APT5010B2LL APT5010LLL 500V 46A 0.100W B2LL POWER MOS 7TM Power MOS 7TM is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7TM by significantly lowering RDS(ON) and Qg. Power MOS 7TM combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg * Increased Power Dissipation * Easier To Drive * Popular T-MAXTM or TO-264 Package MAXIMUM RATINGS Symbol VDSS ID T-MAXTM TO-264 LLL D G S All Ratings: TC = 25C unless otherwise specified. Parameter APT5010 UNIT 500 Volts Drain-Source Voltage L A C I N H C N E T IO E T C MA N A OR V AD INF 46 Continuous Drain Current @ TC = 25C 1 Amps IDM Pulsed Drain Current VGS Gate-Source Voltage Continuous 30 Gate-Source Voltage Transient 40 Total Power Dissipation @ TC = 25C 500 Watts Linear Derating Factor 4.0 W/C VGSM PD TJ,TSTG 184 -55 to 150 Operating and Storage Junction Temperature Range TL Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current EAR Repetitive Avalanche Energy EAS Single Pulse Avalanche Energy 1 Volts C 300 46 (Repetitive and Non-Repetitive) 1 Amps 50 4 mJ 1800 STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (VGS = 0V, ID = 250A) 500 Volts 46 Amps On State Drain Current 2 (VDS > ID(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) TYP MAX 0.100 Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) 25 Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) Ohms A 250 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) UNIT 3 100 nA 5 Volts CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 050-7011 Rev- 1-2001 Symbol DYNAMIC CHARACTERISTICS Symbol APT5010 B2LL - LLL Characteristic Test Conditions MIN TYP Ciss Input Capacitance VGS = 0V 4410 Coss Output Capacitance VDS = 25V 900 Crss Reverse Transfer Capacitance f = 1 MHz 69 Qg Total Gate Charge VGS = 10V 110 Qgs 3 Gate-Drain ("Miller") Charge td(on) Turn-on Delay Time td(off) tf 29 ID = ID[Cont.] @ 25C 50 VGS = 15V 15 VDD = 0.5 VDSS 13 ID = ID[Cont.] @ 25C 32 RG = 0.6W 7 Rise Time Turn-off Delay Time Fall Time UNIT pF L A C I N H C N E T O I E T C MA N A OR V AD INF VDD = 0.5 VDSS Gate-Source Charge Qgd tr MAX nC ns SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS Characteristic / Test Conditions MIN TYP Continuous Source Current (Body Diode) ISM Pulsed Source Current 1 VSD Diode Forward Voltage 2 MAX 46 (Body Diode) 184 (VGS = 0V, IS = -ID[Cont.]) 1.3 UNIT Amps Volts t rr Reverse Recovery Time (IS = -ID[Cont.], dl S/dt = 100A/s) 595 ns Q rr Reverse Recovery Charge (IS = -ID[Cont.], dl S/dt = 100A/s) 11.0 C THERMAL CHARACTERISTICS Symbol Characteristic MIN RqJC Junction to Case RqJA Junction to Ambient TYP MAX 0.25 40 1 Repetitive Rating: Pulse width limited by maximum junction 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 1.70mH, R = 25W, Peak I = 46A j G L temperature. 2 Pulse Test: Pulse width < 380 S, Duty Cycle < 2% APT Reserves the right to change, without notice, the specifications and information contained herein. T-MAXTM (B2) Package Outline 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) TO-264 (L) Package Outline 4.60 (.181) 5.21 (.205) 1.80 (.071) 2.01 (.079) 15.49 (.610) 16.26 (.640) 19.51 (.768) 20.50 (.807) 3.10 (.122) 3.48 (.137) 5.38 (.212) 6.20 (.244) 5.79 (.228) 6.20 (.244) Drain Drain 20.80 (.819) 21.46 (.845) 4.50 (.177) Max. 0.40 (.016) 0.79 (.031) 050-7011 Rev- 1-2001 2.87 (.113) 3.12 (.123) 19.81 (.780) 20.32 (.800) 19.81 (.780) 21.39 (.842) Gate Drain Source Gate Drain Source 0.48 (.019) 0.84 (.033) 2.59 (.102) 3.00 (.118) 5.45 (.215) BSC 2-Plcs. 0.76 (.030) 1.30 (.051) 2.79 (.110) 3.18 (.125) 5.45 (.215) BSC 2-Plcs. These dimensions are equal to the TO-247 without the mounting hole. Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 2.29 (.090) 2.69 (.106) 2.29 (.090) 2.69 (.106) 1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055) 2.21 (.087) 2.59 (.102) 25.48 (1.003) 26.49 (1.043) Dimensions in Millimeters and (Inches) 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058 UNIT C/W