port presence detection as shown in the pin complex is not sensed directly by the sense input but is inferred by the load placed on the Vref_Output associated with the port 000 = Port A 001 = Port B 010 = Port C 011 = Port D;100 = Port E 101 = Port F Det-en 0 R 0h POR 0h = disable combo jact detection 1h = enable combo jact detection 7.4.25. Reg AFG (NID = 01h): VSPwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 7D8h Get FD800h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 82 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset D5 1 RW 0h POR - ELR Vendor specific D5 power state, only entered once the part is already in D3cold (this bit must be set before the command to enter D3cold). If set, this bit overrides the D4 bit (bit 0). Includes the power savings of D4, but additionally powers down GPIO pins, the VAG amp, and the HP amps. Exits this power state via POR or rising edge of Link Reset. D4 0 RW 0h POR - ELR Vendor specific D4 power state, only entered once the part is already in D3cold (this bit must be set before the command to enter D3cold). If the D5 bit (bit 1) is set, this bit is overridden. Includes the power savings of D3cold, but additionally powers down the HDA interface (no responses). Exit this power state via POR or rising edge of Link Reset. 7.4.26. Reg AFG (NID = 01h): AnaPort Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7EDh 7ECh Set Get FEC00h Field Name Bits R/W Default Reset Rsvd2 31:7 R 0000000h N/A (Hard-coded) RW 0h POR 0h POR 0h POR 0h POR 0h POR Reserved. MonoPwd 6 Power down Mono Output. FPwd 5 RW Power down Port F. EPwd 4 RW Power down Port E. DPwd 3 RW Power down Port D. CPwd 2 RW Power down Port C. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 83 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset BPwd 1 RW 0h POR 0h POR Power down Port B. APwd 0 RW Power down Port A. 7.4.27. Reg AFG (NID = 01h): AnaBTL Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7F6h 7F5h 7F4h Set Get FF400h Field Name Bits R/W Default Reset Rsvd6 31:22 R 0h N/A (Hard-coded) RW 0h POR Reserved. SCStableTimeSel 21:22 The programmed time window for short circuit detect. This is available on WB silicon revisions and beyond. Prior silicon revisions, these bits are reserved. TSOverrideHiz 19 RW 0h POR Override Hiz for the BTL amplifier power stage circuit: set to 1 to Hiz, set back to 0 to normal mode TSTestMode 18 RW 0h POR Temp sense test mode select, 0=normal operation, 1=sensor will trip at ambient temperature. TSForcePwd 17 RW 1h POR Temp sense force powerdown select 0=BTL will not be muted and powered down even if it is still overheating when the volume is 0h 1=BTL will be muted and powered down even if it is still overheating when the volume is 0h TSInstantCutMode 16 RW 0h POR Temp sense instant cut mode 0=Two trip points used to smoothly adjust the volume 1=One single trip point used to set volume to wither 0 or max value (TI mode) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 84 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset TSWait 15:12 RW 3h POR Temperature sensing wait time between volume increments 0h = 2ms (polling at 2ms) 1h = 4ms (polling at 4ms) 2h = 8ms (polling at 8ms) 3h = 16ms (polling at 16ms) 4h = 32ms (polling at 16ms) 5h = 64ms (polling at 16ms) 6h = 128ms (polling at 16ms) 7h = 256ms (polling at 16ms) 8h = 512ms (polling at 16ms) 9h = 1.024s (polling at 16ms) Ah = 2.048s (polling at 16ms) Bh = 4.096s (polling at 16ms) Ch = 8.192s (polling at 16ms) Dh = 16.384s (polling at 16ms) Eh = 32.768s (polling at 16ms) Fh = 65.536s (polling at 16ms). TSTripHish 11:9 RW 3h POR Temp sense high trip point setting: 0h = 125 Degrees C 1h =140 Degrees C 2h = 155 Degrees C 3h = 170 Degrees C 4h = 185 C 5h = 200 C 6h = 215 C 7h = Reserved TSOverrideRest 8 RW 0h POR Override reset for the BTL amplifier Temp sense circuit: set to 1 to recalculate, set back to 0 to latch the value TSTripLow 7:5 RW 2h POR Temp sense low trip point setting: 0h = 110 Degrees C 1h = 125 Degrees C 2h = 140 Degrees C 3h = 155 Degrees C 4h = 170 C 5h = 185 C 6h = 200 C 7h = 215 C Rsvd1 4:0 R 0h NA Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 85 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.28. Reg AFG (NID = 01h): AnaBTLStatus Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get FF700h Field Name Bits R/W Default Reset Rsvd 31:20 R 00h N/A (Hard-coded) R 0h POR Reserved. TSTripHigh 19 Temp sense high trip point status TSTripLow 18 R 0h POR Temp sense low trip point status TSMute 17 R 0h POR Temp sense forced mute status for BTL amplifier TSPwd 16 R 0h POR Temp sense forced powerdown status for BTL amplifier TSLeftVol 15:8 R 0h POR Temp sense volume status for the BTL amplifier: 00000000b..11111111b = Range specified for SPKVol field. TSRightVol 7:0 R 0h POR Temp sense volume status for the BTL amplifier: 00000000b..11111111b = Range specified for SPKVol field. 7.4.29. Reg AFG (NID = 01h): AnaCapless Byte 4 (Bits 31:24) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7FAh 7F9h 7F8h FF800h 86 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:26 R 00h N/A (Hard-coded) R 0h POR Reserved. VRegSCDet 25 Capless regulator short circuit detect indicator. ChargePumpSCDet 24 R 0h POR Capless charge pump short circuit detect indicator. VRegSel 23:20 RW 5h POR Capless regulator output voltage multiply ratio Bits [3..2] Reserved Bits [1..0]: 00b = 2*Vbg 01b = 2.1*Vbg 10b = 2.2*Vbg 11b = 2.3*Vbg VRegSCRstB 19 RW 0h POR Capless regulator short circuit detect reset: 0 = short circuit detect disabled, 1 = short circuit detect enabled. VRegGndShort 18 RW 0h POR Ground the capless regulator output. VRegPwd 17 RW 0h POR Capless regulator powerdown. ChargePumpSCRstB 16 RW 0h POR Capless charge pump short circuit detect reset: 0 = short circuit detect disabled, 1 = short circuit detect enabled. ChargePumpHiZ 15 RW 0h POR Hi-Z the capless charge pump outputs. ChargePumpPwd 14 RW 0h POR Capless charge pump powerdown. ChargePumpSplyDetOverride TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 13 RW 0h POR Capless charge pump supply detect override. 87 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ChargePumpFreqBypass 12 RW 1h POR Capless charge pump frequency reg bypass. ChargePumpClkRate 11:8 RW 8h POR Capless charge pump clock rate: 0000b = 800.0kHz (24MHz/30) 0001b = 750.0kHz (24MHz/32) 0010b = 706.9kHz (24MHz/34) 0011b = 666.7kHz (24MHz/36) 0100b = 631.6kHz (24MHz/38) 0101b = 600.0kHz (24MHz/40) 0110b = 571.4kHz (24MHz/42) 0111b = 545.5kHz (24MHz/44) 1000b = 800.0kHz (24MHz/30) 1001b = 857.1kHz (24MHz/28) 1010b = 923.1kHz (24MHz/26) 1011b = 1.000MHz (24MHz/24) 1100b = 1.091MHz (24MHz/22) 1101b = 1.200MHz (24MHz/20) 1110b = 1.333MHz (24MHz/18) 1111b = 1.500MHz (24MHz/16) ChargePumpClkDiv 7:5 RW 4h POR Capless charge pump analog clock divider: 001b = No divide 010b = Divide by 2, 50% duty cycle 100b = Divide by 4, 50% duty cycle 110b = Divide by 2, 75% duty cycle 011b = Divide by 4, 75% duty cycle 111b = Divide by 4, 87.5% duty cycle Other values undefined ChargePumpClkSel 4 RW 0h POR Capless charge pump clock select: 0 = ring oscillator, 1 = charge pump clock defined by AFGCaplessChargePumpClkRate[3:0] field below. PadGnd 3 RW 0h POR Ground the output pad of the capless amplifiers. InputGnd 2 RW 0h POR Ground the input to the capless output amplifiers. Rsvd1 1 R 0h NA Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 88 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset AntiPopBypass 0 RW 0h POR 0 = Enable anti-pop on the capless headphone; 1 = bypass anti-pop on the capless headphone. 7.4.30. Reg AFG (NID = 01h): Reset Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 7FFh Get FFF00h Field Name Bits R/W Default Reset Rsvd1 31:8 R 000000h N/A (Hard-coded) W 00h N/A (Hard-coded) Reserved. Execute 7:0 Function Reset. Function Group reset is executed when the Set verb 7FF is written with 8-bit payload of 00h. The codec should issue a response to acknowledge receipt of the verb, and then reset the affected Function Group and all associated widgets to their power-on reset values. Some controls such as Configuration Default controls should not be reset. Overlaps Response. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 89 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.31. Reg AFG (NID = 01h): DAC3OutAmp (Mono Out Volume) Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 7B6hh Get FB600h Field Name Bits R/W Default Reset Rsvd 31:8 R 0000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted Gain 6:0 RW 7Fh POR - DAFG - ULR Amp gain step number (see OutAmpCap parameter of AFG) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 90 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.32. Reg AFG (NID = 01h): AnaBeep Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7EFh 7EEh Set Get FEE00h / FEE00h Field Name Bits R/W Default Reset Rsvd2 31:14 R 00000h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Detect 13 0: no beep present; 1: beep present. GainAdj 12:10 RW 3h POR Analog PC Beep Gain in digital side 7h = -6dB, 6h = -12dB, 5h = -18dB, 4h = -24dB, 3h = -30dB, 2h = -36dB, 1h = -42dB, 0h = -48dB. ConvertEn 9 RW 1h POR Analog pc beep quantization enable (enabled only when both ""d2a_ana_pc_beep_det_en"" and ""d2a_ana_pc_beep_convert_en"" are 1). DetectEn 8 RW 1h POR Analog pc beep detection enable 0h = disable 1h = enable. Rsvd1 7:6 R 0h N/A (Hard-coded) Gain 5:4 RW 3h POR Analog PC Beep Gain: 0h = -24dB, 1h = -18dB, 2h = -12dB, 3h = -6dB. CntSel 3:2 RW 0h POR Select counter delay.0h=64ms,1h = 128ms, 2h = 256ms, 3h = 512ms. Mode 1:0 RW 2h POR Analog PC Beep Mode: 00b = Always disabled 01b = Always enabled 1Xb = Enabled during HDA Link Reset only TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 91 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.33. Reg AFG (NID = 01h): EAPD Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 788h Get F8800h Field Name Bits R/W Default Reset Rsvd7 31:19 R 00000h N/A (Hard-coded) RW 0h POR Reserved. HPESDInv 18 YA silicon: called AuxSDInv Port E HP Amp Shutdown Invert: 0 = Amp will power down (or mute) when EAPD pin is low 1 = Amp will power down (or mute) when EAPD pin is high HPESDMode 17 RW 1h POR YA silicon and before: Reserved Port E HP Amp Shutdown Mode: 0 = Amp will mute when disabled 1 = Amp will enter a low power state when disabled HPESD 16 RW 0h POR YA silicon and before: Reserved Port E HP Amp Shutdown Control Select: 0 = Amp controlled by EAPD pin only 1 = Amp controlled by power state only Rsvd4 15 R 0 N/A (Hard-coded) RW 0h POR Reserved. HPBSDInv 14 Port B HP Amp Shutdown Invert: 0 = Amp will power down (or mute) when EAPD pin is low 1 = Amp will power down (or mute) when EAPD pin is high HPBSDMode 13 RW 1h POR Port B HP Amp Shutdown Mode: 0 = Amp will mute when disabled 1 = Amp will enter a low power state when disabled TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 92 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset HPBSD 12 RW 0h POR Port B HP Amp Shutdown Control Select: 0 = Amp controlled by EAPD pin only 1 = Amp controlled by power state only Rsvd3 11 R 0h N/A (Hard-coded) RW 0h POR Reserved. HPASDInv 10 Port A HP Amp Shutdown Invert: 0 = Amp will power down (or mute) when EAPD pin is low 1 = Amp will power down (or mute) when EAPD pin is high HPASDMode 9 RW 1h POR Port A HP Amp Shutdown Mode: 0 = Amp will mute when disabled 1 = Amp will enter a low power state when disabled HPASD 8 RW 0h POR Port A HP Amp Shutdown Control Select: 0 = Amp controlled by EAPD pin only 1 = Amp controlled by power state only Rsvd2 7 R 0h N/A (Hard-coded) RW 0h POR Reserved. BTLSDInv 6 BTL Amp Shutdown Invert: 0 = Amp will power down (or mute) when EAPD pin is low 1 = Amp will power down (or mute) when EAPD pin is high BTLSDMode 5 RW 1h POR BTL Amp Shutdown Mode: 0 = Amp will mute when disabled 1 = Amp will enter a low power state when disabled BTLSD 4 RW 0h POR BTL Amp Shutdown Control Select: 0 = Amp controlled by EAPD pin only 1 = Amp controlled by power state only Rsvd1 3:2 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 93 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset PinMode 1:0 RW 0h POR EAPD Pin Mode: 00b = Open Drain I/O (Value at pin is wired-AND of EAPD bit & external signal) 01b = CMOS Output (Value of EAPD bit is forced at pin) 1xb = CMOS Input (External signal controls internal amps, EAPD bit ignored) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 94 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.4.34. Reg AFG (NID = 01h): ComboJackTime (Available only on WB revision and beyond) Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) 7CAh 7C9h Set Get FCA00h/FC900h Field Name Bits R/W Default Reset Rsvd3 31:16 R 0000000h N/A (Hard-coded) RW 0h POR Reserved. bouncertimer_bypass 15 0 = all the combjack debounce time in normal; 1= all the comjack debounce time in simulation mode(debounce time is short). t_delay_slave_port_usr 14:12 RW 3h POR 7h POR 000 = 2frame 001 =4frame 010 =8frame 011 =16frame 100 = 32frame 101 =64frame 110 = 128frame 111 = 256frame t_stable 11:8 RW 0000 = 0.1ms 0001 =0.5ms 0010 =1ms 0011 =2ms 0100 = 4ms 0101 =8ms 0110 = 16ms 0111 = 32ms 1000 = 64ms 1001 =128ms;1010 =256ms;1011 =512ms 1100 = 1024ms 1101 =1024ms 1110 = 1024ms 1111 = 1024ms RSVD2 7 R 0h N/A (Hard-coded) Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 95 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset t_long_realtime_detect 6:4 RW 5h POR R 0h N/A (Hard-coded) RW 3h POR 000 = 2s 001 =4s 010 =8s 011 =16s 100 = 32s 101 =64s 110 = 128s 111 = infinite RSVD1 3 Reserved t_delay_verfout 2:0 000 = 0.1ms 001 =50ms 010 = 125ms 011 =250ms 100 = 500ms 101 = 1s 110 = 2s 111 = 4s TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 96 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.5. PortA (NID = 0Ah): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 97 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.5.1. Reg PortA (NID = 0Ah): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 98 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 17h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 1h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.5.2. Reg PortA (NID = 0Ah): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 99 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. 7.5.3. Reg PortA (NID = 0Ah): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) DAC2 Converter widget (0x22) ConL2 23:16 R 1Ch N/A (Hard-coded) MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.5.4. Reg PortA (NID = 0Ah): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 100 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.5.5. Reg PortA (NID = 0Ah): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.5.6. Reg PortA (NID = 0Ah): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 101 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.5.7. Reg PortA (NID = 0Ah): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.5.8. Reg PortA (NID = 0Ah): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 707h F0700h 102 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. HPhnEn 7 Headphone amp enable: 1 = enabled, 0 = disabled. OutEn 6 RW 0h POR - DAFG - ULR Output enable: 1 = enabled, 0 = disabled. InEn 5 RW 0h POR - DAFG - ULR Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:3 R 0h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. VRefEn 2:0 Vref selection (See VrefCntrl field of PinCap parameter for supported selections): 000b= HI-Z 001b= 50% 010b= GND 011b= Reserved 100b= 80% 101b= 100% 110b= Reserved 111b= Reserved 7.5.9. Reg PortA (NID = 0Ah): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 103 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset En 7 RW 0h POR - DAFG - ULR Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.5.10. Reg PortA (NID = 0Ah): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 709h Get F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.5.11. Reg PortA (NID = 0Ah): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 104 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset EAPD 1 RW 1h POR - DAFG - ULR EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.5.12. PortA (NID = 0Ah): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 02h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 105 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW Ah POR 1h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 106 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 9h POR 0h POR 2h POR Fh POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. 7.6. PortB (NID = 0Bh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 107 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Type 23:20 R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 108 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.6.1. Reg PortB (NID = 0Bh): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 109 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset BalancedIO 6 R 0h N/A (Hard-coded) Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 0h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 1h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.6.2. Reg PortB (NID = 0Bh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 110 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.6.3. Reg PortB (NID = 0Bh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) DAC2 Converter widget (0x22) ConL2 23:16 R 1Ch N/A (Hard-coded) MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.6.4. Reg PortB (NID = 0Bh): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. 7.6.5. Reg PortB (NID = 0Bh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 111 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.6.6. Reg PortB (NID = 0Bh): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. HPhnEn 7 Headphone amp enable: 1 = enabled, 0 = disabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 112 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset OutEn 6 RW 0h POR - DAFG - ULR Output enable: 1 = enabled, 0 = disabled. Rsvd1 5:0 RW 00h N/A (Hard-coded) Reserved. 7.6.7. Reg PortB (NID = 0Bh): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.6.8. Reg PortB (NID = 0Bh): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 709h F0900h 113 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.6.9. Reg PortB (NID = 0Bh): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. EAPD 1 EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.6.10. PortB (NID = 0Bh): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F1F00h / F1E00h / F1D00h / F1C00h 114 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 02h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved Device 23:20 RW 2h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 115 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConnectionType 19:16 RW 1h POR Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other Color 15:12 RW 4h POR 0h POR 1h POR Fh POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 116 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.7. PortC (NID = 0Ch): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 117 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.7.1. Reg PortC (NID = 0Ch): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 118 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 17h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.7.2. Reg PortC (NID = 0Ch): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 119 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. 7.7.3. Reg PortC (NID = 0Ch): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) R 1Ch N/A (Hard-coded) Reserved ConL2 23:16 MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.7.4. Reg PortC (NID = 0Ch): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 120 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.7.5. Reg PortC (NID = 0Ch): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.7.6. Reg PortC (NID = 0Ch): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 121 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.7.7. Reg PortC (NID = 0Ch): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.7.8. Reg PortC (NID = 0Ch): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 707h F0700h 122 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:7 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. InEn 5 RW 0h POR - DAFG - ULR Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:3 R 0h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. VRefEn 2:0 Vref selection (See VrefCntrl field of PinCap parameter for supported selections): 000b= HI-Z 001b= 50% 010b= GND 011b= Reserved 100b= 80% 101b= 100% 110b= Reserved 111b= Reserved 7.7.9. Reg PortC (NID = 0Ch): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 123 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.7.10. Reg PortC (NID = 0Ch): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 709h Get F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.7.11. Reg PortC (NID = 0Ch): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. EAPD 1 EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 124 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.7.12. PortC (NID = 0Ch): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 01h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 125 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW Ah POR 1h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 126 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 9h POR 0h POR 2h POR 1h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 127 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.8. PortD (NID = 0Dh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 128 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.8.1. Reg PortD (NID = 0Dh): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 129 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 0h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 0h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.8.2. Reg PortD (NID = 0Dh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 130 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. 7.8.3. Reg PortD (NID = 0Dh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) R 1Ch N/A (Hard-coded) Reserved ConL2 23:16 MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.8.4. Reg PortD (NID = 0Dh): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 701h F0100h 131 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. 7.8.5. Reg PortD (NID = 0Dh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 132 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.8.6. Reg PortD (NID = 0Dh): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:7 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. Rsvd1 5:0 R 0h N/A (Hard-coded) Reserved. 7.8.7. Reg PortD (NID = 0Dh): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. EAPD 1 EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.8.8. PortD (NID = 0Dh): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 133 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.8.8. Reg PortD (NID = 0Dh): ConfigDefault Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Get Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 2h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 10h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 134 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW 1h POR 7h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 135 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 0h POR 1h POR 1h POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 136 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.9. PortE (NID = 0Eh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 137 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.9.1. Reg PortE (NID = 0Eh): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 138 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 1h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.9.2. Reg PortE (NID = 0Eh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 139 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. 7.9.3. Reg PortE (NID = 0Eh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) DAC2 Converter widget (0x22) ConL2 23:16 R 1Ch N/A (Hard-coded) MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.9.4. Reg PortE (NID = 0Eh): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 140 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.9.5. Reg PortE (NID = 0Eh): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.9.6. Reg PortE (NID = 0Eh): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 141 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.9.7. Reg PortE (NID = 0Eh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.9.8. Reg PortE (NID = 0Eh): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 707h F0700h 142 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:7 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. InEn 5 R 0h N/A (Hard-coded) Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:0 R 0h N/A (Hard-coded) Reserved. 7.9.9. Reg PortE (NID = 0Eh): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.9.10. Reg PortE (NID = 0Eh): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 709h 143 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.9.10. Reg PortE (NID = 0Eh): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Get Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.9.11. Reg PortE (NID = 0Eh): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. EAPD 1 EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.9.12. PortE (NID = 0Eh): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F1F00h / F1E00h / F1D00h / F1C00h 144 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 01h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved Device 23:20 RW 0h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 145 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConnectionType 19:16 RW 1h POR Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other Color 15:12 RW 4h POR 0h POR 5h POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 146 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.10. PortF (NID = 0Fh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 147 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.10.1. Reg PortF (NID = 0Fh): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 148 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 0h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.10.2. Reg PortF (NID = 0Fh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 149 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. 7.10.3. Reg PortF (NID = 0Fh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) R 1Ch N/A (Hard-coded) Reserved ConL2 23:16 MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.10.4. Reg PortF (NID = 0Fh): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 150 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.10.5. Reg PortF (NID = 0Fh): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.10.6. Reg PortF (NID = 0Fh): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 151 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.10.7. Reg PortF (NID = 0Fh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.10.8. Reg PortF (NID = 0Fh): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 707h F0700h 152 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:7 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. InEn 5 RW 0h POR - DAFG - ULR Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:3 R 0h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. VRefEn 2:0 Vref selection (See VrefCntrl field of PinCap parameter for supported selections): 000b= HI-Z 001b= 50% 010b= GND 011b= Reserved 100b= 80% 101b= 100% 110b= Reserved 111b= Reserved 7.10.9. Reg PortF (NID = 0Fh): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 153 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.10.10. PortF (NID = 0Fh): ChSense Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 709h Get F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.10.11. PortF (NID = 0Fh): EAPDBTLLR Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:2 R 00000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. EAPD 1 EAPD control: 1 = set EAPD pin to 1 (powered) up if this pin is powered up, 0 = set EAPD pin to 0. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 154 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 0 R 0h N/A (Hard-coded) Reserved. 7.10.12. PortF (NID = 0Fh): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 01h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 155 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW 8h POR 1h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 156 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 3h POR 0h POR 2h POR Eh POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 157 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.11. MonoOut (NID = 10h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 158 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 0h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.11.1. Reg MonoOut (NID = 10h): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 159 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 0h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 0h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.11.2. Reg MonoOut (NID = 10h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 160 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. 7.11.3. Reg MonoOut (NID = 10h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 1Ah N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R MonoMix Summing widget (0x1A) 7.11.4. Reg MonoOut (NID = 10h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 161 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.11.5. Reg MonoOut (NID = 10h): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:7 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 162 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 5:0 R 0h N/A (Hard-coded) Reserved. 7.11.6. MonoOut (NID = 10h): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 1h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 00h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 163 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW Fh POR 0h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 164 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 0h POR 0h POR Fh POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 165 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.12. DMic0 (NID = 11h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. DigitalStrm 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnsolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 166 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.12.1. Reg DMic0 (NID = 11h): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 167 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset VRefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 0h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HPhnDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.12.2. Reg DMic0 (NID = 11h): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 168 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.12.3. Reg DMic0 (NID = 11h): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.12.4. Reg DMic0 (NID = 11h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 169 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.12.5. Reg DMic0 (NID = 11h): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:6 R 0000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. InEn 5 Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:0 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 170 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.12.6. Reg DMic0 (NID = 11h): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.12.7. Reg DMic0 (NID = 11h): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 709h Get F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 171 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.12.8. DMic0 (NID = 11h): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 2h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 10h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 172 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW Ah POR 3h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 173 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 0h POR 1h POR 3h POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 174 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.13. DMic1Vol (NID = 12h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R Fh N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. DigitalStrm 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnsolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 175 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.13.1. Reg DMic1Vol (NID = 12h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 176 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.13.2. Reg DMic1Vol (NID = 12h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 20h N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R Dig1Pin Pin widget (0x20) 7.13.3. Reg DMic1Vol (NID = 12h): InAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 360h Get B2000h Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.13.4. Reg DMic1Vol (NID = 12h): InAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 350h B0000h 177 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 31:2 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.13.5. Reg DMic1Vol (NID = 12h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 178 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.14. DAC0 (NID = 13h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 0h N/A (Hard-coded) Dh N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 179 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.14.1. Reg DAC0 (NID = 13h): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. StrmType 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 180 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Reserved. BitsPerSmpl 6:4 Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.14.2. Reg DAC0 (NID = 13h): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 3A0h BA000h 181 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Gain 6:0 RW 7Fh POR - DAFG - ULR Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.14.3. Reg DAC0 (NID = 13h): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 390h Get B8000h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Gain 6:0 RW 7Fh POR - DAFG - ULR Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.14.4. Reg DAC0 (NID = 13h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 182 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SettingsReset 10 R 1h POR - DAFG - ULR Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.14.5. Reg DAC0 (NID = 13h): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 183 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.14.6. Reg DAC0 (NID = 13h): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. SwapEn 2 Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled. Rsvd1 1:0 R 0h N/A (Hard-coded) Reserved. 7.15. DAC1 (NID = 14h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 184 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Delay 19:16 R Dh N/A (Hard-coded) Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 185 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.15.1. Reg DAC1 (NID = 14h): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. StrmType 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 186 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset BitsPerSmpl 6:4 RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.15.2. Reg DAC1 (NID = 14h): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 3A0h Get BA000h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Gain 6:0 RW 7Fh POR - DAFG - ULR Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.15.3. Reg DAC1 (NID = 14h): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 390h B8000h 187 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Gain 6:0 RW 7Fh POR - DAFG - ULR Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.15.4. Reg DAC1 (NID = 14h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 188 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Set 1:0 RW 3h POR - DAFG - LR Current power state setting for this widget. 7.15.5. Reg DAC1 (NID = 14h): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). 7.15.6. Reg DAC1 (NID = 14h): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. SwapEn 2 Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled. Rsvd1 1:0 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 189 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.16. ADC0 (NID = 15h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 1h N/A (Hard-coded) Dh N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 190 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 1h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.16.1. Reg ADC0 (NID = 15h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 191 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.16.2. Reg ADC0 (NID = 15h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 20h N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R ADC0Mux Selector widget (0x17) 7.16.3. Reg ADC0 (NID = 15h): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. StrmType 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 192 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Reserved. BitsPerSmpl 6:4 Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.16.4. Reg ADC0 (NID = 15h): ProcState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 703h F0300h 193 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. HPFOCDIS 7 HPF offset calculation disable. 1 = calculation disabled; 0 = calculation enabled. Rsvd1 6:2 R 00h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. ADCHPFByp 1:0 Processing State: 00b= bypass the ADC HPF ("off"), 01b-11b= ADC HPF is enabled ("on" or "benign"). 7.16.5. Reg ADC0 (NID = 15h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 194 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Act 5:4 R 3h POR - DAFG - LR Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.16.6. Reg ADC0 (NID = 15h): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). 7.17. ADC1 (NID = 1Bh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0009h 195 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 1h N/A (Hard-coded) Dh N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 1h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 196 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.17.1. Reg ADC1 (NID = 1Bh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. 7.17.2. Reg ADC1 (NID = 1Bh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0200h 197 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 18h N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R ADC1Mux widget (0x18) 7.17.3. Reg ADC1 (NID = 1Bh): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. StrmType 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 198 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Reserved. BitsPerSmpl 6:4 Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.17.4. Reg ADC1 (NID = 1Bh): ProcState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 703h Get F0300h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. HPFOCDIS 7 HPF offset calculation disable. 1 = calculation disabled; 0 = calculation enabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 199 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 6:2 R 00h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. ADCHPFByp 1:0 Processing State: 00b= bypass the ADC HPF ("off"), 01b-11b= ADC HPF is enabled ("on" or "benign"). 7.17.5. Reg ADC1 (NID = 1Bh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 200 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.17.6. Reg ADC1 (NID = 1Bh): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 201 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.18. ADC0Mux (NID = 17h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 3h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. DigitalStrm 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 202 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset UnsolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParamOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.18.1. Reg ADC0Mux (NID = 17h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 203 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset LForm 7 R 0h N/A (Hard-coded) Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 07`h N/A (Hard-coded) Number of NID entries in connection list. 7.18.2. Reg ADC0Mux (NID = 17h): ConLstEntry4 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0204h Field Name Bits R/W Default Reset ConL7 31:24 R 00h N/A (Hard-coded) 12h N/A (Hard-coded) 11h N/A (Hard-coded) 0Fh N/A (Hard-coded) Unused list entry. ConL6 23:16 R DMIC1 widget (0x12) ConL5 15:8 R DMIC0 widget (0x11) ConL4 7:0 R Port F widget (0x0F) 7.18.3. Reg ADC0Mux (NID = 17h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0200h 204 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConL3 31:24 R 0Eh N/A (Hard-coded) 0Ch N/A (Hard-coded) 0Ah N/A (Hard-coded) 1Bh N/A (Hard-coded) Port E Pin widget (0x0E) ConL2 23:16 R Port C Pin widget (0x0C) ConL1 15:8 R Port A Pin widget (0x0A) ConL0 7:0 R Mixer Summing widget (0x1B) 7.18.4. Reg ADC0Mux (NID = 17h): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 03h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 2Eh N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 205 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 7 R 0h N/A (Hard-coded) R 10h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.18.5. Reg ADC0Mux (NID = 17h): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 3A0h Get BA000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6 R 0h N/A (Hard-coded) RW 10h POR - DAFG - ULR Reserved. Gain 5:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.18.6. Reg ADC0Mux (NID = 17h): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 390h B8000h 206 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6 R 0h N/A (Hard-coded) RW 10h POR - DAFG - ULR Reserved. Gain 5:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.18.7. Reg ADC0Mux (NID = 17h): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 2:0 Connection select control index. 7.18.8. Reg ADC0Mux (NID = 17h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 207 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.18.9. Reg ADC0Mux (NID = 17h): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 70Ch F0C00h 208 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. SwapEn 2 Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled. Rsvd1 1:0 R 0h N/A (Hard-coded) Reserved. 7.19. ADC1Mux (NID = 18h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 3h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 209 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 15:12 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. DigitalStrm 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnsolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParamOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 210 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.19.1. Reg ADC1Mux (NID = 18h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 07h N/A (Hard-coded) Number of NID entries in connection list. 7.19.2. Reg ADC1Mux (NID = 18h): ConLstEntry4 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0204h Field Name Bits R/W Default Reset ConL7 31:24 R 00h N/A (Hard-coded) 12h N/A (Hard-coded) 11h N/A (Hard-coded) 0Fh N/A (Hard-coded) Unused list entry. ConL6 23:16 R DMIC1 widget (0x12h) ConL5 15:8 R DMIC0 widget (0x11) ConL4 7:0 R Port F Pin widget (0x0F) TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 211 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.19.3. Reg ADC1Mux (NID = 18h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 1Eh N/A (Hard-coded) 0Ch N/A (Hard-coded) 0Ah N/A (Hard-coded) 1Bh N/A (Hard-coded) Port E Pin widget (0x1E) ConL2 23:16 R Port C Pin widget (0x10) ConL1 15:8 R Port A Pin widget (0x0A) ConL0 7:0 R Mixer Summing widget (0x1B) 7.19.4. Reg ADC1Mux (NID = 18h): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 03h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 212 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset NumSteps 14:8 R 2Eh N/A (Hard-coded) Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 10h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.19.5. Reg ADC1Mux (NID = 18h): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 3A0h Get BA000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6 R 0h N/A (Hard-coded) RW 10h POR - DAFG - ULR Reserved. Gain 5:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.19.6. Reg ADC1Mux (NID = 18h): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 390h B8000h 213 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6 R 0h N/A (Hard-coded) RW 10h POR - DAFG - ULR Reserved. Gain 5:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.19.7. Reg ADC1Mux (NID = 18h): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 2:0 Connection select control index. 7.19.8. Reg ADC1Mux (NID = 18h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 214 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SettingsReset 10 R 1h POR - DAFG - ULR Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.19.9. Reg ADC1Mux (NID = 18h): EAPDBTLLR Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ch Get F0C00h Field Name Bits R/W Default Reset Rsvd2 31:3 R 00000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. SwapEn 2 Swap enable: 1 = L/R swap enabled, 0 = L/R swap disabled. Rsvd1 1:0 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 215 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.20. MonoMux (NID = 19h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 3h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 216 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.20.1. Reg MonoMux (NID = 19h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 03h N/A (Hard-coded) Number of NID entries in connection list. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 217 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.20.2. Reg MonoMux (NID = 19h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) DAC2 Converter widget (0x22) ConL2 23:16 R 1Ch N/A (Hard-coded) MixerOutVol Selector widget (0x1C) ConL1 15:8 R 14h N/A (Hard-coded) DAC1 Converter widget (0x14) ConL0 7:0 R 13h N/A (Hard-coded) DAC0 Converter widget (0x13) 7.20.3. Reg MonoMux (NID = 19h): ConSelectCtrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 701h Get F0100h Field Name Bits R/W Default Reset Rsvd 31:2 R 0000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Index 1:0 Connection select control index. 7.20.4. Reg MonoMux (NID = 19h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 218 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.21. MonoMix (NID = 1Ah): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 219 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Type 23:20 R 2h N/A (Hard-coded) 0h N/A (Hard-coded) Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 220 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 0h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.21.1. Reg MonoMix (NID = 1Ah): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. 7.21.2. Reg MonoMix (NID = 1Ah): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0200h 221 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 19h N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R MonoMux Selector widget (0x19) 7.21.3. Reg MonoMix (NID = 1Ah): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 222 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 223 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.22. Mixer (NID = 1Bh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 2h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 224 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 1h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.22.1. Reg Mixer (NID = 1Bh): InAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Dh Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 05h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 225 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 15 R 0h N/A (Hard-coded) R 1Fh N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 17h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.22.2. Reg Mixer (NID = 1Bh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 06h N/A (Hard-coded) Number of NID entries in connection list. 7.22.3. Reg Mixer (NID = 1Bh): ConLstEntry4 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0204h 226 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConL7 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 0Fh N/A (Hard-coded) 0Eh N/A (Hard-coded) Unused list entry. ConL6 23:16 R Unused list entry. ConL5 15:8 R Port F Pin Widget (0x0F) ConL4 7:0 R Port E Pin Widget (0x0E). 7.22.4. Reg Mixer (NID = 1Bh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 0Ch N/A (Hard-coded) Port C Pin widget (0x0C). Uses InAmpLeft3/InAmpRight3 controls. ConL2 23:16 R 0Ah N/A (Hard-coded) Port A Pin widget (0x0A). Uses InAmpLeft2/InAmpRight2 controls. ConL1 15:8 R 14h N/A (Hard-coded) DAC1 widget (0x14). Uses InAmpLeft1/InAmpRight1 controls. ConL0 7:0 R 13h N/A (Hard-coded) DAC0 widget (0x13). Uses InAmpLeft0/InAmpRight0 controls. 7.22.5. Reg Mixer (NID = 1Bh): InAmpLeft0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 360h B2000h 227 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.6. Reg Mixer (NID = 1Bh): InAmpRight0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 350h Get B0000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.7. Reg Mixer (NID = 1Bh): InAmpLeft1 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 361h B2001h 228 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.8. Reg Mixer (NID = 1Bh): InAmpRight1 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 351h Get B0001h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.9. Reg Mixer (NID = 1Bh): InAmpLeft2 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 362h B2002h 229 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.10. Mixer (NID = 1Bh): InAmpRight2 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 352h Get B0002h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.11. Mixer (NID = 1Bh): InAmpLeft3 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 363h B2003h 230 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.12. Mixer (NID = 1Bh): InAmpRight3 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 353h Get B0003h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.13. Mixer (NID = 1Bh): InAmpLeft4 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 364h B2004h 231 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.14. Mixer (NID = 1Bh): InAmpRight4 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 354h Get B0004h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.15. Mixer (NID = 1Bh): InAmpLeft5 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 365h B2005h 232 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.16. Mixer (NID = 1Bh): InAmpRight5 Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 355h Get B0005h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 17h POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see InAmpCap parameter pertaining to this widget). 7.22.17. Mixer (NID = 1Bh): PwrState Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 233 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.23. MixerOutVol (NID = 1Ch): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 234 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Type 23:20 R 3h N/A (Hard-coded) 0h N/A (Hard-coded) Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 235 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset AmpParOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.23.1. Reg MixerOutVol (NID = 1Ch): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. 7.23.2. Reg MixerOutVol (NID = 1Ch): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0200h 236 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 1Bh N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R Mixer Summing widget (0x1B) 7.23.3. Reg MixerOutVol (NID = 1Ch): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 05h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 1Fh N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 237 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Offset 6:0 R 1Fh N/A (Hard-coded) Indicates which step is 0dB 7.23.4. Reg MixerOutVol (NID = 1Ch): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 3A0h Get BA000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:5 R 0h N/A (Hard-coded) RW 1Fh POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.23.5. Reg MixerOutVol (NID = 1Ch): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 390h Get B8000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 238 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 6:5 R 0h N/A (Hard-coded) RW 1Fh POR - DAFG - ULR Reserved. Gain 4:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.23.6. Reg MixerOutVol (NID = 1Ch): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 239 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.24. SPDIFOut0 (NID = 1Dh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 0h N/A (Hard-coded) 4h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 1h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 240 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 1h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.24.1. Reg SPDIFOut0 (NID = 1Dh): PCMCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ah Field Name Bits R/W Default Reset Rsvd2 31:21 R 000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. B32 20 32 bit audio format support: 1 = yes, 0 = no. B24 19 R 1h N/A (Hard-coded) 24 bit audio format support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 241 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset B20 18 R 1h N/A (Hard-coded) 20 bit audio format support: 1 = yes, 0 = no. B16 17 R 1h N/A (Hard-coded) 16 bit audio format support: 1 = yes, 0 = no. B8 16 R 0h N/A (Hard-coded) 8 bit audio format support: 1 = yes, 0 = no. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. R12 11 384kHz rate support: 1 = yes, 0 = no. R11 10 R 1h N/A (Hard-coded) 192kHz rate support: 1 = yes, 0 = no. R10 9 R 0h N/A (Hard-coded) 176.4kHz rate support: 1 = yes, 0 = no. R9 8 R 1h N/A (Hard-coded) 96kHz rate support: 1 = yes, 0 = no. R8 7 R 1h N/A (Hard-coded) 88.2kHz rate support: 1 = yes, 0 = no. R7 6 R 1h N/A (Hard-coded) 48kHz rate support: 1 = yes, 0 = no. R6 5 R 1h N/A (Hard-coded) 44.1kHz rate support: 1 = yes, 0 = no. R5 4 R 0h N/A (Hard-coded) 32kHz rate support: 1 = yes, 0 = no. R4 3 R 0h N/A (Hard-coded) 22.05kHz rate support: 1 = yes, 0 = no. R3 2 R 0h N/A (Hard-coded) 16kHz rate support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 242 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset R2 1 R 0h N/A (Hard-coded) 11.025kHz rate support: 1 = yes, 0 = no. R1 0 R 0h N/A (Hard-coded) 8kHz rate support: 1 = yes, 0 = no. 7.24.2. Reg SPDIFOut0 (NID = 1Dh): StreamCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Bh Field Name Bits R/W Default Reset Rsvd 31:3 R 00000000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. AC3 2 AC-3 formatted data support: 1 = yes, 0 = no. Float32 1 R 0h N/A (Hard-coded) Float32 formatted data support: 1 = yes, 0 = no. PCM 0 R 1h N/A (Hard-coded) PCM-formatted data support: 1 = yes, 0 = no. 7.24.3. Reg SPDIFOut0 (NID = 1Dh): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 243 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd3 30:23 R 00h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.24.4. Reg SPDIFOut0 (NID = 1Dh): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. FrmtNonPCM 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 244 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Reserved. BitsPerSmpl 6:4 Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.24.5. Reg SPDIFOut0 (NID = 1Dh): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 3A0h BA000h 245 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:0 R 00h N/A (Hard-coded) Reserved. 7.24.6. Reg SPDIFOut0 (NID = 1Dh): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 390h Get B8000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:0 R 00h N/A (Hard-coded) Reserved. 7.24.7. Reg SPDIFOut0 (NID = 1Dh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 246 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SettingsReset 10 R 1h POR - DAFG - ULR Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.24.8. Reg SPDIFOut0 (NID = 1Dh): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 247 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.24.9. SPDIFOut0 (NID = 1Dh): DigCnvtr Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 73Fh 73Eh 70Eh 70Dh Get F0E00h / F0D00h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. KeepAlive 23 Keep Alive Enable: 1 = clocking information maintained during D3, 0 = clock information not required during D3. Rsvd1 22:15 R 00h N/A (Hard-coded) RW 00h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR Reserved. CC 14:8 CC: Category Code. L 7 RW L: Generation Level. PRO 6 RW PRO: Professional. AUDIO 5 RW /AUDIO: Non-Audio. COPY 4 RW COPY: Copyright. PRE 3 RW PRE: Preemphasis. VCFG 2 RW VCFG: Validity Config. V 1 RW V: Validity. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 248 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset DigEn 0 RW 0h POR - DAFG - ULR Digital enable: 1 = converter enabled, 0 = converter disable. 7.25. SPDIFOut1 (NID = 1Eh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 0h N/A (Hard-coded) 4h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 1h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 249 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 1h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 1h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.25.1. Reg SPDIFOut1 (NID = 1Eh): PCMCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ah Field Name Bits R/W Default Reset Rsvd2 31:21 R 000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 250 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset B32 20 R 0h N/A (Hard-coded) 32 bit audio format support: 1 = yes, 0 = no. B24 19 R 1h N/A (Hard-coded) 24 bit audio format support: 1 = yes, 0 = no. B20 18 R 1h N/A (Hard-coded) 20 bit audio format support: 1 = yes, 0 = no. B16 17 R 1h N/A (Hard-coded) 16 bit audio format support: 1 = yes, 0 = no. B8 16 R 0h N/A (Hard-coded) 8 bit audio format support: 1 = yes, 0 = no. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. R12 11 384kHz rate support: 1 = yes, 0 = no. R11 10 R 1h N/A (Hard-coded) 192kHz rate support: 1 = yes, 0 = no. R10 9 R 0h N/A (Hard-coded) 176.4kHz rate support: 1 = yes, 0 = no. R9 8 R 1h N/A (Hard-coded) 96kHz rate support: 1 = yes, 0 = no. R8 7 R 1h N/A (Hard-coded) 88.2kHz rate support: 1 = yes, 0 = no. R7 6 R 1h N/A (Hard-coded) 48kHz rate support: 1 = yes, 0 = no. R6 5 R 1h N/A (Hard-coded) 44.1kHz rate support: 1 = yes, 0 = no. R5 4 R 0h N/A (Hard-coded) 32kHz rate support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 251 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset R4 3 R 0h N/A (Hard-coded) 22.05kHz rate support: 1 = yes, 0 = no. R3 2 R 0h N/A (Hard-coded) 16kHz rate support: 1 = yes, 0 = no. R2 1 R 0h N/A (Hard-coded) 11.025kHz rate support: 1 = yes, 0 = no. R1 0 R 0h N/A (Hard-coded) 8kHz rate support: 1 = yes, 0 = no. 7.25.2. Reg SPDIFOut1 (NID = 1Eh): StreamCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Bh Field Name Bits R/W Default Reset Rsvd 31:3 R 00000000h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. AC3 2 AC-3 formatted data support: 1 = yes, 0 = no. Float32 1 R 0h N/A (Hard-coded) Float32 formatted data support: 1 = yes, 0 = no. PCM 0 R 1h N/A (Hard-coded) PCM-formatted data support: 1 = yes, 0 = no. 7.25.3. Reg SPDIFOut1 (NID = 1Eh): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F0012h 252 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 00h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.25.4. Reg SPDIFOut1 (NID = 1Eh): Cnvtr Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 2h Get A0000h Field Name Bits R/W Default Reset Rsvd2 31:16 R 0000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. FrmtNonPCM 15 Stream type: 1 = Non-PCM, 0 = PCM. FrmtSmplRate 14 RW 0h POR - DAFG - ULR Sample base rate: 1 = 44.1kHz, 0 = 48kHz. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 253 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SmplRateMultp 13:11 RW 0h POR - DAFG - ULR Sample base rate multiple: 000b= x1 (48kHz/44.1kHz or less) 001b= x2 (96kHz/88.2kHz/32kHz) 010b= x3 (144kHz) 011b= x4 (192kHz/176.4kHz) 100b-111b Reserved SmplRateDiv 10:8 RW 0h POR - DAFG - ULR Sample base rate divider: 000b= Divide by 1 (48kHz/44.1kHz) 001b= Divide by 2 (24kHz/20.05kHz) 010b= Divide by 3 (16kHz/32kHz) 011b= Divide by 4 (11.025kHz) 100b= Divide by 5 (9.6kHz) 101b= Divide by 6 (8kHz) 110b= Divide by 7 111b= Divide by 8 (6kHz) Rsvd1 7 R 0h N/A (Hard-coded) RW 3h POR - DAFG - ULR 1h POR - DAFG - ULR Reserved. BitsPerSmpl 6:4 Bits per sample: 000b= 8 bits 001b= 16 bits 010b= 20 bits 011b= 24 bits 100b= 32 bits 101b-111b= Reserved NmbrChan 3:0 RW Total number of channels in the stream assigned to this converter: 0000b-1111b= 1-16 channels. 7.25.5. Reg SPDIFOut1 (NID = 1Eh): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 3A0h BA000h 254 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:0 R 00h N/A (Hard-coded) Reserved. 7.25.6. Reg SPDIFOut1 (NID = 1Eh): OutAmpRight Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 390h Get B8000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Mute 7 Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:0 R 00h N/A (Hard-coded) Reserved. 7.25.7. Reg SPDIFOut1 (NID = 1Eh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 255 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset SettingsReset 10 R 1h POR - DAFG - ULR Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 3h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.25.8. Reg SPDIFOut1 (NID = 1Eh): CnvtrID Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 706h Get F0600h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - S&DAFG - LR - PS Reserved. Strm 7:4 Stream ID: 0h = Converter "off", 1h-Fh = valid ID's. Ch 3:0 RW 0h POR - S&DAFG - LR - PS Channel assignment ("Ch" and "Ch+1" assigned as a pair, for a stereo converter). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 256 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.25.9. SPDIFOut1 (NID = 1Eh): DigCnvtr Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 73Fh 73Eh 70Eh 70Dh Get F0E00h / F0D00h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. KeepAlive 23 Keep Alive Enable: 1 = clocking information maintained during D3, 0 = clock information not required during D3. Rsvd1 22:15 R 00h N/A (Hard-coded) RW 00h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR 0h POR - DAFG - ULR Reserved. CC 14:8 CC: Category Code. L 7 RW L: Generation Level. PRO 6 RW PRO: Professional. AUDIO 5 RW /AUDIO: Non-Audio. COPY 4 RW COPY: Copyright. PRE 3 RW PRE: Preemphasis. VCFG 2 RW VCFG: Validity Config. V 1 RW V: Validity. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 257 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset DigEn 0 RW 0h POR - DAFG - ULR Digital enable: 1 = converter enabled, 0 = converter disable. 7.26. Dig0Pin (NID = 1Fh): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 1h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 258 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.26.1. Reg Dig0Pin (NID = 1Fh): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 259 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset EapdCap 16 R 0h N/A (Hard-coded) EAPD support: 1 = yes, 0 = no. VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. BalancedIO 6 Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 0h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.26.2. Reg Dig0Pin (NID = 1Fh): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. F000Eh 260 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. 7.26.3. Reg Dig0Pin (NID = 1Fh): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 1Dh N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R SPDIFOut0 Converter widget (0x1D) 7.26.4. Reg Dig0Pin (NID = 1Fh): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Get TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Byte 1 (Bits 7:0) 705h F0500h 261 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.26.5. Reg Dig0Pin (NID = 1Fh): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:7 R 0000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 262 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd1 5:0 R 00h N/A (Hard-coded) Reserved. 7.26.6. Reg Dig0Pin (NID = 1Fh): UnsolResp Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 708h Get F0800h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. En 7 Unsolicited response enable (also enables Wake events for this Widget): 1 = enabled, 0 = disabled. Rsvd1 6 R 0h N/A (Hard-coded) RW 00h POR - DAFG - ULR Reserved. Tag 5:0 Software programmable field returned in top six bits (31:26) of every Unsolicited Response generated by this node. 7.26.7. Reg Dig0Pin (NID = 1Fh): ChSense Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 709h Get F0900h Field Name Bits R/W Default Reset PresDtct 31 R 0h POR Presence detection indicator: 1 = presence detected; 0 = presence not detected. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 263 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Rsvd 30:0 R 00000000h N/A (Hard-coded) Reserved. 7.26.8. Dig0Pin (NID = 1Fh): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 0h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 1h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 264 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW 4h POR 5h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 265 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 1h POR 1h POR 6h POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. 7.27. Dig1Pin (NID = 20h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 266 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Type 23:20 R 4h N/A (Hard-coded) 0h N/A (Hard-coded) Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 1h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 1h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 1h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 1h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 267 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). 7.27.1. Reg Dig1Pin (NID = 20h): PinCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Ch Field Name Bits R/W Default Reset Rsvd2 31:17 R 0000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. EapdCap 16 EAPD support: 1 = yes, 0 = no. VrefCntrl 15:8 R 00h N/A (Hard-coded) Vref support: bit 7 = Reserved bit 6 = Reserved bit 5 = 100% support (1 = yes, 0 = no) bit 4 = 80% support (1 = yes, 0 = no) bit 3 = Reserved bit 2 = GND support (1 = yes, 0 = no) bit 1 = 50% support (1 = yes, 0 = no) bit 0 = Hi-Z support (1 = yes, 0 = no) Rsvd1 7 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 268 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset BalancedIO 6 R 0h N/A (Hard-coded) Balanced I/O support: 1 = yes, 0 = no. InCap 5 R 1h N/A (Hard-coded) Input support: 1 = yes, 0 = no. OutCap 4 R 1h N/A (Hard-coded) Output support: 1 = yes, 0 = no. HdphDrvCap 3 R 0h N/A (Hard-coded) Headphone amp present: 1 = yes, 0 = no. PresDtctCap 2 R 1h N/A (Hard-coded) Presence detection support: 1 = yes, 0 = no. TrigRqd 1 R 0h N/A (Hard-coded) Trigger required for impedance sense: 1 = yes, 0 = no. ImpSenseCap 0 R 0h N/A (Hard-coded) Impedance sense support: 1 = yes, 0 = no. 7.27.2. Reg Dig1Pin (NID = 20h): ConLst Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F000Eh Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. LForm 7 Connection list format: 1 = long-form (15-bit) NID entries, 0 = short-form (7-bit) NID entries. ConL 6:0 R 01h N/A (Hard-coded) Number of NID entries in connection list. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 269 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.27.3. Reg Dig1Pin (NID = 20h): ConLstEntry0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0200h Field Name Bits R/W Default Reset ConL3 31:24 R 00h N/A (Hard-coded) 00h N/A (Hard-coded) 00h N/A (Hard-coded) 1Eh N/A (Hard-coded) Unused list entry. ConL2 23:16 R Unused list entry. ConL1 15:8 R Unused list entry. ConL0 7:0 R SPDIFOut1 Converter widget (0x1E) 7.27.4. Reg Dig1Pin (NID = 20h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 270 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Error 8 R 0h POR - DAFG - ULR Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) RW 0h POR - DAFG - LR Reserved. Set 1:0 Current power state setting for this widget. 7.27.5. Reg Dig1Pin (NID = 20h): PinWCntrl Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 707h Get F0700h Field Name Bits R/W Default Reset Rsvd2 31:7 R 0000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. OutEn 6 Output enable: 1 = enabled, 0 = disabled. InEn 5 RW 0h POR - DAFG - ULR Input enable: 1 = enabled, 0 = disabled. Rsvd1 4:0 R 00h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 271 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.27.6. Dig1Pin (NID = 20h): ConfigDefault Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 71Fh 71Eh 71Dh 71Ch Get F1F00h / F1E00h / F1D00h / F1C00h Field Name Bits R/W Default Reset PortConnectivity 31:30 RW 2h POR Port connectivity: 0h = Port complex is connected to a jack 1h = No physical connection for port 2h = Fixed function device is attached 3h = Both jack and internal device attached (info in all other fields refers to integrated device, any presence detection refers to jack) Location 29:24 RW 18h POR Location Bits [5..4]: 0h = External on primary chassis 1h = Internal 2h = Separate chassis 3h = Other Bits [3..0]: 0h = N/A 1h = Rear 2h = Front 3h = Left 4h = Right 5h = Top 6h = Bottom 7h-9h = Special Ah-Fh = Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 272 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Device 23:20 RW 5h POR 6h POR Default device: 0h = Line out 1h = Speaker 2h = HP out 3h = CD 4h = SPDIF Out 5h = Digital other out 6h = Modem line side 7h = Modem handset side 8h = Line in 9h = Aux Ah = Mic in Bh = Telephony Ch = SPDIF In Dh = Digital other in Eh = Reserved Fh = Other ConnectionType 19:16 RW Connection type: 0h = Unknown 1h = 1/8" stereo/mono 2h = 1/4" stereo/mono 3h = ATAPI internal 4h = RCA 5h = Optical 6h = Other digital 7h = Other analog 8h = Multichannel analog (DIN) 9h = XLR/Professional Ah = RJ-11 (modem) Bh = Combination Ch-Eh = Reserved Fh = Other TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 273 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Color 15:12 RW 0h POR 1h POR 7h POR 0h POR Color: 0h = Unknown 1h = Black 2h = Grey 3h = Blue 4h = Green 5h = Red 6h = Orange 7h = Yellow 8h = Purple 9h = Pink Ah-Dh = Reserved Eh = White Fh = Other Misc 11:8 RW Miscellaneous: Bits [3..1] = Reserved Bit 0 = Jack detect override Association 7:4 RW Default assocation. Sequence 3:0 RW Sequence. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 274 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.28. DigBeep (NID = 21h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h Field Name Bits R/W Default Reset Rsvd4 31:24 R 00h N/A (Hard-coded) R 7h N/A (Hard-coded) R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Rsvd3 19:11 Reserved. PwrCntrl 10 Power state support: 1 = yes, 0 = no." Rsvd2 9:4 R 0h N/A (Hard-coded) R 1h N/A (Hard-coded) Reserved AmpParOvrd 3 Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 1h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. Rsvd1 1:0 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 275 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.28.1. Reg DigBeep (NID = 21h): OutAmpCap Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0012h Field Name Bits R/W Default Reset Mute 31 R 1h N/A (Hard-coded) Mute support: 1 = yes, 0 = no. Rsvd3 30:23 R 00h N/A (Hard-coded) R 17h N/A (Hard-coded) Reserved. StepSize 22:16 Size of each step in the gain range: 0 to 127 = .25dB to 32dB, in .25dB steps. Rsvd2 15 R 0h N/A (Hard-coded) R 03h N/A (Hard-coded) Reserved. NumSteps 14:8 Number of gains steps (number of possible settings - 1). Rsvd1 7 R 0h N/A (Hard-coded) R 03h N/A (Hard-coded) Reserved. Offset 6:0 Indicates which step is 0dB 7.28.2. Reg DigBeep (NID = 21h): OutAmpLeft Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 3A0h Get BA000h Field Name Bits R/W Default Reset Rsvd2 31:8 R 000000h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 276 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Mute 7 RW 0h POR - DAFG - ULR Amp mute: 1 = muted, 0 = not muted. Rsvd1 6:2 R 00h N/A (Hard-coded) RW 1h POR - DAFG - ULR Reserved. Gain 1:0 Amp gain step number (see OutAmpCap parameter pertaining to this widget). 7.28.3. Reg DigBeep (NID = 21h): PwrState Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 705h Get F0500h Field Name Bits R/W Default Reset Rsvd4 31:11 R 000000h N/A (Hard-coded) R 1h POR - DAFG - ULR Reserved. SettingsReset 10 Indicates if any persistent settings in this Widget have been reset. Cleared by PwrState 'Get', or a 'Set' to any Verb in this Widget. Rsvd3 9 R 0h N/A (Hard-coded) R 0h POR - DAFG - ULR Reserved. Error 8 Error indicator: 1 = cannot enter requested power state, 0 = no problem with requested power state. Rsvd2 7:6 R 0h N/A (Hard-coded) R 3h POR - DAFG - LR Reserved. Act 5:4 Actual power state of this widget. Rsvd1 3:2 R 0h N/A (Hard-coded) Reserved. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 277 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset Set 1:0 RW 0h POR - DAFG - LR Current power state setting for this widget. 7.28.4. Reg DigBeep (NID = 21h): Gen Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 70Ah Get F0A00h Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 00h POR - DAFG - LR Reserved. Divider 7:0 Enable internal PC-Beep generation. Divider == 00h disables internal PC Beep generation and enables normal operation of the codec. Divider != 00h generates the beep tone on all Pin Complexes that are currently configured as outputs. The HD Audio spec states that the beep tone frequency = (48kHz HD Audio SYNC rate) / (4*Divider), producing tones from 47 Hz to 12 kHz (logarithmic scale). 7.28.5. Reg DigBeep (NID = 21h): Gain Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set 77Ah Get F7A00h Field Name Bits R/W Default Reset Rsvd 31:3 R 000000h N/A (Hard-coded) RW 05h POR - DAFG - LR Reserved. Divider 2:0 Digital PC Beep Gain adjust in digital side 0h = -9dB, 1h = -6dB, 2h = -3dB, 3h = 0dB, 4h = +3db, 5h = +6db TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 278 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29. AdvancedFunctions (NID = 22h): WCap Reg Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Byte 1 (Bits 7:0) Set Get F0009h This register is reset by POR Field Name Bits R/W Default Reset Rsvd2 31:24 R 00h N/A (Hard-coded) R Fh N/A (Hard-coded) 0h N/A (Hard-coded) Reserved. Type 23:20 Widget type: 0h = Out Converter 1h = In Converter 2h = Summing (Mixer) 3h = Selector (Mux) 4h = Pin Complex 5h = Power 6h = Volume Knob 7h = Beep Generator 8h-Eh = Reserved Fh = Vendor Defined Delay 19:16 R Number of sample delays through widget. Rsvd1 15:12 R 0h N/A (Hard-coded) R 0h N/A (Hard-coded) Reserved. SwapCap 11 Left/right swap support: 1 = yes, 0 = no. PwrCntrl 10 R 0h N/A (Hard-coded) Power state support: 1 = yes, 0 = no. Dig 9 R 0h N/A (Hard-coded) Digital stream support: 1 = yes (digital), 0 = no (analog). ConnList 8 R 0h N/A (Hard-coded) Connection list present: 1 = yes, 0 = no. UnSolCap 7 R 0h N/A (Hard-coded) Unsolicited response support: 1 = yes, 0 = no. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 279 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Field Name Bits R/W Default Reset ProcWidget 6 R 0h N/A (Hard-coded) Processing state support: 1 = yes, 0 = no. Stripe 5 R 0h N/A (Hard-coded) Striping support: 1 = yes, 0 = no. FormatOvrd 4 R 0h N/A (Hard-coded) Stream format override: 1 = yes, 0 = no. AmpParOvrd 3 R 0h N/A (Hard-coded) Amplifier capabilities override: 1 = yes, no. OutAmpPrsnt 2 R 0h N/A (Hard-coded) Output amp present: 1 = yes, 0 = no. InAmpPrsnt 1 R 0h N/A (Hard-coded) Input amp present: 1 = yes, 0 = no. Stereo 0 R 1h N/A (Hard-coded) Stereo stream support: 1 = yes (stereo), 0 = no (mono). All registers are available when in normal mode through the HD Audio interface. Most are implemented using vendor defined verbs but some (volume controls specifically) are supported through standard verbs at the pin widgets 7.29.1. Reg AdvancedFunctions (NID = 22h): Cntrl0 Byte 4 (Bits 31:24) Byte 3 (Bits 23:16) Byte 2 (Bits 15:8) Set Byte 1 (Bits 7:0) 770h:&7AFh Get F7700h: 7AF0h This register is reset by POR Field Name Bits R/W Default Reset Rsvd 31:8 R 000000h N/A (Hard-coded) RW 0h POR - DAFG - ULR Reserved. Value 7:0 Contrl register value of module TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 280 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.1. SPKVOL L/R Registers Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit verb F71/771 (Left) verb F72/772 (Right) 7:0 verb 773 (Left and Right write only) Label VOL[7:0] 7.29.1.2. Type RW Default Description +36 to -91.5dB in 0.75dB steps 0x00 = +36dB 0x01 = +35.25dB ... 0x2F = +0.75dB 0x30 = 0dB 0x31 = -0.75dB ... 0xA9 = -90.75 0xAA to 0xFE = -91.5dB 0xFF = mute 30 PWRM Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F79/779 Bit Label Type Default Description 7 RSVD RO 0 Reserved 6 RSVD RO 0 Reserved 5 RSVD RO 0 Reserved 4 HPPWD RW 0 Headphone ports are forced off in Aux Audio Mode (including charge pump) 3 SPKRON RW 0 BTL (port D) is forced on in Aux Audio Mode 2 DMICPWD RW 0 DMIC powered down in Aux Audio Mode (including DAC) 1 RSVD RW 0 Reserved 0 RSVD RW 0 Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 281 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.3. Register Address verb F7F/77F RESET Register Bit 7:0 Label RESET 7.29.1.4. Type Default RW Description Writing causes registers to revert to their default values (similar to a function group reset) 0 STATUS Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F80/780 Bit Label Type Default Description 7 limit1latch RO 0 Latched version of limit1, clear via GAINCTRL_LO[7] 6 limit0latch RO 0 Latched version of limit0, clear via GAINCTRL_LO[7] 5:3 Reserved RO 0x0 RESERVED 2 limit1 RO 0 Set (1) if regz saturation after gain multiply for CH1. may change on a sample by sample basis. 1 limit0 RO 0 Set (1) if regz saturation after gain multiply for CH0. may change on a sample by sample basis. 0 zerodet_flag RO 0 Set when input zero detect of long string of zeroes. 7.29.1.5. INIT Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F81/781 Bit Label Type Default Description 7:4 Reserved RO 0 RESERVED 3 anabeep_dcbyp RW 0 1 = bypass analog Beep DC filter 2:1 anabeep_dc_coef RW f 0x2 0: dc_coef = 24'h004000; 1: dc_coef = 24'h001000; 2: dc_coef = 24'h000400; 3: dc_coef = 24'h000100; 0 Initialize 0 1= Initialize/soft reset data path. Must be set when changing the config0 or config1 registers. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. RW 282 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.6. CONFIG Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F82/782 Bit Label Type Default Description 7 BPFBYP RW 0 1= Bypass MonoOut band-pass filer 6 PREBYP RW 1 1= Bypass BTL EQ filter prescale 5 EQBYP RW 1 1= Bypass BTL EQ filter 4 BTL_dcbyp RW 0 1 = bypass BTL DC filter 3:1 Reserved RO 0 RESERVED 0 HPFBYP RW 0 1= Bypass BTL high-pass filter (not DC removal filter) 7.29.1.7. PWM4 Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F83/783 Bit Label Type Default Description 7 sc_status_clear_right RWC 0 Write once operation will clear sc_fault_status_right 6 sc_status_clear_left RWC 0 Write once operation will clear sc_fault_status_left 5 Reserved RO 0 RESERVED 4 sc_Fault_status_right RO 0 1 = Fault occurs on right channel 3 sc_Fault_status_left RO 0 1 = Fault occurs on left channel 2:1 scdly_set RW 00 Used for short circuit detection; designer will set the value 0 evenbit RW 0 1=Noise Shaper output data are even 7.29.1.8. PWM3 Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F84/784 Bit Label Type Default Description 7:6 outctrl RW 0 pwm output muxing 0 = normal 1 = swap 0/1 2 = ch0 on both 3 = ch1 on both 5:0 cvalue RW 0x2 Tristate constant value filed, must be even and not 0 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 283 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.9. PWM2 Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F85/785 Bit Label Type Default Description 7:2 dvalue RW 0x10 dvalue constant field. 1 pwm_outflip RW 0 1= swap pwm a/b output pair for all channels 0 pwm_outmode RW 1 1= tristate, 0 = binary 7.29.1.10. PWM1Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit 7 verb F86/786 Label Reserved Type Default RO Description 0 RESERVED 6:2 dithpos RW 0 Dither position, where dither inserted after NS 0,1,2 = dither bits 2:0 4 = dither bits 3:1 5 = dither bits 4:1 ... 19 = dither bits 19:17 1 dither_range RW 0 1= dither -1 to +1, 0 = dither -3 to +3 0 dithclr RW 0 1 = disable dither 7.29.1.11. PWM0 Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F87/787 Bit Label Type Default Description 7:6 PhaseOffset RW 01 PWM ch1 offset from ch0 at 8x sample rate by: 00 = 0 degrees 01 = 90 degrees 10 = 180 degrees 11 = NA 5 clk320mode R 1 1 = PCA clock 320 mode 0 = PCA clock 294 mode 4 roundup RW 1 1= roundup, 0 = truncate for quantizer 3 bfclr RW 0 1 = disable binomial filter 2 fourthorder RW 0 1 = fourth order binomial filter, 0 = 3rd order binomial filter 1 add3_sel RW 0 1 = 24-bit Noise Shaper output (pre-quantizer), 0 = 8/9/10-bit quantizer output 0 Btl_test_mode RW 0 1 = power stage test mode TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 284 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.12. LMTCTRL Register Control operation of the volume Limiter (Compressor). Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F88/788 Bit Label Type Default Description 7:4 - RO 0 Reserved for future use. 3 zerocross RW 0 1 = only change limiter gain value on zero cross. 2:1 stepsize RW 0 Gain stepsize when incrementing or decrementing: 0 - 0.75 dB, 1 - 1.5 dB, 2 - 3.0 dB, 3 - 6.0 dB 0 limiter_en RW 0 1 = enable limiter (compressor) 7.29.1.13. LMTATKTIME (0x19), LMTHOLDTIME (0x1A), LMTRELTIME (0x1B) Registers These 8-bit registers set the timer values between incrementing/decrementing the Compressor attenuation values. There is one register each for Attack, Hold, and Release times, the configuration parameters are the same for all three and are shown in the table below. Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions.. Register Address verb F89/789 Bit Description ATK10ms RW 0 1 = value in bits 6:0 is in 10ms units, otherwise 1ms units. 6:0 LMTAT[6:0] RW 0 Timer value in units of 1 or 10ms. Type Default Bit Label Description 7 HOLD10ms RW 0 1 = value in bits 6:0 is in 10ms units, otherwise 1ms units. 6:0 LMTHT[6:0] RW 0 Timer value in units of 1 or 10ms. Type Default Register Address verb F8B/78B Type Default 7 Register Address verb F8A/78A Label Bit Label Description 7 REL10ms RW 0 1 = value in bits 6:0 is in 10ms units, otherwise 1ms units. 6:0 LMTRT[6:0] RW 0 Timer value in units of 1 or 10ms. 7.29.1.14. LMTATKTH (0x1D-LO, 0x1C-HI), LMTRELTH (0x1F-LO, 0x1E-HI) Registers These 16-bit registers set the threshold values. When in attack phase and the Attack Threshold is exceeded the Compressor attenuation is incremented by stepsize (see LMTCTRL). When in release phase and the Release Threshold is not exceeded the Compressor attenuation is incremented by stepsize (but not above 0) Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions.. Register Address verb F8C/78C Bit 7:0 Label LATKTH[15:8] TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Type Default RW Description 8'hFF would equal threshold level of +2.0dB. Each step below this 8-bit full scale value reduces threshold level by 0.0078 dB. 7F 285 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Register Address verb F8D/78D Bit 7:0 Register Address verb F8E/78E LATKTH[7:0] Bit 7:0 Register Address verb F8F/78F Label Label LRELTH[15:8] Bit 7:0 Label LRELTH[7:0] Type Default Description Always 0. It isn't necessary to provide threshold resolution to the point where these lower 8 bits would be used. RW FF Type Default RW 0 Type Default RW 0 Description 8'hFF would equal threshold level of +2.0dB. Each step below this 8-bit full scale value reduces threshold level by 0.0078 dB. Description Always 0. It isn't necessary to provide threshold resolution to the point where these lower 8 bits would be used. 7.29.1.15. GAINCTRL_HI Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit 7:5 verb F90/790 Label Reserved Type Default RO Description 0 RESERVED 4:3 zerodetlen RW 0x2 enable mute if input consecutive zeros exceeds this length: 00 = 32 01 = 1000 10 = 2000 11 = 4000 2:0 step_time RW 0x5 step time units = 1<<step_time, units in GAINCTRL_LO bit 5 7.29.1.16. GAINCTRL_LO Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F91/791 Bit Label Type Default Description 7 clr_latch RW 0 1 = clear limit 0/1 latches, see STATUS register 6 RSVD RO 0 Reserved 5 step_10ms RW 0 1 = units for step_time are 10ms 0 = units for step_time are 1ms 4 stepped_change RW 0 1 = step volume progressively to new setting 3 disable_gain RW 0 1 = disable all gain functions (bypass gain multiply) 2 auto_mute RW 1 1 = auto mute if detect long strings of zeros on input 1 change_mode RW 0 1 = change gain immediately 0 = change on zero cross 0 mute_mode RW 1 1 = hard mute after reset, 0 = soft mute TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 286 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.17. MUTE Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F92/792 Bit Label Type Default Description 7:3 Reserved RO 0x0 RESERVED 2 Mute RW 0 1 = mute all channels 1 mute1 RW 0 1 = mute ch1 0 mute0 RW 0 1 = mute ch0 7.29.1.18. ATTEN Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address verb F93/793 Bit 7:0 Label atten Type RW Default Description Attenuation. Each bit represents 0.5dB of attenuation to be applied to the channel. The range will be -125dB to 2dB as follows: 0x00: +2dB 0x01: +1.5dB 0x02: +1.0dB ... 0x47: -33.5dB 0x48: -34.0dB 0x49: -34.5dB ... 0xFE: -125dB 0xFF: Hard Master Mute 0x0 7.29.1.19. DC_COEF_SEL Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit 7:3 verb F94/794 2:0 Label Reserved dc_coef_sel TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Type Default RO 0 RESERVED 0x5 0:dc_coef = 24'h100000; //2^^-3 = 0.125 1:dc_coef = 24'h040000; 2:dc_coef = 24'h010000; 3:dc_coef = 24'h004000; 4:dc_coef = 24'h001000; 5:dc_coef = 24'h000400; 6:dc_coef = 24'h000100; //2^^-15 = 0.000330517 7:dc_coef = 24'h000040; //2^^-17 RW 287 Description V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.20. BTL High-Pass Filter COEF_SEL Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit 7:3 verb F95/795 2:0 Label Reserved hp_coef_sel Type Default RO 0 RESERVED 0x2 Select IIR coefficients for BTL amplifier high pass filter corner frequency 000 = 100Hz 001 = 200Hz 010 = 300Hz 011 = 400Hz 100 = 500Hz 101 = 750Hz 110 = 1000Hz 111 = 2000Hz RW Description 7.29.1.21. Mono Band-Pass Filter COEF_SEL Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause reset on all silicon revisions. Register Address Bit 7 verb F96/796 Label Reserved Type Default RO Description 0 RESERVED 6:4 bph_coef_sel RW 0x3 Select IIR coefficients for MonoOut band-pass filter lower corner frequency 000 = 63Hz 001 = 80Hz 010 = 100Hz 011 = 120Hz 100 = 150Hz 101 = 200Hz 110 = 315Hz 111 = 400Hz 3 Reserved RO 0 RESERVED 0x2 Select IIR coefficients for MonoOut band-pass filter upper corner frequency 000 = 150Hz 001 = 200Hz 010 = 250Hz 011 = 315Hz 100 = 400Hz 101 = 500Hz 110 = 630Hz 111 = 800Hz 2:0 bpl_coef_sel TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. RW 288 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.22. BTL Class-D Power Stage Register Settings Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause NOT generate a reset. Register Address Bit Label Type Default 7 ENABLE RW 1 1 = Enable BTL Power stage 6 TRC_ESD RO 0 1 = ESD trigger detected 0 = No trigger 5 STRENDRV RW 0 1 = Strengthen pre-drive 0 = Normal 01 Short circuit threshold current 00 = 10% of PVDD 01 = 14% of PVDD 10 = 16% of PVDD 11 = 20% of PVDD RW 001 Dead time for output FETs 000 = 0.5ns 001 = 1.0ns 010 = 1.5ns 011 = 2ns 100 = 4ns 101 = 8ns 110 = 8ns 111 = 8ns Type Default 4:3 SCTHR RW verb F97/797 2:0 Register Address verb F98/798 Description DEADTIME Bit Label Description 7 TEST_EN RW 0 1 = Enable short circuit test 6 SC_DIS RW 0 1 = disable short circuit protection 5 RSVD RW 0 Reserved 4 FAULT_SC RO 0 1 = Fault 3 RSVD RW 0 Reserved 2 PNSEL RW 0 1=PFET tested, 0=NFET tested 1 FORCE_SC RW 0 1 = force short circuit 0 TEST RW 0 1 = Pos PFET / Neg NFET on, 0 = Pos NFET / Neg PFET on TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 289 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Register Address Bit Label Type Default 7 ENABLE RW 1 1 = Enable BTL Power stage 6 TRC_ESD RO 0 1 = ESD trigger detected 0 = No trigger 5 STRENDRV RW 0 1 = Strengthen pre-drive 0 = Normal 01 Short circuit threshold current 00 = 10% of PVDD 01 = 14% of PVDD 10 = 16% of PVDD 11 = 20% of PVDD RW 001 Dead time for output FETs 000 = 0.5ns 001 = 1.0ns 010 = 1.5ns 011 = 2ns 100 = 4ns 101 = 8ns 110 = 8ns 111 = 8ns Type Default 4:3 SCTHR RW verb F99/799 2:0 Register Address verb F9A/79A Description DEADTIME Bit Label Description 7 TEST_EN RW 0 1 = Enable short circuit test 6 SC_DIS RW 0 1 = disable short circuit protection 5 RSVD RW 0 Reserved 4 FAULT_SC RO 0 1 = Fault 3 RSVD RW 0 Reserved 2 PNSEL RW 0 1=PFET tested, 0=NFET tested 1 FORCE_SC RW 0 1 = force short circuit 0 TEST RW 0 1 = Pos PFET / Neg NFET on, 0 = Pos NFET / Neg PFET on TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 290 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.23. LDO LEVEL CONTROL Register Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will cause NOT generate a reset. Register Address Bit Label Type Default 7:3 Reserved RO 0x0 2 Lv_QUAD_BIAS RW 0 RESERVED Two bits are defined to program the output of the 1.8V LDO 00 = normal operation (3.3V in to 1.8V out) 01 = 1.8V*1.1 = 1.98V 10 = 1.8V*0.9 = 1.62V 11 = power down LDO/bypass. When disabled, the DVDD_Core pin must be supplied with a nominal 1.8V from an external source. verb F9B/79B 1:0 Lv_reg_cntrl_bit RW Description 0x0 7.29.1.24. EQRAM The EQ RAM is a 52 x 48-bit SRAM that contains the EQ coefficients Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only OR when a BIST is run under certain conditions, contact TSI for more information. Writing to NID22h verb 77F will cause NOT generate a reset.. Address Channel RIGHT Coefficients (24bit) Channel LEFT Coefficients (24bit) EQRAM Bits [47:24] [23:00] based on 44.1Khz sample rate 0x00 EQ_COEF_F0_B0 EQ_COEF_F0_B0 0x01 EQ_COEF_F0_B1 EQ_COEF_F0_B1 0x02 EQ_COEF_F0_B2 EQ_COEF_F0_B2 0x03 EQ_COEF_F0_A1 EQ_COEF_F0_A1 0x04 EQ_COEF_F0_A2 EQ_COEF_F0_A2 0x05 EQ_COEF_F1_B0 EQ_COEF_F1_B0 0x06 EQ_COEF_F1_B1 EQ_COEF_F1_B1 0x07 EQ_COEF_F1_B2 EQ_COEF_F1_B2 0x08 EQ_COEF_F1_A1 EQ_COEF_F1_A1 0x09 EQ_COEF_F1_A2 EQ_COEF_F1_A2 0x0A EQ_COEF_F2_B0 EQ_COEF_F2_B0 0x0B EQ_COEF_F2_B1 EQ_COEF_F2_B1 0x0C EQ_COEF_F2_B2 EQ_COEF_F2_B2 0x0D EQ_COEF_F2_A1 EQ_COEF_F2_A1 0x0E EQ_COEF_F2_A2 EQ_COEF_F2_A2 0x0F EQ_COEF_F3_B0 EQ_COEF_F3_B0 0x10 EQ_COEF_F3_B1 EQ_COEF_F3_B1 0x11 EQ_COEF_F3_B2 EQ_COEF_F3_B2 0x12 EQ_COEF_F3_A1 EQ_COEF_F3_A1 0x13 EQ_COEF_F3_A2 EQ_COEF_F3_A2 0x14 EQ_COEF_F4_B0 EQ_COEF_F4_B0 TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 291 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Address Channel RIGHT Coefficients (24bit) Channel LEFT Coefficients (24bit) EQRAM Bits [47:24] [23:00] 0x15 EQ_COEF_F4_B1 EQ_COEF_F4_B1 0x16 EQ_COEF_F4_B2 EQ_COEF_F4_B2 0x17 EQ_COEF_F4_A1 EQ_COEF_F4_A1 0x18 EQ_COEF_F4_A2 EQ_COEF_F4_A2 0x19 EQ_PRESCALE EQ_PRESCALE 0x1A EQ_COEF_F0_B0 EQ_COEF_F0_B0 0x1B EQ_COEF_F0_B1 EQ_COEF_F0_B1 0x1C EQ_COEF_F0_B2 EQ_COEF_F0_B2 0x1D EQ_COEF_F0_A1 EQ_COEF_F0_A1 0x1E EQ_COEF_F0_A2 EQ_COEF_F0_A2 0x1F EQ_COEF_F1_B0 EQ_COEF_F1_B0 0x20 EQ_COEF_F1_B1 EQ_COEF_F1_B1 0x21 EQ_COEF_F1_B2 EQ_COEF_F1_B2 0x22 EQ_COEF_F1_A1 EQ_COEF_F1_A1 0x23 EQ_COEF_F1_A2 EQ_COEF_F1_A2 0x24 EQ_COEF_F2_B0 EQ_COEF_F2_B0 0x25 EQ_COEF_F2_B1 EQ_COEF_F2_B1 0x26 EQ_COEF_F2_B2 EQ_COEF_F2_B2 0x27 EQ_COEF_F2_A1 EQ_COEF_F2_A1 0x28 EQ_COEF_F2_A2 EQ_COEF_F2_A2 0x29 EQ_COEF_F3_B0 EQ_COEF_F3_B0 0x2A EQ_COEF_F3_B1 EQ_COEF_F3_B1 0x2B EQ_COEF_F3_B2 EQ_COEF_F3_B2 0x2C EQ_COEF_F3_A1 EQ_COEF_F3_A1 0x2D EQ_COEF_F3_A2 EQ_COEF_F3_A2 0x2E EQ_COEF_F4_B0 EQ_COEF_F4_B0 0x2F EQ_COEF_F4_B1 EQ_COEF_F4_B1 0x30 EQ_COEF_F4_B2 EQ_COEF_F4_B2 0x31 EQ_COEF_F4_A1 EQ_COEF_F4_A1 0x32 EQ_COEF_F4_A2 EQ_COEF_F4_A2 0x33 EQ_PRESCALE EQ_PRESCALE based on 48Khz sample rate The EQRAM is programmed indirectly through the Control Bus in the following manner: 1) Write the 48-bit write data to the EQRAM_WRITE register 2) Write the target address to the EQ_ADDRESS register 3) Set bit 7 of the EQRAM_CTRL register The write will occur when the EQRAM is not being accessed by the DSP audio processing routines. When complete the hardware will automatically clear this bit. Reading back from the EQRAM is done in the following manner: 1) Write target address to EQ_ADDR register 2) Set bit 6 of the EQRAM_CTRL register When the hardware completes the read it will automatically clear this bit. 3) When bit 6 of the EQRAM_CTRL register has been cleared, read the 48bit data from the EQRAM_READ register. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 292 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 7.29.1.25. EQRAM Read Data (0x30-0x35), EQRAM Write Data (0x36-3B) Registers These two 48-bit registers (addressed as 12 8-bit registers) are 48-bit data holding registers used when doing indirect writes/reads to the EQRAM Prior to WC revision, these registers reset by POR/DAFG/ULR. WC revision, reset by POR only Writing to NID22h verb 77F will cause NOT generate a reset to EQRAMREAD registers, it will however work for EQRAMWRITE registers.]] Register Address EQRAM_READ[47:40] verb FA0/7A0 Register Address EQRAM_READ[39:32] verb FA1/7A1 Register Address EQRAM_READ[31:24] verb FA2/7A2 Register Address EQRAM_READ[23:16] verb FA3/7A3 Register Address EQRAM_READ[15:8] verb FA4/7A4 Register Address EQRAM_READ[7:0] verb FA5/7A5 Register Address EQRAM_WRITE[47:40] verb FA6/7A6 Register Address EQRAM_WRITE[39:32] verb FA7/7A7 Bit 7:0 Label EQRD[47:40] Bit 7:0 Label EQRD[39:32] Bit 7:0 Label EQRD[31:24] Bit 7:0 Label EQRD[23:16] Bit 7:0 Label EQRD[15:8] Bit 7:0 Label EQRD[7:0] Bit 7:0 Label EQWD[47:40] Bit 7:0 Label EQWD[39:32] TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. Type Default RW 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. 0x00 Type Default RW Description 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. 0x00 Type Default Description 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. RW 0x00 Type Default RW 0x00 Type Default RW 0x00 Description 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. Type Default RW Description 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. 0x00 Type Default RW Description 48-bit data register, contains the contents of the most recent EQRAM address read from the RAM. The address read will have been specified by the EQRAM Address fields. 0x00 Type Default RW Description Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. 0x00 293 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Register Address EQRAM_WRITE[31:24] verb FA8/7A8 Bit 7:0 Register Address EQRAM_WRITE[23:16] verb FA9/7A9 7:0 Label EQWD[23:16] Bit 7:0 Register Address EQRAM_WRITE[7:0] verb FAB/7AB EQWD[31:24] Bit Register Address EQRAM_WRITE[15:8] verb FAA/7AA Label Label EQWD[15:8] Bit 7:0 Label EQWD[7:0] Type RW Type Default Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. 0x00 Default Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. RW 0x00 Type Default RW 0x00 Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. Type Default RW Description 48-bit data register, contains the values to be written to the EQRAM. The address written will have be specified by the EQRAM Address fields. 0x00 7.29.1.26. EQRAM Address Register This 8-bit register provides the address to the internal RAM when doing indirect writes/reads to the EQRAM. Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will generate a reset for all revisions. Register Address Bit 7:6 verb FAC/7AC 5:0 Label RSVD EQADD[5:0] Type Default RO 0x00 Reserved 0x00 Contains the address (between 0x00 and 0x33) of the EQRAM to be accessed by a read or write. This is not a byte address--it is the address of the 48-bit data item to be accessed from the EQRAM. RW Description 7.29.1.27. EQRAM Control Register This control register provides the write/read enable when doing indirect writes/reads to the EQRAM Prior to WC revision, this register reset by POR/DAFG/ULR. WC revision, reset by POR only. Writing to NID22h verb 77F will generate a reset for all revisions. Register Address verb FAD/7AD Bit Label Type Default Description 7 EQRAM_wr RW 0 1 = write to EQRAM, cleared by HW when done 6 EQRAM_rd RW 0 1 = read from EQRAM, cleared by HW when done 5:0 RSVD RO 0 Reserved TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 294 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 1 2 3 4 5 6 7 8 9 10 11 12 48 QFN 36 35 34 33 32 31 30 29 28 27 26 25 Cap+ CapVAVSS2 PORTB_R PORTB_L AVSS2 PORTA_R PORTA_L AVDD1 AVSS1 Mono_Out SENSE_A SENSE_B PORTE_L PORTE_R PORTF_L PORTF_R PORTC_L PORTC_R VrefFilt CAP2 VrefOut_A VrefOut_C/GPIO4 13 14 15 16 17 18 19 20 21 22 23 24 DVDD_CORE** DMIC_CLK/GPIO 1 DVDD_IO DMIC_0/GPIO 2 SDATA_OUT BITCLK DVSS** SDATA_IN DVDD* SYNC RESET# PCBEEP 48 47 46 45 44 43 42 41 40 39 38 37 SPDIF OUT0/GPIO3 EAPD DMIC1/GPIO 0/SPDIFOUT1 PVDD PORTD_+R PORTD_-R PVSS PORTD_-L PORTD_+L PVDD AVDD2 Vreg(+2.5V) 8. PINOUT AND PACKAGING Figure 22. 48QFN Pin Assignment TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 295 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 8.0.1. 48QFN Pin Table Pin Name Pin Function I/O Internal Pull-up/Pull-down 48 pin location DVDD_CORE 1.5V Digital Core Regulator Filter Cap O(Digital) None 1 DMIC_CLK/GPIO1 Digital Mic Clock Output/GPIO1 I/O(Digital) 60K Pull-down 2 DVDD_IO Reference Voltage (1.5V or 3.3V) I(Digital) None 3 DMIC0/GPIO2 Digital Mic 01 Input/GPIO2 I/O(Digital) 60K Pull-down 4 SDATA_OUT HD Audio Serial Data output from controller I/O(Digital) None 5 BITCLK HD Audio Bit Clock I(Digital) None 6 DVSS Digital Ground I(Digital) None 7 SDATA_IN HD Audio Serial Data Input to controller O(Digital) None 8 DVDD Digital Vdd= 3.3V I(Digital) None 9 SYNC HD Audio Frame Sync I(Digital) None 10 RESET# HD Audio Reset I(Digital) None 11 PC_BEEP PC Beep I(Analog) None 12 SENSE_A Jack insertion detection Ports A,B,C, SPDIFOUT0 Jack insertion detection Ports E,F, DMIC0, SPDIFOUT1 (DMIC1) I(Analog) None 13 I(Analog) None 14 SENSE_B PORTE_L Port E Left I/O(Analog) None 15 PORTE_R Port E Right I/O(Analog) None 16 PORTF_L Port F Left I/O(Analog) None 17 PORTF_R Port F Right I/O(Analog) None 18 PORTC_L Port C Left I/O(Analog) None 19 PORTC_R Port C Right I/O(Analog) None 20 VREFFILT Analog Virtual Ground O(Analog) None 21 CAP2 Reference filter Cap O(Analog) None 22 VREFOUT-A Reference Voltage out drive (intended for mic bias) O(Analog) None 23 VREFOUT-C/GPIO4 Reference Voltage out drive (intended for mic bias) O(Analog) or general purpose I/O None 24 Mono_Out Mono output O(Analog) None 25 AVSS1 Analog Ground I(Analog) None 26 AVDD1 Analog Vdd=5.0V or 3.3V I(Analog) None 27 PORTA_L (HP0) Port A Output Left I/O(Analog) None 28 PORTA_R (HP0) Port A Output Right I/O(Analog) None 29 AVSS Analog Ground I(Analog) None 30 PORTB_L (HP1) Port B Output Left I/O(Analog) None 31 PORTB_R (HP1) Port B Output Right I/O(Analog) None 32 AVSS Analog Ground I(Analog) None 33 V- Negative analog supply O(Analog) None 34 Table 33. 48QFN Pin Description TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 296 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO Pin Name Pin Function I/O Internal Pull-up/Pull-down 48 pin location CAP- Charge pump cap - O(Analog) None 35 CAP+ Charge pump cap + O(Analog) None 36 VREG Linear Regulator Output (2.5V) filter cap O(Analog) None 37 AVDD2 Analog Supply for VREG I(Analog) None 38 PVDD Analog Supply for Class-D amp I(Analog) None 39 PORTD_+L BTL amp Left + O(Analog) None 40 PORTD_-L BTL amp Left - O(Analog) None 41 PVSS Analog Ground I(Analog) None 42 PORTD_-R BTL amp Right - O(Analog) None 43 PORTD_+R BTL amp Right + O(Analog) None 44 PVDD Analog Supply for Class-D amp I(Analog) None 45 DMIC1/GPIO/SPDIFOUT1 Digital Microphone input, SPDIF Output, or GPIO0 I/O(Digital) 60K Pull-down 46 EAPD EAPD I/O (Digital) 60K Pull-up 47 SPDIFOUT0/GPIO3 SPDIF0 O(Digital) 60K pull-down 48 Table 33. 48QFN Pin Description TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 297 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 8.0.2. 48QFN Package Outline and Package Dimensions Package dimensions are kept current with JEDEC Publication No. 95 QFN Dimensions in mm Key Min Nom Max A 0.80 0.90 1.0 A1 0.00 0.02 0.05 A3 0.20 REF D 7.00 BSC D1 5.50 BSC E 7.00 BSC E1 L 5.50 BSC 0.35 0.40 e 0.50 BSC R 0.20-0.25 0.45 b 0.18 0.25 0.30 D2 5.50 5.65 5.80 E2 5.50 5.65 5.80 ZD 0.75 BSC ZE 0.75 BSC Additional Approved Option Figure 23. 48QFN Package Diagram TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 298 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 8.1. Standard Reflow Profile Data Note: These devices can be hand soldered at 360 oC for 3 to 5 seconds. FROM: IPC / JEDEC J-STD-020C "Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices" (www.jedec.org/download). Profile Feature Pb Free Assembly Average Ramp-Up Rate (Tsmax - Tp) o 3 C / second max Preheat: Temperature Min (Tsmin) Temperature Max (Tsmax) Time (tsmin - tsmax) 150 oC 200 oC 60 - 180 seconds Time maintained above: Temperature (TL) Time (tL) 217 oC 60 - 150 seconds Peak / Classification Temperature (Tp) Time within 5 oC of actual Peak Temperature (tp) Ramp-Down rate Time 25 oC to Peak Temperature See "Package Classification Reflow Temperatures" 20 - 40 seconds 6 oC / second max 8 minutes max Note: All temperatures refer to topside of the package, measured on the package body surface. Table 34. Standard Reflow Profile TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 299 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 9. DISCLAIMER While the information presented herein has been checked for both accuracy and reliability, manufacturer assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial applications. Any other applications, such as those requiring extended temperature range, high reliability, or other extraordinary environmental requirements, are not recommended without additional processing by manufacturer. Manufacturer reserves the right to change any circuitry or specifications without notice. Manufacturer does not authorize or warrant any product for use in life support devices or critical medical instruments. TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 300 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM,CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO 10. DOCUMENT REVISION HISTORY Revision Date 0.5 November 2009 0.8 March 2010 Added widget details, front page feature bullet updates 0.85 June 2010 Aux mode section added 0.9 0.91 Description of Change Initial release September 2010 Added changes for YA silicon revision (ZA/ZB prior settings referenced) AFG EAPD bit added for PortE Headphone control. AFG ComJack bits added to select debounce time. Port E headphone enable bit added. AFG EAPD Aux audio bit added for Port E.Removed SCS support. Updated conditions of performance characteristics, added HDA signalling voltage to condition for power measurements. Default changed on BTL/HD_Mode from 0 to 1. Updated Record Path behavior tabel for Aux mode. Updated Pin Configuration Default Settings.Corrected Combo Jack diagram. October 2010 Updated LDO Level Control values. Corrected step size and thermal trip in BTL section. Updated SPKVOL L/R step size to .75dB. Added additional verb for updating speaker L and R volume at the same time (to match HDA implementation). Widget 22h verbs added/reordered. Clarified AuxMode section wording related to D3Cold entry. Added description text for High pass and Mono band pass filter features. 0.92 May 2011 Corrected Sense A/B description and table. 0.93 June 2011 Corrected front page bullet for BTL voltage. 1.0 October 2011 Corrected Left vs Right channel for the EQ coefficients to match silicon. Updated electrical characteristics for typical values. Removed Preliminary. Removed comments related to ZA and ZB silicon since they were non-production. Added WB silicon widget items: ComboJackTiming in the AFG and ScStableTimeSel added to AFG AnaBTL. Added PVDD value for the digital maximum supply voltage and footnote to the GPIO characteristics for the Input Low and High Voltage. Added missing EAPD widget details. 1.1 November 2011 Added feature bullet and description section for microphone input mute which is available only on silicon revisions WB and beyond. 1.2 January 2012 1.3 March 2012 Corrections for 022FB0 / 0227B0 to 022FB6 / 0227B6 as they are not reachable via NID22 but must be accessed through the Port Nodes.UpdatedNID22 registers with reset information, which is different for WC silicon revision. Added ComboJackTime widget and EAPD widget details. 1.4 June 2012 Added THD+N setting to Class D Output power and 3W typical line. 1.5 February 2013 Added Industrial temp package option for revisions WC and beyond. 1.6 September 2014 Released in TSI Format TSITM CONFIDENTIAL (c)2014 TEMPO SEMICONDCUTOR, INC. 301 V 1.6 09/14 92HD91 92HD91 SINGLE CHIP PC AUDIO SYSTEM, CODEC+SPEAKER AMPLIFIER+CAPLESS HP+LDO www.temposemi.com 8627 N. MoPac Expwy Suite 130 Austin, Texas 78759 DISCLAIMER Tempo Semiconductor, Inc. (TSI) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at TSI's sole discretion. All information in this document, including descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of TSI's products for any particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of TSI or any third parties. TSI's products are not intended for use in life support systems or similar devices where the failure or malfunction of an TSI product can be reasonably expected to significantly affect the health or safety of users. Anyone using an TSI product in such a manner does so at their own risk, absent an express, written agreement by TSI. Tempo Semiconductor, TSI and the TSI logo are registered trademarks of TSI. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of TSI or their respective third party owners. Copyright 2014. All rights reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Tempo Semiconductor: 92HD91B1X5NLGXWCX 92HD91B1X5NLGXYAX 92HD91B1X5NLGXWCX8 92HD91B1X5NLGXYAX8 92HD91B2X5NLGXWCX 92HD91B2X5NLGXWCX8 92HD91B1X5NLGIWCX8 92HD91B2X5NLGIWCX 92HD91B2X5NLGIWCX8 92HD91B2X5NLGXYAX 92HD91B2X5NLGXYAX8