Bulletin I20204 10/96 16F(R) SERIES STANDARD RECOVERY DIODES Stud Version Features 16 A High surge current capability Avalanche types available Stud cathode and stud anode version Wide current range Types up to 1200V VRRM TypicalApplications Battery charges Converters Power supplies Machine tool controls Major Ratings and Characteristics Parameters 16F(R) Units 16 A 140 C 25 A @ 50Hz 350 A @ 60Hz 370 A @ 50Hz 612 A2s @ 60Hz 560 A2 s VRRM range 100 to 1200 V TJ range - 65 to 175 C IF(AV) @ TC IF(RMS) IFSM I2t www.irf.com case style DO-203AA (DO-4) 1 16F(R) Series Bulletin I20204 10/96 ELECTRICAL SPECIFICATIONS Voltage Ratings Type number 16F(R) Voltage VRRM, maximum VRSM, maximum non- VR(BR), minimum IRRM max. Code repetitive peak reverse voltage V repetitive peak reverse voltage V avalanche voltage V @ TJ = 175C 10 100 150 -- 20 200 275 -- 40 400 500 500 60 600 725 750 80 800 950 950 100 1000 1200 1150 120 1200 1400 1350 (1) mA 12 (1) Avalanche version only available from VRRM 400V to 1200V. Forward Conduction Parameter IF(AV) Max. average forward current @ Case temperature IF(RMS) Max. RMS forward current PR Maximum non-repetitive 16F(R) Units Conditions 16 A 140 C 25 A 15 K/W peak reverse power IFSM I t see note (2) 350 t = 10ms non-repetitive surge current 370 t = 8.3ms reapplied t = 10ms 100% VRRM 310 t = 8.3ms reapplied 612 t = 10ms No voltage 560 t = 8.3ms reapplied t = 10ms 100% VRRM t = 8.3ms reapplied 2 Maximum I t for fusing 435 A A2 s 395 I t 2 Maximum I t for fusing 2 V F(TO)1 Low level value of threshold 6120 V F(TO)2 High level value of threshold voltage f1 Low level value of forward A s 2 f2 V FM Max. forward voltage drop Initial TJ = TJ max. t = 0.1 to 10ms, no voltage reapplied (I > x I F(AV)), TJ = TJ max. 0.90 (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 7.80 m High level value of forward slope resistance Sinusoidal half wave, V slope resistance r No voltage (16.7% x x IF(AV) < I < x IF(AV)), TJ = TJ max. 0.77 voltage r DC @ TC = 25C 10s square pulse, TJ = TJ max. Max. peak, one-cycle forward, 295 2 180 conduction, half sine wave (I > x I F(AV)), TJ = TJ max. 5.70 1.23 V I = 50A, TJ = 25C, t = 10ms sinusoidal wave pk p (2) Available only for Avalanche version, all other parameters the same as 16F. 2 www.irf.com 16F(R) Series Bulletin I20204 10/96 Thermal and Mechanical Specifications Parameter 16F(R) TJ Max. junction operating temperature range -65 to 175 T Max. storage temperature range - 65 to 200 stg RthJC Max. thermal resistance, junction to case RthCS Max. thermal resistance, case to heatsink T Mounting torque, 10% Units C 1.6 DC operation K/W 0.5 1.2 Nm (1.5) wt Approximate weight Mounting surface, smooth, flat and greased Lubricated threads (Not lubricated threads) 7 (0.25) Case style Conditions g (oz) DO-203AA (DO-4) See Outline Table RthJC Conduction (The following table shows the increment of thermal resistence RthJC when devices operate at different conduction angles than DC) Conduction angle Sinusoidal conduction 180 0.31 Rectangular conduction Units 0.23 120 0.38 0.40 90 0.49 0.54 60 0.72 0.75 30 1.20 1.21 Conditions TJ = TJ max. K/W Ordering Information Table Device Code 1 - A A 16 F R 120 M 1 2 3 4 5 6 = Avalanche diode None = Standard diode 2 - Current rating: Code = IF(AV) 3 - F 4 - None = Stud Normal Polarity (Cathode to Stud) R = Standard device = Stud Reverse Polarity (Anode to Stud) 5 - Voltage code: Code x 10 = VRRM (See Voltage Ratings table) 6 - None = Stud base DO-203AA (DO-4) 10-32UNF-2A M www.irf.com = Stud base DO-203AA (DO-4) M5 X 0.8 - (Not available for Avalanche diodes) 3 16F(R) Series Bulletin I20204 10/96 Outlines Table Case Style DO-203AA (DO-4) 180 16F(R) Series RthJC (DC) = 1.6 K/W 170 160 Conduction Angle 150 90 140 60 120 30 180 130 0 4 8 12 16 Average Forward Current (A) Fig. 1 - Current Ratings Characteristics 4 20 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) All dimensions in millimeters (inches) 180 16F(R) Series RthJC (DC) = 1.6 K/W 170 160 Conduction Period 150 90 140 60 120 30 180 DC 130 0 5 10 15 20 25 30 Average Forward Current (A) Fig. 2 - Current Ratings Characteristics www.irf.com 16F(R) Series Maximum Average Forward Power Loss (W) Bulletin I20204 10/96 20 R 180 120 90 60 30 16 th SA = 6K /W 4K /W 8K /W 12 -D elt a R 10 K /W RMS Limit 15 K /W 8 20 K/ W Conduction Angle 30 K/W 4 16F(R) Series TJ = 175C 0 0 4 8 12 16 20 0 25 50 75 100 Maximum Allowable Ambient Temperature (C) Average Forward Current (A) Maximum Average Forward Power Loss (W) Fig. 3 - Forward Power Loss Characteristics 25 DC 180 120 90 60 30 20 15 R thS A = 4 6K /W RMS Limit 8K /W K/W -D elt a R 10 K /W 15 K/W 10 20 K/W Conduction Period 30 K/W 5 16F(R) Series TJ = 175C 0 0 5 10 15 20 25 Average Forward Current (A) 0 30 25 50 75 100 Maximum Allowable Ambient Temperature (C) 325 At Any Rated Load Condition And With Rated V RRM Applied Following Surge. Initial TJ = 175C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 300 275 250 225 200 175 16F(R) Series 150 125 1 10 100 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 5 - Maximum Non-Repetitive Surge Current www.irf.com Peak Half Sine Wave Forward Current (A) Peak Half Sine Wave Forward Current (A) Fig. 4 - Forward Power Loss Characteristics 350 325 300 275 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Initial TJ = 175C No Voltage Reapplied Rated VRRM Reapplied 250 225 200 175 150 125 0.01 16F(R) Series 0.1 1 Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current 5 16F(R) Series Bulletin I20204 10/96 Transient Thermal Impedance ZthJC (K/W) Instantaneous Forward Current (A) 1000 TJ = 25C TJ = 175C 100 10 16F(R) Series 1 0 1 2 3 4 5 6 Instantaneous Forward Voltage (V) Fig. 7 - Forward Voltage Drop Characteristics 6 10 Steady State Value RthJC = 1.6 K/W (DC Operation) 1 16F(R) Series 0.1 0.001 0.01 0.1 1 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristics www.irf.com