SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 1 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
1.6x1.6mm FULL-COLOR SURFACE MOUNT
LED
PRELIMINARY SPEC
ATTENTION
OBSERVE PRECAUTIONS
FOR HANDLING
ELECTROSTATIC
DISCHARGE
SENSITIVE
DEVICES
Part Number: APTF1616SEEVGAPBAC
Hyper Red
Green
Blue
Features
z1.6mmX1.6mm SMT LED, 0.7mm thickness.
zLow power consumption.
zOne red, one green and one blue chips in one package.
zCan produce any color in visible spectrum, including
white light.
zPackage : 2000pcs / reel.
zMoisture sensitivity level : level 3.
zRoHS compliant.
Description
The Hyper Red source color devices are made with Al-
GaInP on GaAs substrate Light Emitting Diode.
The Green source color devices are made with InGaN on G-
SiC Light Emitting Diode.
The Blue source color devices are made with InGaN
on SiC Light Emitting Diode.
Static electricity and surge damage the LEDS.
It is recommended to use a wrist band or anti-electrostatic
glove when handling the LEDs.
All devices, equipment and machinery must be electrically
grounded.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.2(0.008") unless otherwise noted.
3. Specifications are subjected to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 2 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Min. Typ. 2θ1/2
APTF1616SEEVGAPBAC
Hyper Red (AlGaInP)
WATER CLEAR
180 400
Green (InGaN) 70 180
Blue (InGaN) 10 40
120°
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength
Hyper Red
Green
Blue
630
520
468
nm IF=20mA
λD [1] Dominant Wavelength
Hyper Red
Green
Blue
621
525
470
nm IF=20mA
Δλ1/2 Spectral Line Half-width
Hyper Red
Green
Blue
20
35
21
nm IF=20mA
C Capacitance
Hyper Red
Green
Blue
25
100
100
pF VF=0V;f=1MHz
VF [2] Forward Voltage
Hyper Red
Green
Blue
2
3.2
3.2
2.5
4
4
V IF=20mA
IR Reverse Current
Hyper Red
Green
Blue
10
10
10
uA VR=5V
Parameter Hyper Red Green Blue Units
Power dissipation 75 120 120 mW
DC Forward Current 30 30 30 mA
Peak Forward Current [1] 195 100 100 mA
Reverse Voltage 5 V
Operating Temperature -40°C To +85°C
Storage Temperature -40°C To +85°C
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 3 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
APTF1616SEEVGAPBAC
Hyper Red
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 4 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
Green
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 5 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
Blue
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 6 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
APTF1616SEEVGAPBAC
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Dimensions
(Units : mm)
SPEC NO: DSAH8850 REV NO: V.2 DATE: MAR/25/2009 PAGE: 7 OF 7
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1203007428
PACKING & LABEL SPECIFICATIONS APTF1616SEEVGAPBAC
