546 CG01-J
RGLD & RGSD Series
RESISTOR PRODUCTS
RESISTOR NETWORKS
X, Y, M, Z & L TYPES
Murata’s thick film resistor networks are designed to meet
a variety of application requirements in a compact, highly
reliable package. Considerable production economies are also
realized during board assembly since only one component,
consisting of many resistors, has to be inserted in the PC
board. Moreover, it is possible to assemble resistor networks
consecutively with .10 inch pitch mounting holes. Our RGLD
Series is also compatible with all standard DIP package
heights with a maximum seated height of just 5.0mm.
Quality is monitored and controlled in accordance with TQC
(Total Quality Concepts) inspection. The AQL is .25% for value
and tolerance at 25°C and visual marking (major) attributes.
Dimension is .65% AQL and general workmanship is 2.5% AQL.
Murata welcomes the opportunity to aid in the design of
resistor network modules to meet specific requirements
within the overall capabilities described in this catalog.
RGLD 8 X 103 J – 
SERIES Number of CIRCUIT NOMINAL RESISTANCE OTHER
(refer to the table below) resistors TYPE RESISTANCE VALUE TOLERANCE SPECIFICATIONS
The first two digits G: ±2% T11: All pin taping
indicate significant figures J: ±5% T21: 3 pin taping
and last digit indicates
number of zeros that follow
(Unit: ohms)
PART NUMBERING SYSTEM
Height Remarks
Dimensions: mm
RGLD .200/5.0 max. Low Profile
RGSD .250/6.3 max. Medium Profile
Temperature Range: –55°C to +125°C
Resistance Range: 10to 1M
Resistance Tolerance: ±5% (10to 1M)
±2% (22to 1M)
±1% (special order)
Temperature Coefficient: ±200ppm/°C (±100ppm/°C
on special order)
Power Rating: 100% at 70°C
Maximum ambient temperature
at 0 watt is 125°C
Voltage Rating: E = 
PR
E = Voltage rating
P = Power rating
R = Ohmic value
However, not to exceed each
maximum working voltage
ELECTRICAL SPECIFICATIONS
10 15 22 33 47 68
12 18 27 39 56 82
MECHANICAL SPECIFICATIONS
Substrate Material: Alumina
Resistor Material: Cermet
Lead Pull Strength: 2 lbs.
Lead Material/Plating: Iron/Copper & Solder
Coating: Meets UL94V-0 Standards
Coating Material/Color: Epoxy-phenol Resin/Blue
APPLICATIONS
Consumer For digital circuits in color television
sets, video related devices, microwave
ovens, washing machines, air
conditioners, etc.
Industrial For digital circuits such as computers
and terminals, electronic typewriters,
PBX/telecommunications,
programmable controller, measuring
equipment
AVAILABLE CIRCUITS Custom R-Networks are also available. Contact Murata Electronics.
R1
R2
RRR R
2R 2R 2R 2R 2R 2R
X Type Y Type M Type
Z Type L Type
–55 20 70 100 125
Ambient Temperature (°C)
Ratio of Rated Power (%)
100
50
0
Example: 120
, 12K
, 120K
E 24 values are special order.
Power Derating
Characteristics:
E 12 Values
R2
R1
CG01-J 547
RESISTOR PRODUCTS
RESISTOR NETWORKS
X, Y, M, Z & L TYPES RGLD & RGSD Series
DIMENSIONS: mm
• 8 X 103 J 98
Pin 1 index
Number of Resistors
Type (Circuit) Designation
Nominal Resistance Value
(3 digits)
Resistance Tolerance
Manufacturer Logo
Date Code (Year, Mth)
MARKINGS
Part Number* Number of Power Max. Dimensions: mm
Nominal Resistors Ratings Operating
Profile Resistance Value (Number of Each Voltage LH
Resistance Resistor (V)
Tolerance Pins) (W)
COMMON CIRCUIT 3 through 12 Resistors
RGLD 3X3 (4) 10.1
RGLD 4X4 (5) 12.6
RGLD 5X5 (6) 15.1
RGLD 6X6 (7) 17.6
Low RGLD 7X7 (8) 20.2
RGLD 8X8 (9) 1/8 100 22.7 5.0
RGLD 9X9 (10) 25.3
RGLD 10X10 (11) 27.8
RGLD 11X11 (12) 30.5
RGLD 12X12 (13) 33.0
ISOLATED CIRCUIT 3, 4, 5, 6 and 7 Resistors
RGLD 3Y3 (6) 15.1
RGLD 4Y4 (8) 20.2
Low RGLD 5Y5 (10) 1/8 100 25.3 5.0
RGLD 6Y6 (12) 30.5
RGLD 7Y7 (14) 35.5
EVEN PIN VOLTAGE DIVIDER 6, 8, 10 and 12 Resistors
RGLD 6M

6 (7) 17.6
Low
RGLD 8M

8 (9)
1/8 100
22.7
5.0
RGLD 10M
10 (11) 27.8
RGLD 12M
12 (13) 33.0
DUAL TERMINATOR CIRCUIT 8 through 18 Resistors
RGLD 8Z 8 (6) 15.1
RGLD 10Z 10 (7) 17.6
Low RGLD 12Z 12 (8) 1/8 100 20.2 5.0
RGLD 14Z 14 (9) 22.7
RGLD 16Z 16 (10) 25.3
RGLD 18Z18 (11) 27.8
LADDER CIRCUIT (R/2R) 8 through 16 Resistors
RGSD 8LG8 (6) 15.1
RGSD 10LG10 (7) 17.6
Medium
RGSD 12LG12 (8) 1/32 100 20.2 6.3
RGSD 14LG14 (9) 22.7
RGSD 16LG16 (10) 25.3
L max.
2.5 max.
H max.
P
0.5 0.25
P x (number of
Pins – 1) ± 0.3
P = 2.54 ± 0.2
RRRRR
123 45n + 1
1234
R
2n – 1
RR
2n
n: Number of resistors
n: Number of resistors
X Type
Y Type
R2
R
12345n + 1
R2R2
R1
n
R1
n: Number of resistors
M Type
R1R1R1
R2R2R2R2
R1
12 3 4 n + 1
2
n + 2
2
n: Number of resistors
Z Type*
2R
12 34 n
2
2R 2R 2R 2R 2R 2R
RRR R
n + 1
2
n + 1
2
n: Number of resistors
*Besides normal Resistor characteristics, linearity within ±1/2LSB is guaranteed. *=R1,  =R2*Max. “R” value is 100k. Tolerance of resistance is only G (±2%).
*Standard Resistance Value for Z Type () is R1/R2=180/390, 220/330, 330/390, 330/471, other values are special order.
L Type*
3.5 ± 0.5
RESISTOR
PRODUCTS
548 CG01-J
RESISTOR PRODUCTS
RESISTOR NETWORKS
TAPING & PACKAGING SPECIFICATIONS RGLD & RGSD Series
TAPING SPECIFICATIONS DIMENSIONS: mm
All Pin Taping –T11
3 Pin Taping –T21
5 ~ 8 Pins 9 ~ 10 Pins
6 pins
5 pins
8 pins
7 pins
25.4 ± 1.0
4.0 ± 0.3
2.54 ± 0.5 2.54 ± 0.5
12.7 ± 0.3 12.7 ± 0.3
18.0 ± 0.5
6.0 1.0 ± 0.1
9.0 ± 0.5
16.0 ± 0.5
10 pins
9 pins
5.08 ± 0.5 5.08 ± 0.5
38.1 ± 1.0
0 ± 2.0
H max.
4 pins
5 pins
8 pins
7 pins
25.4 ± 1.0
␾4.0 ± 0.3
6.35 ± 0.5
12.7 ± 0.3
18.0 ± 0.5
6.0
1.0 ± 1.0
9.0 ± 0.5
16.0 ± 0.5
6 pins
9 pins
3.0 ± 0.3
0 ± 2.0
5.0 max.
12.7 ± 0.3
4 ~ 9 Pins
Type Number of Pins H L
T11 5 to 8 200 40
9 to 10 290
T21 4 to 9 210 45
STANDARD FLATPACK PACKAGING QUANTITY
1000 pcs./case
PACKAGE AND MARKING
H, L (Height and Length: mm)
Standard Quantity Series
RGSD RGLD
250 pcs. 7 pin min. 10 pin min.
500 pcs. 6 pin max. 9 pin max.
PACKAGING: BULK
Bulk parts are packaged in polyethylene bag.
Standard quantity per polyethylene bag:
MURATA ELECTRONICS NORTH AMERICA, INC.
330 max.
L max.
H max.