2609 Bartram Road • Bristol, PA 19007-6810 USA
TEL 215-781-9956 • FAX 215-781-9845
WWW.ARIESELEC.COM • INFO@ARIESELEC.COM
12013
Rev. 5.1
1 of 1
CUSTOMIZATION: ARIES SPECIALIZES IN CUSTOM DESIGN AND PRODUCTION.
SPECIAL MATERIALS, PLATINGS, SIZES, AND CONFIGURATIONS CAN BE
FURNISHED, DEPENDING ON QUANTITY.
ARIES RESERVES THE RIGHT TO CHANGE PRODUCT GENERAL SPECIFICATIONS
WITHOUT NOTICE
PRINTOUTS OF THIS DOCUMENT MAY BE OUT-OF-DATE AND SHOULD BE
CONSIDERED UNCONTROLLED
ALL DIMENSIONS: INCHES [MILLIMETERS]
ALL TOLERANCES: ±0.005 [0.13] UNLESS OTHERWISE SPECIFIED
FOR SOCKETS WITH WIRE WRAP PINS, SEE DATA SHEETS 12014
CONSULT FACTORY FOR OTHER SIZES AND CONFIGURATIONS
FEATURES
• RowsofSocketStripsmaybeMountedonAnyCentersandareEnd-to-endorSide-to-sideStack-
ablefor0.100[2.54]GridorMatrixPatterns
• AvailablewithSolderPinTailsorWireWrapPins
• SocketStripscanbeCuttotheDesiredNumberofPositionswith“break”Feature
GENERAL SPECIFICATIONS
• BODY MATERIAL:BlackUL94V-0Glass-filled4/6Nylon
• PIN BODY:Brass3601/2-hardperUNSC36000ASTMB16/B16M-05
• PIN BODY PLATING:10µ[0.25µ]min.AuperMIL-G-45204–OR–200µ[5.08µ]
min.93/7Sn/PbperASTMB545–OR–200µ[5.08µ]min.SnperASTMB545
Type1over100µ[2.54µ]min.NiperSAEAMS-QQ-N-290B
• 4-FINGER COLLET CONTACT:BeCuperUNSC17200ASTMB194-08
• CONTACT PLATING:200µ[5.08µ]min.93/7Sn/PbperASTMB545–OR– 200µ
[5.08µ]min.SnperASTMB545Type1–OR–10µ[0.25µ]AuperMIL-G-45204
over50µ[1.27µ]min.[1.27µ]NiperSAEAMS-QQ-N-290heavy30µ[0.76µ]
• CONTACT CURRENT RATING:3amps
• INSERTION FORCE:180g/pin,basedon0.018[0.46]dia.testlead
• WITHDRAWAL FORCE:90g/pin,basedon0.018[0.46]dia.testlead
• NORMAL FORCE:140g/pin,basedon0.018[0.46]dia.testlead
• OPERATING TEMPERATURE:221°F[105°C]forSnandSn/Pb;257°F[125°C]for
Auplating
• ACCEPTS LEADS:0.015-0.025[0.38-0.64]dia.,0.100-0.146[2.54-3.71]long
MOUNTING CONSIDERATIONS
• SUGGESTED PCB HOLE SIZE:0.030±0.002[0.76±0.05]dia.
Series 0513 Pin-Line™ Socket Strips
w/Collet Contacts & Solder Pin Tails
ORDERING INFORMATION
XX 0513-X XX XX
Additional Plating
H=heavyAuonCollet
T=SnCollet/SnShell
TL=Sn/PbCollet,Sn/PbShell
Plating
0=AuCollet/SnShell
0TL=AuCollet/Sn/PbShell
1=AuCollet/AuShell
Termination
1=SolderPinTail
Series
2=0.200[5.08]
3=0.300[7.62]
4=0.400[10.16]
6=0.600[15.24]
9=0.900[22.86]
No. of Pins
(1thru25)