LS T670, LO T670, LY T670, LG T670, LP T670
TOPLED®
2002-04-03 1
Besondere Merkmal e
•Gehäusetyp: weißes P-LCC-2-Gehäuse
•Besonderheit des Bauteils: extrem b reite
Abstrahlcharakteristik; ideal für
Hin terleuchtunge n un d Einkop pl ungen in
Lichtleiter
•Wellenlänge: 628 nm (super-rot),
606 nm (orange), 587 nm (gelb), 570 nm (grün),
560 nm (pure green)
•Abstrahlwinkel: Lambertscher Stra hler (120°)
•Technologie: GaA lP (super -ro t, orange, ge l b,
grün), GaP (pure green)
•optischer Wirkungsgrad: 1,5 lm/W (super-rot,
orange, gelb), 2,5 lm/W (grün),
0,6 lm/W (pure green)
•Gruppierungsparameter: Lichtstärke,
Wellenlänge
•Verarbeitungsmethode: für alle
SMT-Bestückte ch niken ge ei gnet
•Lötmethode: IR Reflow Löten und
Wellenlöten (TTW)
•Vorbehandlung: nach JEDEC Leve l 2
•Gurtung: 8-mm Gurt mit 2000/Rolle, ø180 mm
oder 8000/Rolle, ø330 mm
Anwendungen
•Informationsanzeigen im Innen- und
Außenbereich
•opti sc he r Indikat or
•Hinterleuchtung (LCD, Handy, Schalter, Tasten,
Displays, Werbebeleuchtung,
Allgemeinbeleuchtung)
•Innenbeleuchtung im Automobilbereich
(z. B. Instrument enbeleuc htung)
•Markierungsbeleuchtung (z.B. Stufen,
Flucht wege, u .ä.)
•Einkopplung in Lichtleiter
•Laufschriftanzeigen
•Signal- und Sy m bo lle uc hten
Features
•package: whit e P-LCC-2 package
•feat ur e of th e device: extremely wide viewing
angle ; ideal for backli ghting an d coupli ng in ligh t
guides
•wavelength: 628 nm (super-red), 606 nm
(orange), 587 nm (yellow), 570 nm (green),
560 nm (pure green)
•viewing angle: Lambertian Em itter (120°)
•technology: GaAlP (super-red, orange, yellow,
green) , GaP (pure green)
•optical efficiency: 1.5 lm/W (super-red, orange,
yellow) , 2.5 lm/W (green ), 0.6 lm/W (pur e green)
•grouping parameter: luminous intensity,
wavelength
•assembly methods: suitable for all
SMT assembly met hods
•soldering methods: IR reflow soldering and
TTW so ldering
•preconditioning: acc. to JEDEC Level 2
•taping: 8-mm tape with 2000/reel, ø180 mm
or 8000/reel, ø330 mm
Applications
•indoor and ou tdoor d isplays
•optical indicators
•back lighting (LCD, cellular phones, switches,
keys, dis pl ay s, illu min ate d advertising, general
lighting)
•interior automotive lighting
(e.g. dashboard backlighting)
•marker lights (e.g. steps, exit ways, etc.)
•coupling into l ight guides
•light writing displays
•signal and symbol luminaire
2002-04-03 2
LS T670, LO T670, LY T670, LG T670, LP T670
Anm.: -1 gesamter Farbbereich (siehe Seite 4)
-24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
-26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5)
Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe,
die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhältlich.
In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten.
Note: -1 Total color tolerance range (please see page 4)
-24 Total color tolerance range, delivery in single groups (please see page 5)
-26 Total color tolerance range, delivery in single groups (please see page 5)
The standard shipping format for serial types includes a lower or upper family group of 3 or 4
individual groups. Individual half groups are not available.
No packing unit / tape ever contains more than one luminous intensity half group.
Typ
Type
Emissions-
farbe
Color of
Emission
Farbe der
Lichtaustritts-
fläche
Color of the
Light Emitting
Area
Lichtstärke
Luminous
Intensity
IF = 10 mA
IV (mcd)
Lichtstrom
Luminous
Flux
IF = 10 mA
ΦV (mlm)
Bestellnummer
Ordering Code
LS T670-H2J2-1
LS T670-J2L1-1 super-red colorless clear 3.55 ... 7.10
5.60 ... 14.00 15 (typ.)
28 (typ.) Q62703-Q5094
Q62703-Q5095
LO T670-J1K1-24
LO T670-K1L2-24 orange colorless clear 4.50 ... 9.00
7.10 ... 18.00 20 (typ.)
36 (typ.) Q62703-Q5046
Q62703-Q5047
LY T670-J1K1-26
LY T670-K1L2-26 yellow colorless clear 4.50 ... 9.00
7.10 ... 18.00 20 (typ.)
36 (typ.) Q62703-Q5132
Q62703-Q5133
LG T670-K1L1-1
LG T670-L1M2-1 green colorless clear 7.10 ... 14.00
11.20 ... 28.00 31 (typ.)
56 (typ.) Q62703-Q5010
Q62703-Q5011
LP T670-G1H1-1
LP T670-H1J2-1 pure green colorless clear 1.80 ... 3.55
2.80 ... 7.10 7 (typ.)
14 (typ.) Q62703-Q5064
Q62703-Q5065
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 3
Grenzwerte
Maximum Ratings
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS, LO,
LY, LG LP
Betriebstemperatur
Operating temperature range Top – 40 … + 100 °C
Lagertemperatur
Storage temperature range Tstg – 40 … + 100 °C
Sperrschichttemperatur
Junction temperature Tj+ 100 °C
Durchlassstrom
Forward current IF30 mA
Stoßstrom
Surge current
t ≤ 10 µs, D = 0.005
IFM 0.5 A
Sperrspannung
Reverse voltage VR5V
Leistungsaufnahme
Power consumption Ptot 95 90 mW
Wärmewiderstand
Thermal resistance
Sperrschicht/Umgebung
Junction/ambient
Sperrschicht/Lötpad
Junction/soldering point
Montage auf PC-Board FR 4 (Padgröße ≥ 16 mm 2)
mounted on PC board FR 4 (pad size ≥ 16 mm 2)
Rth JA
Rth JS
400
180
K/W
K/W
2002-04-03 4
LS T670, LO T670, LY T670, LG T670, LP T670
Kennwerte (TA = 25 °C)
Characteristics
Bezeichnung
Parameter Symbol
Symbol Wert
Value Einheit
Unit
LS LO LY LG LP
Wellenlänge des emittierten Lichtes (typ.)
Wavelength at peak emission
IF = 10 mA
λpeak 635 610 586 572 557 nm
Dominantwellenlänge 1) (typ.)
Dominant wavelength 1)
IF = 10 mA
λdom 628
± 6 606
+3/–6587
+8/–7570
± 6 560
± 6 nm
Spektrale Bandbreite bei 50 % Irel max (typ.)
Spectral bandwidth at 50 % Irel max
IF = 10 mA
∆λ 45 40 45 25 22 nm
Abstrahlwinkel bei 50 % IV (Vollwinkel) (typ.)
Viewing angle at 50 % IV
2ϕ120 120 120 120 120 Grad
deg.
Durchlassspannung 2) (typ.)
Forward voltage 2) (max.)
IF = 10 mA
VF
VF
2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 2.0
2.5 V
V
Sperrstrom (typ . )
Reverse current (max.)
VR = 5 V
IR
IR
0.01
10 0.01
10 0.01
10 0.01
10 0.01
10 µA
µA
Temperaturkoeffizient von λpeak (typ.)
Temperature coefficient of λpeak
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλpeak 0.11 0.12 0.10 0.11 0.11 nm/K
Temperaturkoeffizient von λdom (typ.)
Temperature coefficient of λdom
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCλdom 0.07 0.07 0.07 0.07 0.05 nm/K
Temperaturkoeffizient vonVF(typ.)
Temperature coefficient of VF
IF = 10 mA; –10°C ≤ T ≤ 100°C
TCV– 1.9 – 1.9 – 1.9 – 1.4 – 2.1 mV/K
Optischer Wirkungsgrad (typ.)
Optical efficiency
IF = 10 mA
ηopt 1.5 1.5 1.5 2.5 0.6 lm/W
1) Wellenlängen werden mit einer St romeinprägedauer von 25 ms und einer Genauigkeit von ±1 nm ermittelt.
Wavelengths are tested at a current pulse durat ion of 25 ms and a tole rance of ±1 nm.
2) Spannungswerte werden mit einer Stromeinpräged auer von 1 ms und eine r Genauigkeit von ±0, 1 V ermittelt.
Voltage s are tested at a curre nt puls e duration of 1 ms and a t olerance of ±0.1 V .
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 5
Helligkeitswerte werd en m i t einer Stromeinprägedauer von 25 m s un d einer Genauigk eit von ±11% erm it t elt .
Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of ±11%.
1) Wellenlängengruppen / Wavelength groups
Gruppe
Group yellow orange Einheit
Unit
min. max. min. max.
2 580 583 600 603 nm
3 583 586 603 606 nm
4 586 589 606 609 nm
5 589 592 nm
6 592 595 nm
Helligkeits-Gruppierungsschema
Luminous Intensity Groups
Lichtgruppe
Luminous Intensity Group Lichtstärke
Luminous Intensity
IV (mcd)
Lichtstrom
Luminous Flux
ΦV (mlm)
G1
G2
H1
H2
J1
J2
K1
K2
L1
L2
M1
M2
1.80 ... 2.24
2.24 ... 2.80
2.80 ... 3.55
3.55 ... 4.50
4.50 ... 5.60
5.60 ... 7.10
7.10 ... 9.00
9.00 ... 11.20
11.20 ... 14.00
14.00 ... 18.00
18.00 ... 22.40
22.40 ... 28.00
6.0 (typ.)
7.6 (typ.)
8.5 (typ.)
12.0 (typ.)
15.0 (typ.)
19.0 (typ.)
24.0 (typ.)
30.0 (typ.)
40.0 (typ.)
50.0 (typ.)
60.0 (typ.)
75.0 (typ.)
Gruppenbezeichnung auf Etikett
Group Name on Label
Beispiel: K2-3
Example: K2-3
Lichtgruppe
Luminous Intensity Group Halbgruppe
Half Group Wellenlänge
Wavelength
K23
2002-04-03 6
LS T670, LO T670, LY T670, LG T670, LP T670
Relative spektrale Emission Irel = f (λ), TA = 25 °C, IF = 10 mA
Relative Spectral Emission
V(λ) = spektrale Augenempfindlichkeit
Standard eye response curve
Abstrahlcharakteristik Irel = f (ϕ)
Radiation Characteristic
%
rel
λ
OHL01697
100
80
60
40
20
0
400 450 500 550 600 650 700
nm
I
pure-green
green
yellow
orange
super-red
λ
V
0
0.2
0.4
1.0
0.8
0.6
ϕ
1.0 0.8 0.6 0.4
0˚10˚20˚40˚ 30˚
OHL01660
50˚
60˚
70˚
80˚
90˚
100˚ 0˚ 20˚ 40˚ 60˚ 80˚ 100˚ 120˚
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 7
Durchlassstrom IF = f (VF)
Forward Current
TA = 25 °C
Maximal zulässiger Durchlassstrom IF = f (TA)
Max. Permissible Forward Current
Relative Lichtstärke IV/IV(10 mA) = f (IF)
Relative Luminous Intensity
TA = 25 °C
Relative Lichtstärke IV / IV(25 °C)= f (TA)
Relative Luminous Intensity
IF = 10 mA
10
-1
V
pure-green
5
super-red
orange/yellow
green
OHL02145
I
F
F
V
0
10
1
10
2
10
5
mA
1.0 1.4 1.8 2.2 2.6 3.0 3.4
T
OHL00962
0
F
I
0 20 40 60 80 C 100
mA
10
20
30
40
T
A
T
S
temp. ambient
temp. solder point
Τ
A
Τ
S
V
V (10 mA)
10-1 0
10 1012
10
mA
red
yellow
green
super-red
orange
pure-green
10 -3
5
OHL02146
F
Ι
5
-2
10
5
-1
10
0
10
1
10
ΙΙ
55
yellow
green
orange
super-red
pure-green
0.0
OHL02150
˚C
A
0 20 40 60 80 100
V
V
I
I
0.4
0.8
1.2
1.6
2.0
(25 ˚C)
T
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 8
Zulässige Impulsbelastbarkeit IF = f (tp)
Permissible Pulse Handling Capability
Duty cycle D = parameter, TA = 25 °C
OHL01686
s10
-5
10
-4
10
-3
10
-2
10
-1
10
0
10
1
t
DI
TT
P
F
t
P
=
D
=0.005
0.01
0.02
0.05
0.2
0.5
DC
10
1
5
I
F
t
2
10
0.1
p
10
3
mA
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 9
Maßzeichnung
Package Outlines
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
Kathodenkennung: abgeschrägte Ecke
Cathode mark: bevelled edge
Gewicht / Approx. weight: 40 mg
GPLY6724
0.7 (0.028)
0.9 (0.035)
1.7 (0.067)
2.1 (0.083)
0.12 (0.005)
0.18 (0.007)
0.5 (0.020)
1.1 (0.043)
3.3 (0.130)
3.7 (0.146)
0.4 (0.016)
0.6 (0.024)
2.6 (0.102)
3.0 (0.118)
2.1 (0.083)
2.3 (0.091)
Cathode marking
3.0 (0.118)
3.4 (0.134)
(2.4) (0.095)
0.1 (0.004) (typ.)
4˚±1
2002-04-03 10
LS T670, LO T670, LY T670, LG T670, LP T670
Lötbedingungen Vorbehandlung nach JEDEC Level 2
Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lötprofil (nach IPC 9501)
IR Reflow Soldering Profile (acc. to IPC 9501)
OHLY0597
0
050 100 150 200 250
50
100
150
200
250
300
T
t
˚C
s
240-245 ˚C
10-40 s
183 ˚C
120 to 180 s
Defined for Preconditioning: up to 6 K/s
Ramp-down rate up to 6 K/s
Ramp-up rate up to 6 K/s
Defined for Preconditioning: 2-3 K/s
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 11
Wellenlöten (TTW) (nach CECC 00802)
TTW Soldering (acc. to CECC 00802)
OHLY0598
0
050 100 150 200 250
50
100
150
200
250
300
T
t
C
s
235 C
10 s
C... 260
1. Welle
1. wave
2. Welle
2. wave
5 K/s 2 K/s
ca 200 K/s
CC... 130100
2 K/s Zwangskühlung
forced cooling
Normalkurve
standard curve
Grenzkurven
limit curves
2002-04-03 12
LS T670, LO T670, LY T670, LG T670, LP T670
Empfohlenes Lötpaddesign IR-Reflow Löten / Wellenlöten (TTW)
Recommended Solder Pad IR Reflow Soldering / TTW Soldering
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
OHLPY970
4.5 (0.177)
2.6 (0.102)
1.5 (0.059)
Paddesign
for improved
heat dissipation
Cu-area > 16 mm
Cu-Fläche > 16 mm
2
für verbesserte
Padgeometrie
Wärmeableitung
2
Solder resist
Lötstopplack
4.5 (0.177)
1.5 (0.059)
2.6 (0.102)
LS T670, LO T670, LY T670, LG T670, LP T670
2002-04-03 13
Gurtung / Polarität und Lage Verpackungseinheit 2000/Rolle, ø180 mm oder
8000/Rolle, ø330 mm
Method of Taping / Polarity and Orientation Packing unit 2000/reel, ø180 mm or 8000/reel,
ø330 mm
Maße werden wi e fo lgt angegeben: mm (inch) / Dimensio ns are s pecified as follow s: m m (inc h).
OHAY2271
C
A
3.6 (0.142)
8 (0.315)
3.5 (0.138)
1.75 (0.069)
4 (0.157)1.5 (0.059)
2.9 (0.114) 4 (0.157)
2 (0.079)
2002-04-03 14
LS T670, LO T670, LY T670, LG T670, LP T670
Published by OSRAM Opto Semiconductors GmbH & Co. OHG
Wernerwerkstrasse 2, D-93049 Regensburg
© All Rights Reserved.
Attention please!
The inform at ion describe s the type of compon ent and shall not be considered as assur ed c haracteristics.
Terms of delivery and rights to change design reserved. Due to technical requirements components may contain
dangerous substances. For information on the types in question please contact our Sales Organization.
If printed or downloaded, please find the lates t vers ion in the Internet.
Packing
Please use the recyc ling operat ors known t o you. We can also help y ou – get in touch wit h your near est sales offic e.
By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing
material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs
incurred.
Components used in life-support devices or systems must be expressly authorized for such purpose! Critical
components 1 may only be us ed in life-support dev ic es or sys t ems 2 with the express written approval of OSRAM OS.
1 A critical c omponent is a compone nt used i n a life -support device or system whose fai lure can reasonably be expected
to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or
system.
2 Life sup port device s or syst ems ar e int ended (a ) to b e imp lanted in t he hu man body , or ( b) to supp ort a nd/or main tain
and sust ain human life. If th ey fail , it is rea so nable to assume th at the health of the user may be endangered.
Revision History: 2002-04-03
Previous Version: 2001-03-01
Page Subjects (major changes since last revision)
5 Wavelength grouping
2 wavelength grouping for yellow and orange
