YAGEO CORPORATION ELECTROLYTIC CAPACITORS
ELECTRICAL CHARACTERISTICS
Operating Temperature Range : -40 ~ +85°C / -25 ~ +85°C
Rated Voltage Range : 6.3 ~ 100V / 160 ~ 450V
Rated Capacitance Range : 0.1 ~ 22000µF / 0.47 ~ 470µF
Capacitance Tolerance : -20 ~ +20% at 120Hz, 20°C
DC Leakage Current (µA) : I = 0.01CV (µA) or 3µA / I = 0.03CV (µA) + 10µA whichever is greater.
(After Rated Voltage Applied for 2 Minutes )
Dissipation Factor
W V (V) : 6.3 10 16 25 35 50 63 100 160 ~ 250 350 ~ 450
D.F (%) : 24 20 16 14 12 10 10 10 20 24
For capacitors whose capacitance exceeds 1000µF. The value of DF(%) is increased by 2% for every
addition of 1000µF.
Endurance : After the rated voltage has been applied at 85°C for 2000 hours, the capacitors shall
meet following requirements.
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : 200% or Less of Initial Specified Value
(c) Leakage Current : Initial Specied Value or Less
Shelf Life : After have been placed at 85°C without voltage applied for 1000 hours the capacitors shall
meet following requirements.
(a) Capacitance Change : Within 20% of Initial Value
(b) Dissipation Factor : 200% or Less of Initial Specified Value
(c) Leakage Current : Initial Specied Value or Less
SK [ For General ]
85°C Single-Ended Lead Aluminum Electrolytic Capacitors
DESCRIPTION
Lower-cost capacitors suitable for high density printed
circuit boards.
Very high volumetric efciency
Ideally suited for general purpose applications,
decoupling bypass, and ltering circuit in entertainment
electronics.
Featuring high CV products with moderate cost
MULTIPLIER FOR RIPPLE CURRENT
Frequency Coefcient
FREQUENCY (Hz) 120 300 1K
10K~100K
6.3~100V Below~68µF 1.00 1.20 1.30 1.50
6.3~100V 100~680µF 1.00 1.10 1.15 1.20
6.3~110V 1000~22000µF 1.00 1.05 1.10 1.15
160~450V Below~220µF 1.00 1.25 1.40 1.40
160~450V 220µF Above 1.00 1.10 1.13 1.13
Temperature Coefcient
TEMPERATURE (°C) 50 70 85
FACTOR 1.30 1.15 1.00
Miniature Aluminum
Electrolytic Capacitors
L 15Min.
0.4Max.
D
±
0.5
F
±
0.5
Rubber End Seal
5Min.
Vinyl Sleeve
(P.V.C)
Rubber Stand-off
L ≤ 16 L + 1.5Max.
L > 16 L + 2Max.
Dø = 8 & 10 L + 2.5Max.
Dø < 20 Dø + 0.5
Dø ≥ 20 Dø + 1
Rubber End Seal
L 15Min. D
±
0.5
F
±
0.5
5Min.
Vinyl Sleeve
(P.V.C)
Dø F dø
4.0 1.5 0.45
5.0 2.0 0.5
6.3 2.5
8.0 3.5 0.6
10.0 5.0
12.0
13.0
16.0 7.5 0.8
18.0
22.0 10.0
DIAGRAM OF DIMENSIONS Dimensions: mm