TOPLED(R) LS T670, LO T670, LY T670, LG T670, LP T670 Besondere Merkmale * Gehausetyp: weies P-LCC-2-Gehause * Besonderheit des Bauteils: extrem breite Abstrahlcharakteristik; ideal fur Hinterleuchtungen und Einkopplungen in Lichtleiter * Wellenlange: 628 nm (super-rot), 606 nm (orange), 587 nm (gelb), 570 nm (grun), 560 nm (pure green) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: GaAlP (super-rot, orange, gelb, grun), GaP (pure green) * optischer Wirkungsgrad: 1,5 lm/W (super-rot, orange, gelb), 2,5 lm/W (grun), 0,6 lm/W (pure green) * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8-mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Features * package: white P-LCC-2 package * feature of the device: extremely wide viewing angle; ideal for backlighting and coupling in light guides * wavelength: 628 nm (super-red), 606 nm (orange), 587 nm (yellow), 570 nm (green), 560 nm (pure green) * viewing angle: Lambertian Emitter (120) * technology: GaAlP (super-red, orange, yellow, green), GaP (pure green) * optical efficiency: 1.5 lm/W (super-red, orange, yellow), 2.5 lm/W (green), 0.6 lm/W (pure green) * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8-mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm Anwendungen * Informationsanzeigen im Innen- und Auenbereich * optischer Indikator * Hinterleuchtung (LCD, Handy, Schalter, Tasten, Displays, Werbebeleuchtung, Allgemeinbeleuchtung) * Innenbeleuchtung im Automobilbereich (z. B. Instrumentenbeleuchtung) * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Einkopplung in Lichtleiter * Laufschriftanzeigen * Signal- und Symbolleuchten Applications * indoor and outdoor displays * optical indicators * backlighting (LCD, cellular phones, switches, keys, displays, illuminated advertising, general lighting) * interior automotive lighting (e.g. dashboard backlighting) * marker lights (e.g. steps, exit ways, etc.) * coupling into light guides * light writing displays * signal and symbol luminaire 2002-04-03 1 LS T670, LO T670, LY T670, LG T670, LP T670 Typ Emissionsfarbe Type Color of Emission LS T670-H2J2-1 LS T670-J2L1-1 super-red Farbe der Lichtaustrittsflache Color of the Light Emitting Area Lichtstarke Lichtstrom Bestellnummer Luminous Intensity IF = 10 mA IV (mcd) Luminous Flux IF = 10 mA V (mlm) Ordering Code colorless clear 3.55 ... 7.10 5.60 ... 14.00 15 (typ.) 28 (typ.) Q62703-Q5094 Q62703-Q5095 LO T670-J1K1-24 orange LO T670-K1L2-24 colorless clear 4.50 ... 9.00 7.10 ... 18.00 20 (typ.) 36 (typ.) Q62703-Q5046 Q62703-Q5047 LY T670-J1K1-26 yellow LY T670-K1L2-26 colorless clear 4.50 ... 9.00 7.10 ... 18.00 20 (typ.) 36 (typ.) Q62703-Q5132 Q62703-Q5133 LG T670-K1L1-1 LG T670-L1M2-1 green colorless clear 7.10 ... 14.00 11.20 ... 28.00 31 (typ.) 56 (typ.) Q62703-Q5010 Q62703-Q5011 LP T670-G1H1-1 LP T670-H1J2-1 pure green colorless clear 1.80 ... 3.55 2.80 ... 7.10 7 (typ.) 14 (typ.) Q62703-Q5064 Q62703-Q5065 Anm.: -1 gesamter Farbbereich (siehe Seite 4) -24 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) -26 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine untere bzw. eine obere Familiengruppe, die aus nur 3 bzw. 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Note: -1 Total color tolerance range (please see page 4) -24 Total color tolerance range, delivery in single groups (please see page 5) -26 Total color tolerance range, delivery in single groups (please see page 5) The standard shipping format for serial types includes a lower or upper family group of 3 or 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. 2002-04-03 2 LS T670, LO T670, LY T670, LG T670, LP T670 Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Wert Value LS, LO, LY, LG Einheit Unit LP Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 100 C Durchlassstrom Forward current IF 30 mA Stostrom Surge current t 10 s, D = 0.005 IFM 0.5 A Sperrspannung Reverse voltage VR 5 V Leistungsaufnahme Power consumption Ptot Warmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lotpad Junction/soldering point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2) 2002-04-03 3 95 90 mW 400 K/W 180 K/W LS T670, LO T670, LY T670, LG T670, LP T670 Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Symbol Symbol Wert Value Einheit Unit LS LO LY LG LP Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 10 mA (typ.) peak 635 610 586 572 557 nm Dominantwellenlange 1) Dominant wavelength 1) IF = 10 mA (typ.) dom 628 6 606 587 +8/-7 560 6 nm +3/-6 570 6 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 10 mA (typ.) 45 40 45 25 22 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 120 120 120 Grad deg. Durchlassspannung 2) Forward voltage 2) IF = 10 mA (typ.) (max.) VF VF 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 2.0 2.5 V V Sperrstrom Reverse current VR = 5 V (typ.) (max.) IR IR 0.01 0.01 0.01 0.01 0.01 A A 10 10 10 10 10 Temperaturkoeffizient von peak Temperature coefficient of peak IF = 10 mA; -10C T 100C (typ.) TCpeak 0.11 0.12 0.10 0.11 0.11 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 10 mA; -10C T 100C (typ.) TCdom 0.07 0.07 0.07 0.07 0.05 nm/K Temperaturkoeffizient vonVF Temperature coefficient of VF IF = 10 mA; -10C T 100C (typ.) TCV - 1.9 - 1.9 - 1.9 - 1.4 - 2.1 mV/K Optischer Wirkungsgrad Optical efficiency IF = 10 mA (typ.) opt 1.5 1.5 1.5 2.5 0.6 lm/W 1) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. 2) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. Voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. 2002-04-03 4 LS T670, LO T670, LY T670, LG T670, LP T670 1) Wellenlangengruppen / Wavelength groups Gruppe Group yellow orange min. max. min. Einheit Unit max. 2 580 583 600 603 nm 3 583 586 603 606 nm 4 586 589 606 609 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group Lichtstarke Luminous Intensity IV (mcd) G1 G2 H1 H2 J1 J2 K1 K2 L1 L2 M1 M2 1.80 ... 2.24 2.24 ... 2.80 2.80 ... 3.55 3.55 ... 4.50 4.50 ... 5.60 5.60 ... 7.10 7.10 ... 9.00 9.00 ... 11.20 11.20 ... 14.00 14.00 ... 18.00 18.00 ... 22.40 22.40 ... 28.00 Lichtstrom Luminous Flux V (mlm) 6.0 (typ.) 7.6 (typ.) 8.5 (typ.) 12.0 (typ.) 15.0 (typ.) 19.0 (typ.) 24.0 (typ.) 30.0 (typ.) 40.0 (typ.) 50.0 (typ.) 60.0 (typ.) 75.0 (typ.) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11%. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: K2-3 Example: K2-3 Lichtgruppe Luminous Intensity Group Halbgruppe Half Group Wellenlange Wavelength K 2 3 2002-04-03 5 LS T670, LO T670, LY T670, LG T670, LP T670 Relative spektrale Emission Irel = f (), TA = 25 C, IF = 10 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve OHL01697 100 % I rel 80 V super-red green 40 yellow pure-green orange 60 20 0 400 450 500 550 600 650 700 nm Abstrahlcharakteristik Irel = f () Radiation Characteristic 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2002-04-03 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LS T670, LO T670, LY T670, LG T670, LP T670 Durchlassstrom IF = f (VF) Forward Current TA = 25 C Relative Lichtstarke IV/IV(10 mA) = f (IF) Relative Luminous Intensity TA = 25 C OHL02145 10 2 OHL02146 10 1 V I F mA V (10 mA) 10 0 10 1 5 5 10 -1 5 pure-green 10 0 green red yellow super-red orange pure-green 10 -2 5 5 super-red orange/yellow green 10 -1 1.0 1.4 1.8 2.2 2.6 10 -3 -1 10 3.0 V 3.4 5 10 0 10 1 5 mA 10 2 F VF Maximal zulassiger Durchlassstrom IF = f (TA) Max. Permissible Forward Current OHL00962 40 IF Relative Lichtstarke IV / IV(25 C)= f (TA) Relative Luminous Intensity IF = 10 mA OHL02150 2.0 IV mA I V (25 C) 1.6 30 TS 1.2 yellow green TA 20 0.8 orange super-red pure-green 10 0.4 A temp. ambient S temp. solder point 0 0.0 0 20 40 60 80 C 100 20 40 60 80 C 100 TA T 2002-04-03 0 7 LS T670, LO T670, LY T670, LG T670, LP T670 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C OHL01686 10 3 IF D= mA tP tP IF T T D = 0.005 0.01 0.02 0.05 0.1 10 2 0.2 5 0.5 DC 10 1 -5 10 10 -4 10 -3 10 -2 10 -1 10 0 s 10 1 tp 2002-04-03 8 LS T670, LO T670, LY T670, LG T670, LP T670 Mazeichnung Package Outlines 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.5 (0.020) 1.1 (0.043) Cathode marking 0.9 (0.035) 0.7 (0.028) 3.7 (0.146) 3.3 (0.130) 41 (2.4) (0.095) 3.4 (0.134) 3.0 (0.118) 2.1 (0.083) 0.18 (0.007) 0.12 (0.005) 0.6 (0.024) 0.4 (0.016) GPLY6724 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). Kathodenkennung: abgeschragte Ecke Cathode mark: bevelled edge Gewicht / Approx. weight: 40 mg 2002-04-03 9 LS T670, LO T670, LY T670, LG T670, LP T670 Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501) OHLY0597 300 C T 250 240-245 C 10-40 s 200 183 C 120 to 180 s Ramp-down rate up to 6 K/s 150 Defined for Preconditioning: up to 6 K/s 100 Ramp-up rate up to 6 K/s 50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 t 2002-04-03 10 s 250 LS T670, LO T670, LY T670, LG T670, LP T670 Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2002-04-03 11 s 250 LS T670, LO T670, LY T670, LG T670, LP T670 Empfohlenes Lotpaddesign Recommended Solder Pad IR-Reflow Loten / Wellenloten (TTW) IR Reflow Soldering / TTW Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 4.5 (0.177) 1.5 (0.059) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 Lotstopplack Solder resist OHLPY970 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-04-03 12 LS T670, LO T670, LY T670, LG T670, LP T670 Gurtung / Polaritat und Lage Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 4 (0.157) C 8 (0.315) 1.75 (0.069) 2 (0.079) 3.5 (0.138) 2.9 (0.114) 4 (0.157) 3.6 (0.142) 1.5 (0.059) A OHAY2271 Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2002-04-03 13 LS T670, LO T670, LY T670, LG T670, LP T670 Revision History: 2002-04-03 Previous Version: 2001-03-01 Page Subjects (major changes since last revision) 5 Wavelength grouping 2 wavelength grouping for yellow and orange Published by OSRAM Opto Semiconductors GmbH & Co. OHG Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2002-04-03 14