19-213 USRC/S259/TR8 - EVERLIGHT ELECTRONICS

1

www.everlight.com

S

MD  B

19-213USRC/S259/TR8

Features

․Package in 8mm tape on 13〞diameter reel.

․Compatible with autom ati c placem ent equipment.

․Compatible with infr ared and va por phas e reflo w sol der proc ess .

․Mono-color t ype.

․Pb-free.

․The product itself will remain within RoHS compliant version.

․Compliance with EU REACH

․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm).

Description

․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing

density, reduced storage space and finally smaller equipment to be obtained.

․Besides, lightweight makes them ideal for miniature applications. etc.

Applications

․Backlighting in dashboard and switch.

․Telecommunication: indicator and backlighting in telephone and fax.

․Flat backlight for LCD, switch and symbol.

․General use.

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

2

www.everlight.com

Device Selection Guide

Chip

Materials Emitted Color Resin Color

AIGaInP Dark - Red Wa ter Clear

Absolute Maximum Ratings (Ta=25 )℃

Parameter Symbol Rating Unit

Reverse Voltage V

R

5 V

Forward Current I

F

25 mA

Peak Forward Current

(Duty 1/10 @1KHz) I

FP

60 mA

Power Dis s ipatio n Pd

60 mW

Electrostatic Discharge

ESD

HBM

2000 V

Operating Temperature T

opr

-40 ~ +85 ℃

Storage Temperature Tstg -40 ~ +90 ℃

Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.

Hand Soldering : 350 ℃ for 3 sec.

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

3

www.everlight.com

Electro-Optical Characteristics (Ta=25 )℃

Parameter Symbol Min. Typ. Max. Unit Condition

Luminous

Intensity Iv 18.0 ----- 45.0 mcd

I

F

=10mA

Viewing Angle 2θ

1/2

----- 120 ----- deg

Peak

Wavelength λp ----- 639 ----- nm

Dominant

Wavelength λd 625 ----- 635 nm

Spectrum

Radiation

Bandwidth

△

λ ----- 20 ----- nm

Forward

Voltage V

F

1.80 ----- 2.25 V

Reverse

Current I

R

----- ----- 10 μA V

R

=5V

Note:

1.Tolerance of Luminous Intensity: ±11%

2.Tolerance of Dominant Wavelength ±1nm

3. Tolerance of Forward Voltage: ±0.1V

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

4

www.everlight.com

Bin Range of Luminous Intensity

Bin Code Min. Max. Unit Condition

M 18.0 28.5

mcd I

F

=10mA

N 28.5 45.0

Bin Range Of Dom. Wavelength

Bin Code Min. Max. Unit Condition

1 625 630

nm I

F

=10mA

2 630 635

Bin Range Of Forward Voltage

Bin Code Min. Max. Unit Condition

1 1.80 1.95

V I

F

=10mA

2 1.95 2.10

3 2.10 2.25

Note:

1.Tolerance of Luminous Intensity: ±11%

2.Tolerance of Dominant Wavelength ±1nm

3. Tolerance of Forward Voltage: ±0.1V

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

5

www.everlight.com

Typical Electro-Optical Characteristics Curves

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

6

www.everlight.com

Package Dimension

Cathode Mark

Note: Tolerances unless mentioned ±0.1mm. Unit = mm

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

7

www.everlight.com

Moisture Resistant Packing Materials

Label Explanation

‧CPN: Customer’s Product Number

‧P/N: Product Number

‧QT Y: Packing Quant ity

‧CAT: Luminous Intensity Rank

‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank

‧REF: Forward Voltage Rank

‧LOT No: Lot Number

Reel Dimensions

10

9

8

7

6

5

4

3

2

1

2

1

12

1

10

9

8

7

6

5

4

3

1

2

17

1

6

1

5

14

1

3

06

PS

Note: The tolerances unless mentio ned is ±0.1mm ,Unit = mm

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

8

www.everlight.com

Carrier Tape Dimensions: Loaded quantity 10000 PCS per reel

Note: The tolerances unless mentio ned is ±0.1mm ,Unit = mm

Moisture Resistant Packaging

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

9

www.everlight.com

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection, otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.

If unused LEDs remain, it should be stored in moisture proof packages.

2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition

3.1 Pb-free solder temperature profile

Pre-heating

150~200°C

60~120sec.

A bove 217°C

60~150sec.

260°C M ax.

10sec. M ax.

6°C/sec.Max.

Above255°C

30sec.Max.

3°C/sec.Max.

3.2 Reflow soldering should not be done more than two times.

3.3 When solderi ng, do not put stres s on the LEDs duri ng heat ing.

3.4 After soldering, do not warp the circuit board.

4.Soldering Iron

Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less

than the soldering iron capacity 25W . Leave two seconds and more intervals, and do soldering of each terminal. Be careful

because the damage of the product is often started at the time of the hand solder.

5.Repairing

Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head

soldering iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs

will or will not be damaged by repairing.

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

10

www.everlight.com

Application Restrictions

High reliability applications such as military/aerospace, automotive safety/security systems,

and medical equipment may require different product. If you have any concerns, please contact

Everlight before using this product in your application. This specification guarantees the quality

and performance of the product as an individual component. Do not use this product beyond the

specification described in this document.

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)

DATASHEET

SMD  B

19-213USRC/S259/TR8

11

www.everlight.com

DISCLAIMER

1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification.

2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of

shipment.

3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values.

4. W hen using this product, p lease ob serve th e absolute maxim um ratings an d the i nstructions for usi ng outlin ed

in these spec ific ation sheets. EV ERLIG HT assum e s no res ponsib ilit y for an y da m age resulti ng fr om the us e of

the product which does not comply with the absolute maximum ratings and the instructions included in these

specification sheets.

5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any

form is prohibited without obtaining EVERLIGHT’s prior consent.

6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving

applications or any other application which can result in human injury or death. Please contact authorized

Everlight sales agent for special application request.

Ver.:3 Release Date:05/12/2017 狀態:Approved(正式發行)