CSD04060-Silicon Carbide Schottky Diode Zero R ecovery(R) VRRM Rectifier IF(AVG) = 4 A Qc Features * * * * * * * = 600 V = 9 nC Package 600-Volt Schottky Rectifier Zero Reverse Recovery Current Zero Forward Recovery Voltage High-Frequency Operation Temperature-Independent Switching Behavior Extremely Fast Switching Positive Temperature Coefficient on VF TO-252-2 TO-220-2 Benefits * * * * * Replace Bipolar with Unipolar Rectifiers Essentially No Switching Losses Higher Efficiency Reduction of Heat Sink Requirements Parallel Devices Without Thermal Runaway PIN 1 CASE PIN 2 Applications * * * Switch Mode Power Supplies Power Factor Correction - Typical PFC Pout : 400W-800W Motor Drives - Typical Power : 0.5HP-2HP Part Number Package Marking CSD04060A TO-220-2 CSD04060 CSD04060E TO-252-2 CSD04060 Maximum Ratings Q D04060 Rev. Datasheet: CS Symbol Parameter Value Unit Test Conditions VRRM Repetitive Peak Reverse Voltage 600 V VRSM Surge Peak Reverse Voltage 600 V VDC DC Blocking Voltage 600 V 4 7 A TC=150C TC=125C 10 A TC=125, TREP<1 mS, Duty=0.5 17.5 12.5 A TC=25C, tP=10 ms, Half Sine Wave TC=125C, tP=10 ms, Half Sine Wave IF(AVG) Average Forward Current IF(PEAK) Peak Forward Current IFRM Repetitive Peak Forward Surge Current IFSM Non-Repetitive Peak Forward Surge Current 38 A TC=25C, tP=1.5 ms, Half Sine Wave IFSM Non-Repetitive Peak Forward Surge Current 110 A TC=25C, tP=10 s, Pulse Ptot Power Dissipation 62.5 20.8 W TC=25C TC=125C -55 to +175 C 1 8.8 Nm lbf-in TJ , Tstg Operating Junction and Storage Temperature TO-220 Mounting Torque Subject to change without notice. www.cree.com Note M3 Screw 6-32 Screw 1 Electrical Characteristics Symbol Parameter Typ. Max. Unit Test Conditions VF Forward Voltage 1.5 2.0 1.8 2.4 V IF = 4 A TJ=25C IF = 4 A TJ=175C IR Reverse Current 25 50 200 1000 A VR = 600 V TJ=25C VR = 600 V TJ=175C QC Total Capacitive Charge 9 nC VR = 600 V, IF = 4A di/dt = 500 A/s TJ = 25C C Total Capacitance 220 26 20 pF VR = 0 V, TJ = 25C, f = 1 MHz VR = 200 V, TJ = 25C, f = 1 MHz VR = 400 V, TJ = 25C, f = 1 MHz Note Note: 1. This is a majority carrier diode, so there is no reverse recovery charge. Thermal Characteristics Symbol RJC Parameter Thermal Resistance from Junction to Case Typ. Unit 2.4 C/W Typical Performance 100 8 90 7 80 6 IR Reverse Current (A) IF Forward Current (A) 70 5 4 3 2 60 50 40 30 20 1 10 0 0 1.0 2.0 3.0 4.0 VF Forward Voltage (V) Figure 1. Forward Characteristics 2 CSD04060 Rev. Q 0 0 100 200 300 400 500 600 700 VR Reverse Voltage (V) Figure 2. Reverse Characteristics Typical Performance Current Derating 47.5 45.0 45 42.5 40 40.0 37.5 35.0 35 32.5 30 30.0 27.5 25 25.0 22.5 20 20.0 17.5 15 15.0 12.5 10.0 10 7.5 5.0 5 2.5 0 0.0 160 140 120 10% 30% 50% 70% DC C Capacitance (pF) Peak Forward Current IF(PEAK) Peak Forward Current (A) 50.0 50 Duty* Duty* Duty* Duty* 100 80 60 40 20 25 25 0 50 75 100 125 150 175 200 50 75 100 125 150 175 200 1 Case Temperature TC Case Temperature (C) DC 70% Duty 50% Duty * Frequency > 1KHz 30% Duty 10 100 1000 VR Reverse Voltage (V) 10% Duty Figure 3. Current Derating Figure 4. Capacitance vs. Reverse Voltage 1.0E+01 Zth (C/W) 1.0E+00 1.0E-01 1.0E-02 1.0E-03 1.E-07 1.E-06 1.E-05 1.E-04 1.E-03 Tim e (s) Figure 5. Transient Thermal Impedance 3 CSD04060 Rev. Q 1.E-02 1.E-01 1.E+00 Typical Performance 80.000 80 70 70.000 Power Dissipation (W) 60 60.000 50 50.000 40 40.000 30 30.000 20 20.000 10.000 10 0 0.000 25 50 75 100 125 150 175 25 50 75 100 125 150 175 TC Case Temperature (C) Figure 6. Power Derating 4 CSD04060 Rev. Q Package Dimensions Inches POS Package TO-220-2 A B A F J C P B D X S E 1 2 G T Z L M W N PIN 1 CASE PIN 2 9.677 10.414 .235.590 .255 .615 5.969 FC D .102.143 .112 2.591 .153 .337 .337 8.560 1.105 1.147 .590 .610 14.986 .500 .550 .149 .153 3.785 R1.147 0.19728.626 1.127 E F JG V .410 EB LH H Max .381 DA H U Min .255 5.969 M illim eters .120 2.540 M in M ax .337 5.664 10.033 10.414 G Y Max .235 Inc hes .100 M in M ax .395.223 .410 C P OS Q Millimeters Min 14.986 6.477 6.477 3.048 8.560 15.621 2.845 3.632 3.886 8.560 28.067 29.134 15.494 12.700 13.970 3.886 R 0.197 29.134 MJ L N M PN .530.025 .550 R 0.010 .045 .028 .036 .195 .045 .055 .195.165 .205 13.462 13.970 .036 .635 R 0.254 .055 1.143 .711 .914 .205 4.953 1.143 1.397 .185 4.191 4.953 5.207 QP .170.048 .180 .054 4.318 1.219 4.572 1.372 SQ S T T U U VV .048 3 .054 3 5 3 3 5 3 3 5 .100.094 .110 1.219 6 3 6 3 6 3 .110 2.54 1.3713 5 3 5 3 5 2.388 2.794 6 WW XX .014.014 .021 3 3 5 .356 .025 3 5.5 .533 .356 5 3 Y z Y Z .395 .410 .385 .130 .150 .130 10.033 .410 3.302 .150 10.414 9.779 3.810 3.302 .914 1.397 5.207 4.699 6 6 2.794 .635 5.5 10.414 3.810 NOTE: 1. Dimension L, M, W apply for Solder Dip Finish Package Dimensions Package TO-252-2 * POS Inches Millimeters Min Max Min Max A .255 .265 6.477 6.731 B .197 .205 5.004 5.207 C .027 .033 .686 .838 D* .270 .322 6.858 8.179 E .178 .182 4.521 4.623 F .025 .035 .635 .889 G 44 46 44 46 H .382 .397 9.703 10.084 J .090 TYP 2.286 TYP K 6 8 6 8 L .086 .094 2.184 2.388 M .030 .034 .762 .864 N .040 .044 1.016 1.118 P .235 .245 5.969 6.223 Q 0.00 .004 0.00 .102 R R0.01 TYP .017 .023 .428 .588 T .040 .044 1.016 1.118 U .021 .027 .534 1.118 Note: * Tab "D" may not be present 5 CSD04060 Rev. Q R0.31 TYP S Recommended Solder Pad Layout .08 .26 TO-220-2 TO-252-2 Part Number Package Marking CSD04060A TO-220-2 CSD04060 CSD04060E TO-252-2 CSD04060 Diode Model Diode Model CSD04060 Vf T = VT + If*RT VT= 0.965 + (Tj * -1.3*10-3) RT= 0.096 + (Tj * 1.06*10-3) Note: Tj = Diode Junction Temperature In Degrees Celcius VT RT "The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials in this product are below the maximum concentration values (also referred to as the threshold limits) permitted for such substances, or are used in an exempted application, in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006. This part number was released previously with Sn/Pb solder plating as a standard industry finish. For more information please contact power_sales@cree.com " This product has not been designed or tested for use in, and is not intended for use in, applications implanted into the human body nor in applications in which failure of the product could lead to death, personal injury or property damage, including but not limited to equipment used in the operation of nuclear facilities, life-support machines, cardiac defibrillators or similar emergency medical equipment, aircraft navigation or communication or control systems, air traffic control systems, or weapons systems. Copyright (c) 2006-2009 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo, and Zero Recovery are registered trademarks of Cree, Inc. 6 CSD04060 Rev. Q Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5451 www.cree.com/power