RN262CS
Diodes
1/2
PIN diode
RN262CS
zApplications zExter nal dimensions (Unit : mm) zLand size figure (Unit : mm)
High frequency sw itching
0.55
0.5
0.45
0.45
VMN2
zFeatures
1) Ultra small mold type. (VMN2)
2) Low high-frequency forward resistance / low
capacitance (C
T
).
zConstruction zStructure
ROHM : VMN2
dot (year week factory) + day
0.16±0.05
0.37±0.03
0.6±0.05
0.35±0.1
0.9±0.05
1.0±0.05
0.156
Silicon epitaxial planar
zTaping dimensions (Unit : mm)
0.7±0.05 4.0±0.1
2±0.05
φ0.5
4±0.1 2±0.05 φ1.55
1.75±0.1
8.0±0.2
3.5±0.05
1.1±0.05
0.2±0.05
0.52
zAbsolute maximum ratings (Ta=25°C)
Symbol Unit
VRV
IFmA
PdmW
Tj ℃
Tstg ℃
zElectrical characteristics (Ta=25°C)
Storage temperature 150
-55 to +150
Limits
30
100
Parameter
orward current
er dissipation 100
Reverse voltage
F
Pow
Junction temperature
Symbol Min. Typ. Max. Unit
V
F
--1 V
I
F
=10mA
I
R
--0.1µA
V
R
=30V
Ct - - 0.4 pF V
R
=1V , f=1MHz
--2.8
ΩI
F
=3mA,f=100MHz
--1.5
ΩI
F
=10mA,f=100MHz
Conditions
Rf
Reverse current
Parameter
Forward voltage
High frequency res istance
Capacitanc e be tween termina ls
RN262CS
Diodes
2/2
zElectrical characteristic curves (Ta=25°C)
.
FORWARD VOLTAGE：VF(mV)
VF-IF CHARACTERISTICS
FORWARD CURRENT:IF(mA)
REVERSE CURRENT:IR(nA)
REVERSE VOLTAGE：VR(V)
VR-IR CHARACTERISTICS
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
REVERSE VOLTAGE:VR(V)
VR-Ct CHARACTERISTICS
VF DISPERSION MAP
FORWARD VOLTAGE:VF(mV)
REVERSE CURRENT:IR(nA)
IR DISPERSION MAP
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
Ct DISPERSION MAP
ELECTROSTATIC
DISCHARGE TEST ESD(KV)
ESD DISPERSION MAP
FORWARD CURRENT:IF(mA)
rf-IF CHARACTERISTICS
FORWARD OPERATING
RESISTANCE:rf(Ω)
FORWARD CURRENT:IF(mA)
rf DISPERSION MAP
FORWARD OPERATING
RESISTANCE:rf(Ω)
CAPACITANCE BETWEEN
TERMINALS:Ct(pF)
FREQUENCY(MHz)
Ct-f CHARACTERISTICS
FORWARD CURRENT:IF(mA)
rf DISPERSION MAP
FORWARD OPERATING
RESISTANCE:rf(Ω)
0.1
1
10
100
0 100 200 300 400 500 600 700 800 900 1000 1100
0.001
0.01
0.1
1
10
100
1000
0 1020304050
0.01
0.1
1
10
012345678910
f=1MHz
0.1
1
10
100
0.1 1 10
f=10MHz
f=1MHz
f=100MHz
0.1
1
1 10 100 1000
Ta=25℃
VR=0V
810
820
830
840
850
860
AVE:831.3mV
Ta=25℃
IF=10mA
n=30pcs
0
0.1
0.2
0.3
0.4
0.5
Ta=25℃
VR=30V
n=30pcs
AVE:0.05824nA
0
0.1
0.2
0.3
0.4
0.5
AVE:0.256pF
Ta=25℃
f=1MHz
VR=1V
n=10pcs
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
AVE:1.334Ω
Ta=25℃
f=100MHz
IF=3mA
n=10pcs
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
AVE:0.732Ω
Ta=25℃
f=100MHz
IF=10mA
n=10pcs
0
1
2
3
4
5
AVE:0.46kV
AVE:1.67kV
C=100pF
R=1.5kΩ
C=200pF
R=0Ω
Ta=-25℃
Ta=125℃
Ta=75℃
Ta=25℃
Ta=150℃
Ta=25℃
Ta=-25℃
Ta=125℃
Ta=75℃
Ta=150℃
Appendix
Appendix1-Rev1.1
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
