DSS 16-01A DSS 16-01AS IFAV = 16 A VRRM = 100 V VF = 0.64 V Power Schottky Rectifier VRSM VRRM V V 100 100 Type A DSS 16-01A C TO-263 AB (AS-Type) TO-220 AC (A-Type) DSS 16-01AS C (TAB) C A C A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV TC = 155C; rectangular, d = 0.5 IFSM TVJ = 45C; tp = 10 ms (50 Hz), sinev EAS IAS = 9.5 A; L = 180 H; TVJ = 25C; non repetitive IAR VA =1.5 * VRRM typ.; f=10 kHz; repetitive (dv/dt)cr Ptot TC = 25C Md mounting torque (A-Type only) Weight typical Symbol Conditions VF A A 230 A 10 mJ 1 A 5000 TVJ TVJM Tstg IR 35 16 -55...+175 175 -55...+150 C C C 105 W 0.4...0.6 2 Nm g Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Characteristic Values typ. max. TVJ = 25C VR = VRRM TVJ = 125C VR = VRRM IF = 15 A; IF = 15 A; IF = 30 A; V/ms Features * International standard package * Very low VF * Extremely low switching losses * Low IRM-values * Epoxy meets UL 94V-0 TVJ = 125C TVJ = 25C TVJ = 125 C RthJC RthCH 0.5 0.5 5 mA mA 0.64 0.79 0.76 V V V 1.4 K/W K/W Dimensions see outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2000 IXYS All rights reserved 007 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified 1-2 DSS 16-01A DSS 16-01AS 100 1000 10 TVJ=175C mA A IR IF pF 1 150C CT 125C 0.1 100C 10 100 TVJ = 175C 150C 125C 25C 1 0.0 75C 0.01 50C 25C 0.001 0.2 0.4 0.8 V 1.0 0.6 0 20 40 60 Fig. 2 Typ. value of reverse current IR versus reverse voltage VR 40 A 35 60 80 V 100 VR Fig. 3 Typ. junction capacitance CT versus reverse voltage VR W P(AV) d=0.5 A IFSM DC 20 20 d= DC 0.5 0.33 0.25 0.17 0.08 15 15 10 10 5 5 0 1000 0 0 40 80 120 TC 160C Fig. 4 Average forward current IF(AV) versus case temperature TC ZthJC 40 25 25 K/W 20 10000 30 30 IF(AV) 1 0 80 V 100 VR VF Fig. 1 Maximum forward voltage drop characteristics TVJ= 25C 10 0.0001 0 5 10 15 20 25 IF(AV) 30 A 100 10 100 1000 s 10000 tP Fig. 5 Forward power loss characteristics D=0.5 0.33 0.25 0.17 0.08 0.1 Single Pulse (Thermal Resistance) DSS 16-01A 0.01 0.0001 0.001 0.01 0.1 1 s 10 t Note: All curves are per diode 007 Fig. 6 Transient thermal impedance junction to case at various duty cycles (c) 2000 IXYS All rights reserved 2-2