10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
1
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
1
Features
Saturated Output Power: +41 dBm
Linear Gain: 24 dB
Power Added Efficiency: 30% at PSAT
50 Input / Output Match
Ceramic Flange Mount Package
RoHS* Compliant and 260°C Re-flow Compatible
Description
The MAAP-010168 is a two stage MMIC power
amplifier designed for broadband high power
applications. It can be used as either a driver or an
output stage amplifier. This device is fully matched
input and output to 50 Ω which eliminates any
sensitive external RF tuning components.
The device is packaged in a lead free 10-lead
flanged package for high volume manufacturing.
The MAAP-010168 is fabricated using a high
reliability pHEMT process, to realize good power
added efficiency and gain. The pHEMT process
features full passivation for high performance and
reliability.
Ordering Information1
Part Number Package
MAAP-010168-000000 Bulk
* Restrictions on Hazardous Substances,
European Union Directive 2002/95/EC.
Functional Schematic
Pin No. Function
1 VGG2
2 VGG1
3 RF Input
4 VGG1
5 VGG2
6 VDD1
7 VDD2
8 RF Output
9 VDD2
10 VDD1
Pin Configuration2
1. Reference Application Note M567 for package handling and
mounting procedure. 2. Flange is DC and RF ground.
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
2
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
2
Parameter Test Conditions Units Min. Typ. Max.
Gain Small signal dB 19 24 —
Input Return Loss — dB — 10 —
Output Return Loss — dB — 10 —
P1dB — dBm — 39 —
PSAT — dBm 38 41 —
Current IDQ
PSAT A —
—
3.5
5.5
—-
—
PAE PSAT % — 30 —
Gate Bias — V — -0.7 —
Duty Cycle — % — — 100
Electrical Specifications:
Freq. = 0.5 - 3.0 GHz, VDD = 10 V, IDQ = 3.5 A, TA = 25 °C, Z0 = 50 Ω
Absolute Maximum Ratings3,4,5
Parameter Absolute Maximum
Input Power +24 dBm
Operating Supply Voltage +11 Volts
Operating Gate Voltage -2 Volts
Operating Temperature -40°C to +85°C
Channel Temperature6 +150 °C
Storage Temperature -40°C to +150°C
3. Exceeding any one or combination of these limits may cause
permanent damage to this device.
4. M/A-COM Technology Solutions does not recommend
sustained operation near these survivability limits.
5. Operating at nominal conditions with TJ ≤ +150°C will ensure
MTTF > 1 x 106 hours.
6. Junction Temperature (TJ) = TC + ӨJC * ((V * I) - (POUT - PIN))
Typical thermal resistance (ӨJC) = 2.0°C/W
a) For TC = 25°C @ 1.5 GHz
TJ = +80°C @ +10 V, 4000 mA, POUT = 41 dBm, PIN = 21 dBm
b) For TC = 85°C @ 1.5 GHz
TJ = +138°C @ +10 V, 3900 mA, POUT = 41 dBm, PIN = 21 dBm
Operating the MAAP-010168
The MAAP-010168 is static sensitive. Please
handle with care. To operate the device, follow
these steps. Ramp down or shutdown in reverse
order (gate bias on first and off last). All VGG pins
should have the same voltage applied at all times.
1. Apply VGG (-1.5 V).
2. Apply VDD (10.0 V Typical).
3. Set IDQ by adjusting VGG.
4. Apply RFIN.
Recommended Bias Configuration
10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
3
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
3
Input Return Loss
Gain
Typical Performance Curves
Reverse Isolation
Output Return Loss
Output Power (dBm) Output Power (W)
10
15
20
25
30
35
40
0.5 1.0 1.5 2.0 2.5 3.0
+25 C
-40 C
+85 C
Frequency (GHz)
-20
-15
-10
-5
0
0.5 1.0 1.5 2.0 2.5 3.0
+25 C
-40 C
+85 C
Frequency (GHz)
-20
-15
-10
-5
0
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
-100
-80
-60
-40
-20
0
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
30
35
40
45
50
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
0
5
10
15
20
25
30
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
4
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
4
Typical Performance Curves
Power Gain
Power Added Efficiency
Drain Current
0
10
20
30
40
50
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
0
2
4
6
8
10
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
10
15
20
25
30
0.5 1.0 1.5 2.0 2.5 3.0
+25°C
-40°C
+85°C
Frequency (GHz)
Output Power Sweep @ 0.7 GHz
Output Power Sweep @ 1.5 GHz
Output Power Sweep @ 2.5 GHz
20
24
28
32
36
40
44
0 2 4 6 8 10121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
20
24
28
32
36
40
44
0246810121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
20
24
28
32
36
40
44
0246810121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
5
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
5
Power Gain vs. Output Power @ 0.7 GHz
Typical Performance Curves
Power Gain vs. Output Power @ 1.5 GHz
Power Gain vs. Output Power @ 2.5 GHz
Power Gain vs. Input Power @ 2.5 GHz
Power Gain vs. Input Power @ 1.5 GHz
Power Gain vs. Input Power @ 0.7 GHz
10
15
20
25
30
0 2 4 6 8 10121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
10
15
20
25
30
0 2 4 6 8 10121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
10
15
20
25
30
0 2 4 6 8 10121416182022
+25°C
-40°C
+85°C
Input Power (dBm)
10
15
20
25
30
26 28 30 32 34 36 38 40 42 44
+25°C
-40°C
+85°C
Output Power (dBm)
10
15
20
25
30
35
40
26 28 30 32 34 36 38 40 42 44
+25°C
-40°C
+85°C
Output Power (dBm)
10
15
20
25
30
35
40
26 28 30 32 34 36 38 40 42 44
+25°C
-40°C
+85°C
Output Power (dBm)
10 W Power Amplifier
0.5 - 3 GHz
Rev. V1
MAAP-010168
6
M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice.
Visit www.macom.com for additional data sheets and product information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
6
Ceramic Flange Mount Package†
† Reference Application Note M538 for lead-free solder reflow recommendations.
This is a high frequency, low thermal resistance package. The package consists of a cofired ceramic construction with a copper-tungsten
base and iron-nickel-cobalt leads. The finish consists of electrolytic gold over nickel plate.
Junction Temperature vs. Base Plate Temperature
with 50 W Power Dissipation
Typical Performance Curves
Max. Power Dissipation vs. Base Plate Temperature7
7. Power dissipation should not exceed the maximum plot shown
above to maintain TJ <150°C. It is recommended to monitor
power dissipation and decrease power dissipation in the
device as required.
0
50
100
150
200
250
300
0 15 30 45 60 75 90 105 120 135 150
Base Plate Temperature (°C)
0
10
20
30
40
50
60
0 20 40 60 80 100 120 140 160
Base Plate Temperature (°C)
