Series 165, 166 Retainers Series 165 and 166 Retainers Part Number Code WEIGHT .48 g/cm (.043oz/in) 165 or 166 - 06 - 3.25 - N Mounting holes are offset from card path and occur every inch, offering a choice of mounting patterns MATERIALS AND FINISH PCB Thickness 1.6 (.063) ______________________________ 06 2.4 (.094) ______________________________ 09 Material: .41 (.016) thick Beryllium Copper C17510, Temper TF00 per ASTM B534 Finish: See finish table Length 31.75 (1.25) to 311.15 (12.25) ______________________3.25 In 25.4 (1.00) increments Other lengths available on request Finish Coined edges allow Nickel Plate_______________________________________N Or choose from finish table smooth insertion and extraction without SPRING RATE damage to card 56.0 N/cm (32 lbs/in) of deflection per spring finger Independent sections maximize contact with Code Letter printed circuit card [blank] "T" "N" "ZN" "EN" Dash No. B Dimension +0.38 (.015) \-0.0 (.000) PCB Thickness G Dimension +0.0 (.00) \-0.80 (.03) -06 1.6 (1/16) 1.91 (.075) 1.14 (.045) -09 2.4 (3/32) 2.67 (.105) 1.91 (.075) Finish 165/166: no finish Bright Tin plate per Mil-T-10727 .005 (.0002) min. Nickel plate per QQ-N-290 Cl. 1, Gr. F Zinc plate per ASTM-B633 Type III (clear), SC1 Electroless nickel plate per Mil-C-26074 Cl. 1 Gr. B Spring fingers hold card against rigid side providing dampening under shock and vibration Part Number Code Example: Turned in tabs and rigid wall limit card excursion under dynamic loading 85 890664 165 Shown, 166 Opposite 165-06-4.25-T Series 165 BeCu, with bright tin finsh, 107.95 (4.25) long designed for 1.6 (.063) thick printed circuit boards 4.19 (.165)) Length 18.3 (.72) Typ. FINISH TABLE B (see table) G (see table) 7.1 (.28) Typ. .64 (.025) R (inside) Typ. 6.73 (.265) 2.44 .05 (.096 .002) Dia.Typ. Units: mm (in) Unless otherwise specified: .xx .25, .x .5 (.xxx .010, .xx .02) 4.19 (.165) Typ. 19.05 (.750) Typ. 8.18 +.25/-.50 (.322 +.010/-.020) 4.32 .13 (.170 .005) 25.40 .13 (1.000 .005) Tol. Noncum. 3.18 (.125) Typ. Break sharp edges. PCB 4.32 .13 (.170 .005) Recommended Mounting Dim 3.56 (.140 Pentair may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. pentairprotect.com 1-800-854-7086