Dimensions in millimeters and inches
Conform to JEDEC Outline DO-204AL (DO-41)
CASE STYLE AND DIMENSIONS
Major Ratings and Characteristics
IF(AV) Rectangular 1.1 A
waveform
VRRM 90 / 100 V
IFSM @ tp = 5 µs sine 85 A
VF@ 1 Apk, TJ = 25°C 0.85 V
TJrange - 40 to 150 °C
Characteristics 11DQ.. Units The 11DQ.. axial leaded Schottky rectifier has been optimized for
very low forward voltage drop, with moderate leakage. Typical
applications are in switching power supplies, converters, free-
wheeling diodes, and reverse battery protection.
Low profile, axial leaded outline
High purity, high temperature epoxy encapsulation for
enhanced mechanical strength and moisture resistance
Very low forward voltage drop
High frequency operation
Guard ring for enhanced ruggedness and long term
reliability
Description/ Features
SCHOTTKY RECTIFIER 1.1 Amp
11DQ09
11DQ10
Bulletin PD-2.289 rev. F 06/03
1
www.irf.com
11DQ09, 11DQ10
Bulletin PD-2.289 rev. F 06/03
2www.irf.com
Part number 11DQ09 11DQ10
VRMax. DC Reverse Voltage (V)
VRWM Max. Working Peak Reverse Voltage (V)
Voltage Ratings
90 100
TJ = 25 °C
TJ = 125 °C
VR = rated VR
Parameters 11DQ.. Units Conditions
Electrical Specifications
(1) Pulse Width < 300µs, Duty Cycle <2%
TJMax. Junction Temperature Range (*) -40 to 150 °C
Tstg Max. Storage Temperature Range -40 to 150 °C
RthJA Max. Thermal Resistance Junction 100 °C/W DC operation
to Ambient Without cooling fin
RthJL Typical Thermal Resistance Junction 81 °C/W DC operation (See Fig. 4)
to Lead
wt Approximate Weight 0.33(0.012) g (oz.)
Case Style DO-204AL(DO-41)
Thermal-Mechanical Specifications
Parameters 11DQ.. Units Conditions
IF(AV) Max. Average Forward Current 1.1 A 50% duty cycle @ TC = 75°C, rectangular wave form
* See Fig. 4
IFSM Max. Peak One Cycle Non-Repetitive 85 5µs Sine or 3µs Rect. pulse
Surge Current * See Fig. 6 14 10ms Sine or 6ms Rect. pulse
EAS Non-Repetitive Avalanche Energy 1.0 mJ TJ = 25 °C, IAS
= 0.5 Amps, L = 8 mH
IAR Repetitive Avalanche Current 0.5 A Current decaying linearly to zero in 1 µsec
Frequency limited by TJ max. VA = 1.5 x VR typical
Absolute Maximum Ratings
Following any rated
load condition and with
rated VRRM applied
A
Parameters 11DQ.. Units Conditions
< thermal runaway condition for a diode on its own heatsink
(*) dPtot 1
dTj Rth( j-a)
VFM Max. Forward Voltage Drop 0.85 V @ 1A
* See Fig. 1 (1) 0.96 V @ 2A
0.68 V @ 1A
0.78 V @ 2A
IRM Max. Reverse Leakage Current 0.5 mA TJ = 25 °C
* See Fig. 2 (1) 1.0 mA TJ = 125 °C
CTTypical Junction Capacitance 35 pF VR = 5VDC (test signal range 100Khz to 1Mhz) 25°C
LSTypical Series Inductance 8.0 nH Measured lead to lead 5mm from package body
dv/dt Max. Voltage Rate of Change 10000 V/µs (Rated VR)
11DQ09, 11DQ10
Bulletin PD-2.289 rev. F 06/03
3
www.irf.com
Fig. 1 - Max. Forward Voltage Drop Characteristics
Forward Voltage Drop - VFM (V)
Instantaneous Forward Current - IF (A)
Reverse Voltage - VR (V)
Reverse Voltage - VR (V)
Junction Capacitance - CT (pF)
Fig. 3 - Typical Junction Capacitance
Vs. Reverse Voltage
Fig. 2 - Typical Values Of Reverse Current
Vs. Reverse Voltage
Reverse Current - IR (mA)
0.1
1
10
0 0.4 0.8 1.2 1.
6
T = 150˚C
T = 125˚C
T = 25˚C
J
J
J
0
0.0001
0.001
0.01
0.1
1
10
0 20 40 60 80 100
125˚C
25˚C
T = 150˚C
J
10
100
0 20406080100
T = 25˚C
J
11DQ09, 11DQ10
Bulletin PD-2.289 rev. F 06/03
4www.irf.com
Average Forward Current - IF(AV) (A)
Square Wave Pulse Duration - tp (microsec)
Fig. 6 - Max. Non-Repetitive Surge Current
Allowable Case Temperature (°C)
Non-Repetitive Surge Current - I FSM (A)
Fig. 5- Forward Power Loss
Characteristics
Average Forward Current - IF(AV) (A)
Average Power Loss (Watts)
(2) Formula used: TC = TJ - (Pd + PdREV) x RthJC
;
Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6);
PdREV = Inverse Power Loss = VR1 x IR (1 - D); IR @ VR1
= 80% rated VR
Fig. 4 - Max. Allowable Case Temperature
Vs. Average Forward Current
0
30
60
90
120
150
0 0.3 0.6 0.9 1.2 1.5
DC
see note (2)
Square wave (D = 0.50)
80% Rated V applied
R
0
0.2
0.4
0.6
0.8
0 0.3 0.6 0.9 1.2 1.5
DC
RMS Limit
D = 0.20
D = 0.25
D = 0.33
D = 0.50
D = 0.75
10
100
10 100 1000 10000
RRM
At Any Rated Load Condition
And With Rated Vrrm Applied
Following Surge
11DQ09, 11DQ10
Bulletin PD-2.289 rev. F 06/03
5
www.irf.com
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105
TAC Fax: (310) 252-7309
Visit us at www.irf.com for sales contact information. 06/03
Data and specifications subject to change without notice.
This product has been designed and qualified for Industrial Level.
Qualification Standards can be found on IR's Web site.
Ordering Information Table
Device Code
1524
3
1- 11 = 1.1A (Axial and small packages - Current is x10)
2- D = DO-41 package
3- Q = Schottky Q.. Series
4- 10 = Voltage Ratings
5- TR = Tape & Reel package ( 5000 pcs)
- = Box package (1000 pcs)
11 D Q 10 TR
10 = 100V
09 = 90V
