Evaluation Board User Guide UG-083 One Technology Way * P.O. Box 9106 * Norwood, MA 02062-9106, U.S.A. * Tel: 781.329.4700 * Fax: 781.461.3113 * www.analog.com Evaluation Board for Single, High Speed Operational Amplifiers (8-Lead, 3 mm x 3 mm LFCSP with Dedicated Feedback Pin) Figure 1 shows the component side and circuit side of the evaluation board. Figure 2 shows the evaluation board schematic. FEATURES Enables quick breadboarding/prototyping User-defined circuit configuration Edge-mounted SMA connector provisions Easy connection to test equipment and other circuits The 4-layer evaluation board accepts edge-mounted SMA connectors on both inputs and outputs, which allows efficient and quick connection to test equipment or other circuitry. GENERAL DESCRIPTION The EB-O8CP33-1Z is designed to aid in the evaluation of single, high speed operational amplifiers. The EB-O8CP33-1Z is a bare board (that is, there are no components soldered to the board) that enables users to quickly prototype a variety of operational amplifier circuits, which minimizes risk and reduces time to market. The EB-O8CP33-1Z evaluation board supports any of the Analog Devices, Inc., single, high speed operational amplifiers in 8-pin, 3 mm x 3 mm lead frame chip scale packages (LFCSP) with a dedicated feedback pin. The board ground plane, component placement, and power supply bypassing have been optimized for maximum circuit flexibility and performance. The evaluation board uses a variety of SMT component case sizes: 0402, 0508, 0603, and 7343. Figure 3 and Figure 5 show the evaluation board assembly drawings. The metal layout pattern for connecting the board to the op amp and to the supporting circuitry is shown in Figure 4 and Figure 6. COMPONENT SIDE CIRCUIT SIDE Figure 1. EB-O8CP33-1Z Component and Circuit Side of PCB See the last page for an important warning and disclaimers. Rev. 0 | Page 1 of 4 08780-001 DIGITAL PICTURE OF EVALUATION BOARD UG-083 Evaluation Board User Guide TABLE OF CONTENTS Features .............................................................................................. 1 Evaluation Board Schematic ............................................................3 General Description ......................................................................... 1 Assembly Drawing and Board Layout ............................................4 Digital Picture of the Evaluation Board ......................................... 1 ESD Caution...................................................................................4 Revision History ............................................................................... 2 REVISION HISTORY 1/10--Revision 0: Initial Version Rev. 0 | Page 2 of 4 Figure 2. Universal Evaluation Board Schematic Rev. 0 | Page 3 of 4 2 GND1 BLK 1 GND2 BLK *USER-DEFINED VALUE 1 JOHNSON142-0701-801 2 JOHNSON142-0701-801 1 3 +IN 3 -IN 5 1 5 BLK GND3 4 4 1 EPAD 1 AGND +VIN AGND -VIN AGND BLK GND4 AGND 2 1 JP2 2 1 AGND R4* AGND R2* JPSLD02 JPSLD02 R3* R1* +VS -VS -VS C1* R5* PD/DIS BLK AGND R8* C2 0.1UF GEN_LFCSP8-3X3 1 1K R7 R6 1K +VS EPAD 4 3 2 1 3 2 1 PD/DIS U1 5 6 7 8 N P AGND 10UF C4 -VS AGND 10UF C3 +VS MOLEX22-03-2031 PAD JP1 N P -VS 1 R9* 1 +VS .1UF AGND AGND VOUT AGND R10* .1UF C5 C6 BLU -VS RED +VS AGND -VS 5 1 4 3 2 MOLEX22-23-2031 PWR AGND JOHNSON142-0701-801 OUT 3 2 1 Evaluation Board User Guide UG-083 EVALUATION BOARD SCHEMATIC 08780-002 UG-083 Evaluation Board User Guide 08780-003 08780-005 ASSEMBLY DRAWING AND BOARD LAYOUT Figure 5. Board Assembly Drawing, Circuit Side 08780-004 08780-006 Figure 3. Board Assembly Drawing, Component Side Figure 6. Board Layout Pattern, Circuit Side Figure 4. Board Layout Pattern, Component Side ESD CAUTION Evaluation boards are only intended for device evaluation and not for production purposes. Evaluation boards are supplied "as is" and without warranties of any kind, express, implied, or statutory including, but not limited to, any implied warranty of merchantability or fitness for a particular purpose. No license is granted by implication or otherwise under any patents or other intellectual property by application or use of evaluation boards. Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Analog Devices reserves the right to change devices or specifications at any time without notice. Trademarks and registered trademarks are the property of their respective owners. Evaluation boards are not authorized to be used in life support devices or systems. (c)2010 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. UG08780-0-1/10(0) Rev. 0 | Page 4 of 4