For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
1
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Functional Diagram
Features
Support for IEEE Channel Plan
EIRP: 23.5 dBm
Output Power: 16 dBm
Antenna Gain: 7.5 dBi
Max Gain: 38 dB
Gain Control Range: 17 dB
Integrated Frequency Synthesizer
Integrated Image Reject Filter
Programmable IF Gain Block
Universal Analog I/Q Baseband Interface
Three-Wire Serial Digital Interface
7x11mm QFN Package: 77mm2
Typical Applications
The HMC6000LP711E is ideal for:
• WiGig Single Carrier Modulations
• 60 GHz ISM Band Data Transmitter
• Multi-Gbps Data Communications
• High Denition Video Transmission
• RFID
General Description
The HMC6000LP711E is a complete mmWave
transmitter IC and low prole antenna integrated
in a plastic 7x11 mm surface mount package. The
transmitter provides 23.5 dBm of EIRP operating over
57 - 64 GHz with 1.8 GHz of modulation bandwidth.
An integrated synthesizer provides tuning in 500
or 540 MHz step sizes depending on the choice of
external reference clock. Support for a wide variety
of modulation formats is provided through a universal
analog baseband IQ interface. Together with the
HMC6001LP711E, a complete transmit/receive
chipset is provided for multi-Gbps operation in the
unlicensed 60 GHz ISM band.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
2
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 1. Electrical Specications, TA = +25° C, See Test Conditions
Parameter Condition Min. Typ. Max. Units
Frequency Range 57 64 GHz
Frequency Step Size 308.5714 MHz Ref Clk 0.54 GHz
Frequency Step Size 285.714 MHz Ref Clk 0.50 GHz
Modulation Bandwidth 3dB BW, double-sided 1.8 GHz
Max Gain Pout measured at IC, minus total Pin of all
4 baseband inputs [1]
38 dB
Gain Control Range 17 dB
Gain Step Size 1.3 dB
EIRP [2] Combined Psat and antenna peak gain
measured on evaluation board
23.5 dBm
P1dB Pout measured at IC [1] 11 dBm
Psat Pout measured at IC [1] 16 dBm
Antenna Gain Antenna measured on evaluation board 7.5 dBi
Image Rejection 34 dB
Sideband Suppression 20 dB
Carrier Suppression 20 dB
3xLO Suppression 32 dBc
Phase Noise @ 100 kHz -72 dBc/Hz
Phase Noise @ 1 MHz -86 dBc/Hz
Phase Noise @ 10 MHz -111 dBc/Hz
Phase Noise @ 100 MHz -125 dBc/Hz
Phase Noise @ 1 GHz -127 dBc/Hz
PLL Loop BW Internal Loop Flter 200 kHz
Power Dissipation 0.8 W
[1] Measurement does not include antenna gain.
[2] Effective Isotropic Radiated Power (EIRP)
Table 2. Test Conditions
Reference frequency 308.5714 MHz
Temperature +25°C
Gain Setting Max
Input Signal Level -31 dBm @ each of the 4 baseband inputs
IF Bandwidth Max
Input Impedance 100 Differential
Output Impedance 100 Differential
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
3
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 3. Recommended Operation Conditions
Description Symbol Min Typical Max Units
Analog Ground GND 0Vdc
Power Supplies
VCC_PA1
VCC_PA 2 3.9 4.0 4.1 Vdc
VDD_PA
VCC_DRV
VCC_TRIP
VCC_DIV
VCC_REG
VCC_IF
VCC_MIX
2.565 2.7 2.835 Vdc
VDD_PLL 1.3 1.35 1.48 Vdc
VDDD
Input Voltage Ranges
Serial Digital Interface – Logic High
DATA
ENABLE
CLOCK
RESET
0.9 1.2 1.4 V
Serial Digital Interface – Logic Low
DATA
ENABLE
CLOCK
RESET
-0.05 0.1 0.3 V
Reference Clock REFCLKP
REFCLKM
3.3 or 2.5V
LVPECL /LVDS
1.2V CMOS
V
Baseband I and Q [1][2]
BB_IM
BB_IP
BB_QM
BB_QP
525 100 mVp-p
Baseband I and Q Common mode 1.6 V
MSK Data [2]
FMM_I
F MP_ I
FMM_Q
FMP_ Q
200 500 750 mVp-p
MSK Common mode 1.1 V
Input Resistance
DATA
ENABLE
CLOCK
RESET
>50 kOhms
REFCLKP / M 50 Ohm
Temperature -40 +85 C
[1] Values above 25 mVp-p are to be used only with IF attenuation to keep the Pout below 16 dBm
[2] Baseband voltage at each of the four baseband inputs.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
4
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 4. Power Consumption
Voltage Typical Current (mA) Typical Power Consumption (Watts)
VCC_PA1 (4.0Vdc) 33 0.27
VCC_PA 2 (4.0Vdc) 33
VCC_REG (2.7Vdc) 12
0.53
VCC_DRV1 (2.7Vdc) 16
VCC_DRV2 (2.7Vdc) 16
VCC_MIX (2.7Vdc) 29
VCC_IF (2.7Vdc) 31
VCC_TRIP (2.7Vdc) 48
VCC_DIV (2.7Vdc) 35
VDD_PA (2.7Vdc) 6
VDDD (1.35Vdc) <1 0.01
VDD_PLL (1.35Vdc) 8
Figure 1. EIRP vs.
Frequency at Maximum Gain[1][2]
Figure 2. Antenna Peak Gain vs.
Frequency[2]
Figure 3. Antenna Gain vs.
E-Plane Angle[2]
Figure 4. Antenna Gain vs.
H-Plane Angle[2]
0
2
4
6
8
10
12
14
16
18
20
22
24
57.2 58.3 59.4 60.4 61.5 62.6 63.7
Pin = -40 dBm
Pin = -31 dBm
Pin = -22 dBm
EIRP (dBm)
FREQUENCY (GHz)
0
2
4
6
8
10
12
14
16
18
57.2 58.3 59.4 60.4 61.5 62.6 63.7
GAIN (dBi)
FREQUENCY (GHz)
[1] Effective Isotropic Radiated Power (EIRP) with input power of -40, -31, and -22dBm applied at each of the 4 baseband inputs, calculated at peak
antenna gain.
[2] Antenna patterns and gain are measured on packages mounted on the Evaluation PCB Daughtercard (see p. 10).
-20
-15
-10
-5
0
5
10
0
30
60
90
120
210
240
270
300
330
60GHz
COS^2
GAIN (dBi)
-20
-15
-10
-5
0
5
10
0
30
60
90
120
210
240
270
300
330
60GHz
COS^2
GAIN (dBi)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
5
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Figure 5. Output Power vs.
Frequency at Maximum Gain[3][4]
Figure 6. P1dB vs.
Frequency Over Temperature[4]
Figure 7. P1dB vs.
Frequency Across Voltage[4]
Figure 8. 58.32 GHz (IEEE CH-1)
Output Power vs. IF Gain Setting[3][4]
Figure 9. 60.48 GHz (IEEE CH-2)
Output Power vs. IF Gain Setting[3][4]
Figure 10. 62.64 GHz (IEEE CH-3)
Output Power vs. IF Gain Setting[3][4]
[3] Input power of -40, -31, and -22dBm applied at each of the 4 baseband inputs.
[4] Measured without antenna gain.
-16
-12
-8
-4
0
4
8
12
16
20
012345678910111213
Pin = -40dBm
Pin = -31dBm
Pin = -22dBm
OUTPUT POWER (dBm)
IF ATTENUATOR SETTING
0
2
4
6
8
10
12
14
16
18
20
57.2 58.3 59.4 60.4 61.5 62.6 63.7
Pin = -40 dBm
Pin = -31 dBm
Pin = -22 dBm
OUTPUT POWER (dBm)
FREQUENCY (GHz)
0
2
4
6
8
10
12
14
16
18
57.2 58.3 59.4 60.4 61.5 62.6 63.7
Min bias
Typical bias
Max bias
P1dB (dBm)
FREQUENCY (GHz)
-16
-12
-8
-4
0
4
8
12
16
20
012345678910111213
Pin=-40dBm
Pin=-31dBm
Pin=-22dBm
OUTPUT POWER (dBm)
IF ATTENUATOR SETTING
-16
-12
-8
-4
0
4
8
12
16
20
012345678910111213
Pin=-40dBm
Pin=-31dBm
Pin=-22dBm
OUTPUT POWER (dBm)
IF ATTENUATOR SETTING
0
2
4
6
8
10
12
14
16
18
57.2 58.3 59.4 60.4 61.5 62.6 63.7
+25C
+85C
-40C
P1dB (dBm)
FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
6
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Figure 11. Gain vs.
Frequency Over Temperature[4][5]
Figure 12. Sideband Suppression vs.
Frequency Over Temperature[6][7][8]
Figure 13. Sideband Suppression vs.
Frequency Across Voltage [6][7][8]
Figure 14. Image Rejection vs.
Frequency Over Temperature[6][8]
Figure 15. Image Rejection vs.
Frequency Across IF Gain[8]
Figure 16. Carrier Suppression vs.
Frequency Over Temperature[6][8]
[4] Measured without antenna gain.
[5] Input power of -40dBm applied at each of the 4 baseband inputs, Gain=Pout at the IC, minus total Pin of all 4 baseband inputs.
[6] Specied at max gain settings.
[7] Specied at sideband offset = 100MHz.
[8] Input power of -31dBm applied at each of the 4 baseband inputs.
0
5
10
15
20
25
30
57.2 58.3 59.4 60.5 61.6 62.6 63.7
Min. bias
Typical bias
Max. bias
SIDEBAND SUPPRESSION (dBc)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
57.2 58.3 59.4 60.4 61.5 62.6 63.7
IF Attn = 0dB
IF Attn = 5dB
IF Attn = 10dB
IF Attn = 15dB
IMAGE SUPPRESSION (dBc)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
45
50
57.2 58.3 59.4 60.4 61.5 62.6 63.7
+25C
+85C
-40C
GAIN (dB)
FREQUENCY (GHz)
0
5
10
15
20
25
30
57.2 58.3 59.4 60.5 61.6 62.6 63.7
+25C
+85C
-40C
SIDEBAND SUPPRESSION (dBc)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
45
57.2 58.3 59.4 60.4 61.5 62.6 63.7
+25C
+85C
-40C
IMAGE SUPPRESSION (dBc)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
57.2 58.3 59.4 60.5 61.6 62.6 63.7
+25C
+85C
-40C
CARRIER SUPPRESSION (dBc)
FREQUENCY (GHz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
7
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Figure 17. 3x LO Suppression vs.
Frequency Over Temperature[6][9]
Figure 18. 3x LO Suppression vs.
Frequency Across IF Gain[8]
Figure 19. 2xLO vs.
Frequency Across IF Gain[8]
Figure 20. Phase Noise vs.
Frequency Offset Over Temperature[10]
Figure 21. Phase Noise vs.
Frequency Offset Over Voltage[10]
[6] Specied at max gain settings.
[8] Input power of -31dBm applied at each of the 4 baseband inputs.
[9] Input power applied at each of the 4 baseband inputs: -22dBm (+25C), -31dBm (+85C), -40dBm (-40C).
[10] Measured with a 60.48 GHz carrier.
0
5
10
15
20
25
30
35
40
45
50
57.2 58.3 59.4 60.4 61.5 62.6 63.7
IF Attn = 0dB
IF Attn = 5dB
IF Attn =10dB
IF Attn = 15dB
3xLO SUPPRESSION (dBc)
FREQUENCY (GHz)
0
5
10
15
20
25
30
35
40
45
50
55
60
57.2 58.3 59.4 60.4 61.5 62.6 63.7
IF Attn = 0dB
IF Attn = 5dB
IF Attn =10dB
IF Attn = 15dB
2xLO SUPPRESSION (dBc)
FREQUENCY (GHz)
-130
-125
-120
-115
-110
-105
-100
-95
-90
-85
-80
-75
-70
-65
-60
10
3
10
4
10
5
10
6
10
7
10
8
10
9
Min. bias
Typical bias
Max. bias
PHASE NOISE (dBc/Hz)
FREQUENCY (Hz)
0
5
10
15
20
25
30
35
40
45
50
55
60
57.2 58.3 59.4 60.4 61.5 62.6 63.7
+25C
+85C
-40C
3xLO SUPPRESSION (dBc)
FREQUENCY (GHz)
-135
-130
-125
-120
-115
-110
-105
-100
-95
-90
-85
-80
-75
-70
-65
-60
10
3
10
4
10
5
10
6
10
7
10
8
10
9
+25C
+85C
-40C
PHASE NOISE (dBc/Hz)
FREQUENCY (Hz)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
8
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 5. Absolute Maximum Ratings
VCC_PA = 4 V 4.2 Vdc
VDD = 2.7 V 2.85 Vdc
VCC = 2.7 V 2.85 Vdc
VDD_PLL = 1.35 V 1.6 Vdc
VDDD = 1.35 V 1.6 Vdc
GND 0± 50 mV
Junction Temperature 125°C
Continuous Pdiss (T=85°C)
(derate 29mW/°C above 85°C) 1.10 W
Thermal Resistance (Rth)
(Junction to ground paddle) 34 °C/W
Serial Digital Interface Input Voltage 1.5 Vdc
Ref CLK Input (AC coupled)(each) 0.75 Vp-p
Baseband Inputs (BB, FM)(each) 0.75 Vp-p
Storage Temperature -55°C to 150°C
Operating Temperature -40°C to 85°C
ESD Sensitivity (HBM) Class 0, Pass at 200V
Outline Drawing
Table 6. Package Information
Part Number Package Body Material Lead Finish MSL Rating Package Marking
HMC6000LP711E RoHS-compliant Low Stress Injection
Molded Plastic Silica and Silicon 100% matte Sn MSL3 H6000
XXXX
[1] 4-Digit lot number XXXX
NOTES:
1. ALL DIMENSIONS ARE IN INCHES [MM]
2. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
3. PAD BURR LENGHT SHALL BE 0.15 mm MAX. PAD BURR HEIGHT SHALL BE 0.05 mm MAX.
4. PACKAGE WARP SHALL NOT EXCEED 0.05 mm
5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND
6. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED PCB LAND PATTERN..
Stresses above those listed under Absolute Maximum
Ratings may cause permanent damage to the device.
This is a stress rating only; functional operation of the
device at these or any other conditions above those
indicated in the operational section of this specication
is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device
reliability.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
9
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 7. Pin Descriptions
Pin Number Function Description
1FMM_I FSK negative in-phase input – DC coupled - 50
2F MP_ I FSK positive in-phase input – DC coupled - 50
3,8-10 NC These pins are not connected internally
4VDD_PLL 1.35V supply (VCO)
5REFCLKM Xtal REF CLK Minus - AC or DC coupled - 50
6REFCLKP Xtal REF CLK Plus - AC or DC coupled - 50
7VCC_REG 2.7V supply (VCO)
11 VCC_DIV 2.7V supply (Divider)
12 VCC_TRIP 2.7V supply (Tripler)
13 RESET Asynchronous reset-all registers (1.2V CMOS, active high)
14 ENABLE Serial digital interface enable (1.2V CMOS) - 50k
15 VDDD 1.35V supply (serial digital interface)
16 CLOCK Serial digital interface clock (1.2V CMOS) - 50k
17 DATA Serial digital interface data (1.2V CMOS) - 50k
18 SCANOUT Serial digital interface out (1.2V CMOS) - 50k
19 VCC_DRV1 2.7V supply (Driver)
20 VDD_PA 2.7V supply (PA)
21 VCC_PA1 4.0V supply (PA)
22-50 GND These pins and package bottom must be connected to RF/DC ground
externally.
51 VCC_PA2 4.0V supply (PA)
52 VCC_DRV2 2.7V supply (Driver)
53 VCC_MIX 2.7V (Mixer)
54 BB_QM Baseband negative quadrature input – DC coupled - 50
55 BB_QP Baseband positive quadrature input – DC coupled - 50
56 VCC_IF 2.7V supply (IF)
57 BB_IM Baseband negative in-phase input – DC coupled - 50
58 BB_IP Baseband positive in-phase input – DC coupled - 50
59 FMM_Q FSK negative quadrature input – DC coupled - 50
60 FMP_ Q FSK positive quadrature input – DC coupled - 50
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
10
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm
impedance while the package ground leads and exposed paddle should be connected directly to the ground plane
similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes.
The evaluation circuit board shown is part of an evaluation kit available from Hittite.
Evaluation PCB Daughtercard
Antenna-in-Package Location and Polarization
The antenna is located inside the package with geometric center and linear polarization angle as shown. The
geometric center can be used as the antenna pattern phase center provided there is sufficient unobstructed ground
plane extension around the chip. Measured antenna pattern phase centers will vary with frequecy and are dependent
on nite ground plane effects, and coupling to nearby components.
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
11
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Item Contents Part Number
Evaluation Kit
2 Daughtercard Evaluation PCBs with HMC6000LP711E and HMC6001LP711E
2 Motherboard Evaluation PCBs with crystals, USB Interface, supply regulators and
MCX connectorized IQ interface.
2 Wall mount power supplies.
2 USB A Male to USB B Female Cable
8 Phase matched MCX to SMA Cables
CD ROM (Contains User Manual, Evaluation PCB Schematic, Evaluation Software)
HMC6450
Evaluation Kit Order Information
Evaluation PCB Schematics
To view the Evaluation PCB Schematics please visit www.hittite.com and choose HMC6000LP711E from the “Search
by Part Number” pull down menu to view the product splash page.
Evaluation Kit
The HMC6450 evaluation kit contains everything that is needed to set up a bi-directional 60 GHz millimeter-wave
link using standard RF cable interfaces for baseband input and output. Kit comes with two motherboard PCBs
that provide on board crystals, USB interface, supply regulators, and SMA cables for connectorized IQ interfaces.
Supplied software allows the user to read from and write to all chip level registers using a Graphical User Interface
(GUI) or upload previously saved register settings.
Evaluation PCB Motherboard
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
12
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Theory of Operation
An integrated frequency synthesizer creates a low-phase noise LO between 16.3 and 18.3 GHz. The step size of the
synthesizer equates to 540MHz steps at RF when used with 308.5714 MHz reference crystal (compatible with the
IEEE channels of the ISM band) or 500 MHz steps if used with a 285.714 MHz reference crystal.
If the chip is congured for IQ baseband input, these signals are quatrature modulated onto an 8 to 9.1GHz sliding IF
using the synthesized LO divided by two. There are also options to input AM/FM/FSK/MSK waveforms directly to the
on-chip IF modulators. Contact Hittite application support for further guidance and application notes if interested in
these modes. The IF signal is then ltered and amplied with 17 dB of variable gain, then mixed with three times the
LO frequency to upconvert to an RF frequency between 57 and 64 GHz. Integrated notch lters attenuate the lower
mixing product at 40-46GHz. Two RF amplier stages provide gain to allow up to 11 dBm differential output from the
IC to an integrated low prole antenna.
The phase noise and quadrature balance of the HMC6000LP711E is sufficient to carry up to 16QAM modulation for
high data rate operation..
There are no special power sequencing requirements for the HMC6000LP711E; all voltages are to be applied
simultaneously.
Register Array Assignments and Serial Interface
The register arrays for both the transmitter and receiver are organized into 16 rows of 8 bits. Using the serial interface,
the arrays are written or read one row at a time as shown in Figure 22 and Figure 23, respectively. Figure 22 shows
the sequence of signals on the ENABLE, CLK, and DATA lines to write one 8-bit row of the register array. The ENABLE
line goes low, the rst of 18 data bits (bit 0) is placed on the DATA line, and 2 ns or more after the DATA line stabilizes,
the CLK line goes high to clock in data bit 0. The DATA line should remain stable for at least 2 ns after the rising edge
of CLK.
The Tx IC will support a serial interface running up to several hundred MHz, and the interface is 1.2V CMOS levels.
A write operation requires 18 data bits and 18 clock pulses, as shown in Figure 23. The 18 data bits contain the 8-bit
register array row data (LSB is clocked in rst), followed by the register array row address (ROW0 through ROW15,
000000 to 001111, LSB rst), the Read/Write bit (set to 1 to write), and nally the Tx chip address 110, LSB rst).
Note that the register array row address is 6 bits, but only four are used to designate 16 rows, the two MSBs are 0.
After the 18th clock pulse of the write operation, the ENABLE line returns high to load the register array on the IC; prior
to the rising edge of the ENABLE line, no data is written to the array. The CLK line should have stabilized in the low
state at least 2 ns prior to the rising edge of the ENABLE line.
Figure 22. Timing Diagram for writing a row of the Transmitter Serial Interface
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
13
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Figure 23. Timing Diagram for reading a row of the Transmitter Serial Interface
Table 8. Transmitter Register Array Assignments
Register Array Row & Bit Internal Signal Name Signal Function
ROW0
ROW0<7> pa_pwrdn Active high to power down most other PA circuits not controlled by ROW0<6>
ROW0<6> pa_pwrdn_fast Active high to power down the PA core in < 1 µs
ROW0<5> upmixer_pwrdn Active high to power down IF to RF upmixer
ROW0<4> divider_pwrdn Active high to power down local oscillator divider
ROW0<3> if_bgmux_pwrdn Active high to power down one of three on-chip bandgap refs (IF) and associated mux
ROW0<2> if_upmixer_pwrdn Active high to power down baseband to IF upmixer
ROW0<1> driver_pwrdn Active high to power down PA predriver
ROW0<0> ifvga_pwrdn Active high to power down IF variable gain amplier
ROW1
ROW1<7> ipc_pwrdn Active high to power down on chip current reference generator
ROW1<6> tripler_pwrdn Active high to power down frequency tripler
ROW1<5> ifvga_q_cntrl<2> These bits control the Q of the IF lter in the baseband to IF upmixer;
ROW1<5:3> = 000 for highest Q and highest gain.
To reduce Q and widen bandwidth, increment ROW1<5:3> in the sequence
001
100
101
111
ROW1<4> ifvga_q_cntrl<1>
ROW1<3> ifvga_q_cntrl<0>
ROW1<2> not used
ROW1<2:0> = xxx - not usedROW1<1> not used
ROW1<0> not used
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
14
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 8. Transmitter Register Array Assignments
Register Array Row & Bit Internal Signal Name Signal Function
ROW2
ROW2<7> F D B<11>
Factory Diagnostics;
ROW2<7:4> = 1111 for normal operation
ROW2<6> FDB<10>
ROW2<5> FDB<9>
ROW2<4> FDB<8>
ROW2<3> pa_sel_vgbs<3>
Controls the regulator for the base voltage of the PA output transistors;
ROW2<3:0> = 0000 for normal operation
ROW2<2> pa_sel_vgbs<2>
ROW2<1> pa_sel_vgbs<1>
ROW2<0> pa_sel_vgbs<0>
ROW3
ROW3<7> FDB<7>
Factory Diagnostics;
ROW4<7:4> = 0001 for normal operation
ROW3<6> FDB<6>
ROW3<5> FDB<5>
ROW3<4> FDB<4>
ROW3<3> FDB<3>
Factory Diagnostics;
ROW4<3:0> = 1111 for normal operation
ROW3<2> FDB<2>
ROW3<1> FDB<1>
ROW3<0> FDB<0>
ROW4
ROW4<7> pa_sel_vref<3>
Controls the bias current for the PA output transistors;
ROW4<7:4> = 0011 for normal operation
ROW4<6> pa_sel_vref<2>
ROW4<5> pa_sel_vref<1>
ROW4<4> pa_sel_vref<0>
ROW4<3> driver_bias<2> Controls the bias current for the PA predriver;
ROW4<3:1> = 111 for normal operationROW4<2> driver_bias<1>
ROW4<1> driver_bias<0>
ROW4<0> driver_bias2<2> Controls the bias current for the PA predriver2;
ROW4<0> = 1 for normal operation
ROW5
ROW5<7> not used
ROW5<7:4> = x - not used
ROW5<6> not used
ROW5<5> not used
ROW5<4> not used
ROW5<3> bg_monitor_sel These bits are for reserved for diagnostic purposes;
ROW5<3:2> = 01 for normal operation
ROW5<2> if_refsel
ROW5<1> enable_fm Active high to enable the FSK/MSK modulator inputs.
ROW5<1> = 0 for normal I/Q operation
ROW5<0> not used ROW5<0> = x - not used
ROW6
ROW6<7> ifvga_bias<3>
Controls the bias current of the IF variable gain amplier;
ROW6<7:4> = 1000 for normal operation
ROW6<6> ifvga_bias<2>
ROW6<5> ifvga_bias<1>
ROW6<4> ifvga_bias<0>
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
15
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 8. Transmitter Register Array Assignments
Register Array Row & Bit Internal Signal Name Signal Function
ROW6<3> ifvga_tune<3>
Controls the tuning of the IF lter for the variable gain amplier;
ROW6<3:0> = 1111 for normal operation
ROW6<2> ifvga_tune<2>
ROW6<1> ifvga_tune<1>
ROW6<0> ifvga_tune<0>
ROW7
ROW 7<7> ifvga_vga_adj<3> IF variable gain amplier gain control bits;
ROW 7<7:4> =
0000 is highest gain
1101 is lowest gain
Attenuation is ≈ 1.3 dB / step, ≈ 17 dB maximum
ROW 7<6> ifvga_vga_adj<2>
ROW 7<5> ifvga_vga_adj<1>
ROW 7<4> ifvga_vga_adj<0>
ROW7<3> if_upmixer_tune<3>
Controls the tuning of the IF lter for the IF to RF upmixer;
ROW7<3:0> = 1111 for normal operation
ROW 7<2> if_upmixer_tune<2>
ROW 7<1> if_upmixer_tune<1>
ROW7<0> if_upmixer_tune<0>
ROW8
ROW8<7> tripler_bias<13>
These bits control the biasing of the frequency tripler;
ROW8<7:0> = 10111111 for normal operation
ROW8<6> tripler_bias<12>
ROW8<5> tripler_bias<11>
ROW8<4> tripler_bias<10>
ROW8<3> tripler_bias<9>
ROW8<2> tripler_bias<8>
ROW8<1> tripler_bias<7>
ROW8<0> tripler_bias<6>
ROW9
ROW9<7> tripler_bias<5>
These bits control the biasing of the frequency tripler;
ROW9<7:2> = 011011 for normal operation
ROW9<6> tripler_bias<4>
ROW9<5> tripler_bias<3>
ROW9<4> tripler_bias<2>
ROW9<3> tripler_bias<1>
ROW9<2> tripler_bias<0>
ROW9<1> driver_bias2<1> Controls the bias current for the PA predriver2;
ROW9<1:0> = 11 for normal operation
ROW9<0> driver_bias2<0>
ROW10
ROW10<7> RDACIN<5>
VCO amplitude adjustment DAC;
ROW10<7:2> = 111100 for normal operation
ROW10<6> RDACIN<4>
ROW10<5> RDACIN<3>
ROW10<4> RDACIN<2>
ROW10<3> RDACIN<1>
ROW10<2> RDACIN<0>
ROW10<1> SYNRESET ROW10<1> = 0 for normal operation
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
16
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 8. Transmitter Register Array Assignments
Register Array Row & Bit Internal Signal Name Signal Function
ROW10<0> DIVRATIO<4>
ROW10<0>
Control the synthesizer divider ratio and output frequency. Refer to Tables 9 and 10
for synthesizer control details.
ROW11
ROW11<7> DIVRATIO<3>
ROW11<7:4>
Control the synthesizer divider ratio and output frequency. Refer to Tables 9 and 10
for synthesizer control details.
ROW11<6 > DIVRATIO<2>
ROW11<5> DIVRATIO<1>
ROW11<4> DIVRATIO<0>
ROW11<3> BAND<2> ROW11<3:1>
Control the VCO band, and must be changed when tuning the synthesizer output
frequency. Refer to Tables 9 and 10 for synthesizer control details.
ROW11<2 > BAND<1>
ROW11<1> BAND<0>
ROW11<0> REFSELDIV These bits are for reserved for diagnostic purposes;
ROW11<0> = 1 for normal operation
ROW12
ROW12<7> CPBIAS<2>
These bits control the synthesizer charge pump bias.
ROW12<7:5> = 010 for normal operation
ROW12<6> CPBIAS<1>
ROW12<5> CPBIAS<0>
ROW12<4> VRSEL<3>
These bits control the width of the lock window for the synthesizer lock detector.
ROW12<4:1> = 1111 species the widest lock window for normal operation
ROW12<3> VRSEL<2>
ROW12<2> VRSEL<1>
ROW12<1> VRSEL<0>
ROW12<0> REFSELVCO This bit is for reserved for diagnostic purposes;
ROW12<0> = 1 for normal operation
ROW13
ROW13<7> MUXREF These bit are reserved for diagnostic purposes;
ROW13<7> = 1 for normal operation
ROW13<6> DIV4 ROW13<6> = 0 for normal operation
ROW13<5> ENDC Active high to enable DC coupling on synthesizer reference input;
ROW13<5> = 0 for normal operation
ROW13<4> INI This bit is for reserved for diagnostic purposes;
ROW13<4> = 0 for normal operation
ROW13<3> PDDIV12 Active high to power down 1.2V circuits in synthesizer divider
ROW13<2> PDDIV27 Active high to power down 2.7V circuits in synthesizer divider
ROW13<1> PDQP Active high to power down synthesizer charge pump
ROW13<0> PDVCO Active high to power down synthesizer VCO
ROW14
ROW14<7> PDCAL Active high to power down VCO calibration comparators;
ROW14<7> = 0 for normal operation
ROW14<6> MUXOUT Controls multiplexing of diagnostic bits, high to read Row15<7:0>
ROW14<6> = 1 for normal operation
ROW14<5> PDALC12 Active high to power down VCO automatic level control (ALC);
ROW14<5> = 1 for normal operation
ROW14<4> PLOAD Active high to load external amplitude adjustment bits for VCO
ROW14<4> = 1 for normal operation
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
17
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 8. Transmitter Register Array Assignments
Register Array Row & Bit Internal Signal Name Signal Function
ROW14<3> WIDE<1> Control bits for VCO ALC loop;
ROW14<3:2> = 01 for normal operation
ROW14<2> WIDE<0>
ROW14<1> SLEW<1> Controls slew rate in sub-integer N divider
ROW14<1:0> = 10 for normal operation
ROW14<0> SLEW<0>
ROW15
ROW15<7> COMPP
Read only bits to indicate synthesizer lock:
ROW15<7:6> =
01 indicates that the VCO control voltage is within the lock window and the synthe-
sizer is locked.
11 indicates the VCO control voltage above lock window
00 below lock window
10 is a disallowed state indicating an error
ROW15<6> COMPN
ROW15<5> RDACMSB<2>
These bits are read only and reserved for factory diagnostic purposes.ROW15<4> RDACMSB<1>
ROW15<3> RDACMSB<0>
ROW15<2> RDACMUX<0>
These bits are read only and reserved for factory diagnostic purposes.ROW15<1> RDACMUX<1>
ROW15<0> RDACMUX<2>
Synthesizer Settings
Table 9. IEEE Channels Using 308.5714 MHz Reference
Frequency (GHz) Divider Setting Typical Band Setting
5 7. 24 10101 001
57.7 8 10100 001
58.32 (IEEE CH 1) 10011 010
58.86 10010 010
59.40 10001 011
59.94 10000 011
60.48 (IEEE CH 2) 11111 100
61.02 00000 100
61.56 00001 101
62.10 00010 101
62.64 (IEEE CH 3) 00011 110
63.18 00100 110
63.72 00101 111
Divide Ratio settings consist of registers ROW10 bit <0> (MSB) and ROW11 bits <4:7> (4 LSBs)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or txrx@hittite.com
MMWAVE TRANSMITTER - SMT
18
HMC6000LP711E
v0 0.1112
MILLIMETERWAVE TRANSMITTER
57 - 64 GHz
Table 10. 500 MHz Channels Using 285.7143 MHz Reference
Frequency (GHz) Divider Setting Typical Band Setting
57 00001 000
57.5 00010 000
58 00011 001
58.5 00100 001
59 00101 010
59.5 00110 010
60 00111 011
60.5 01000 011
61 01001 100
61.5 01010 100
62 01011 101
62.5 0110 0 101
63 01101 110
63.5 01110 110
64 01111 111
Divide Ratio settings consist of registers ROW10 bit <0> (MSB) and ROW11 bits <4:7> (4 LSBs)
OBSOLETE
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D