MW MEAN WELL 150W U-Bracket Single Output with PFC Function @ Features: * Built in active PFC function * Constant Voltage design * High efficiency up to 93% USP-150 series * Universal AC input / Full range(up to 295VAC) Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection U-bracket low profile:33mm ZVS technology to reduce power dissipation 3 years warranty A. B CE SPECIFICATION MODEL USP-150-12 USP-150-15 USP-150-24 USP-150-36 USP-150-48 DC VOLTAGE 12V 15V 24V 36V 48Vv RATED CURRENT 12.5A 10A 6.3A 4.2A 3.2A CURRENT RANGE 0~12.5A 0~10A 0~6.3A 0~4.2A 0~3.2A RATED POWER 150W 150W 151.2W 151.2W 153.6W OUTPUT | RIPPLE & NOISE (max.) Note.2) 100mVp-p 150mVp-p 150mVp-p 250mVp-p 250mVp-p VOLTAGE ADJ. RANGE 11.0~13.2V 13.5~16.5V 21.6~26.4V 32.4~39.6V 43.2~52.8V VOLTAGE TOLERANCE Note.3 | +2.0% +2.0% +2.0% +2.0% +2.0% LINE REGULATION +0.5% +0.5% +0.5% +0.5% +0.5% LOAD REGULATION +1.0% +1.0% +1.0% +1.0% +1.0% SETUP, RISE TIME 2000ms, 100ms/230VAC 3000ms, 100ms/115VAC at full load HOLD UP TIME (Typ.) 16ms/230VAC 16ms/115VAC at full load VOLTAGE RANGE Note.4 | 90 ~ 295VAC 127 ~ 417VDC FREQUENCY RANGE 47 ~ 63Hz POWER FACTOR (Typ.) PF20.98/115VAC PF20.96/230VAC = PF20.94/277VAC at full load INPUT _| EFFICIENCY (Typ.) 91.5% 91.5% 93% 93% 93% AC CURRENT (Typ.) 2A/115VAC 1A/230VAC _0.7A/277VAC INRUSH CURRENT (Typ.) Cold start 65A/230VAC LEAKAGE CURRENT <2mA/ 240VAC OVERLOAD 130~185% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed SHORT CIRCUIT Protection type : Hiccup mode, recovers automatically after fault condition is removed 13.6 ~ 16.3V [47 ~21V 26.7 ~ 32.4V 41.4 ~48.6V 53 ~ 64.8V PROTECTION | OVER VOLTAGE > 7 Protection type : Shut down o/p voltage with auto-recovery or re-power on to recovery 100C 45C (RTH2) OVER TEMPERATURE Protection type : Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP -30 ~ +65C (Refer to output load derating curve) WORKING HUMIDITY 20 ~ 90% RH non-condensing ENVIRONMENT | STORAGE TEMP., HUMIDITY | -40 ~ +85C, 10 ~ 95% RH TEMP. COEFFICIENT 0.03%/C (0 ~ 60C ) VIBRATION 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes SAFETY STANDARDS UL60950-1 approved; design refer to IEC60950-1,EN60950-1 SAFETY & | WITHSTAND VOLTAGE Note.6| I/P-O/P:3.0KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC EMC ISOLATION RESISTANCE I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC/25C/ 70%RH (Note 5) EMC EMISSION Compliance to EN55022 (CISPR22) Class B,EN61000-3-2,EN61000-3-3 EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11; EN55024, light industry level (surge 4KV), criteriaA MTBF 216.3K hrs min. | MIL-HDBK-217F (25C) OTHERS | DIMENSION 215*67.4*33mm (L*W*H) PACKING 0.48kg; 24PCS/12.5kg/0.61 CUFT NOTE 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25C of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Please remove the component D1 before conducted Hipot test. File Name:USP-150-SPEC 2012-04-28MW MEAN WELL 150W U-Bracket Single Output with PFC Function USP-150 series M@ Mechanical Specification Case No.988 _Unit:mm . 6 & & a @ erp op _| Sp 4.5x4PL 194 35 208 _ 215 . ee 211 _ _ 33 . 201 _ (_ I H i | TL O O i 0-04 2 | & g . cN2 7 nt oO Volo Tat nx ~ )) }o}) 1; .@ ig 8a BS - 0-0 8| [fe \ < SS 218 in C. asl ee | / \ (ofo O.nO4 OL Lee | p04) Vee I (og \C > Q KP) 0) Oe ! kK Qo/O l f> t | AC Input Connector (CN1) :SVH-21T-P1.1 or equivalent $3.5x4PL DC Terminal pin NO. Assignment (CN2) AMBIENT TEMPERATURE ('C) PinNo. | Assignment | Mating Housing Terminal 1 FG+ PinNo. | Assignment Terminal 2 ACIL JST VHR JST SVH-21T-P1.1 1,2 V- DECA 3 ACIN or equivalent or equivalent 3,4 V+ T21-BM10-04 Hi Block Diagram vPO) citer [7] recririers [| controuer [1 swt "RECTIFIERS. t ov ING &FILTER v 4 x LL net 7 FG O | DETECTION PWM x CIRCUIT O.LP. et as CONVERTER OVP. = i Derating Curve Mi Static Characteristics 0b | 100} Mount with a 300*500*2mm heatsink ook 100 4 80 80 = 100VAC | rr = 60 230VAC Cy Pa = 60+ < 4 a So S 50 _ 3 r 20- 4 40 1 1 1 1 1 1 1 a 1 1 1 1 1 1 1 1 30 0 10 20 30 40 45 50 55 60 65 70 (HORIZONTAL) 90 100 110 135 155 230 295 INPUT VOLTAGE (V) 60Hz File Name:USP-150-SPEC 2012-04-28