Rework small boards directly on the PCT-100
This new pre-heater targets heat for improved speed
and efciency for high thermal demand applications, in-
cluding lead-free. Used for SMT and through-hole hand
processes, the PCT-100 uses convection air heating to
heat a PCB rst, for better soldering, improved process
control and increased productivity.
The PCT-100 Pre-heater Convection Tool adds heat
volume, without turning up the temperature, to perform
assembly tasks at the appropriate peak temperature
without distorting the board.
Ideal for thick boards and smaller boards, such as cell
phone and PDAs, the pre-heater focuses and delivers
hot air where you need it. When nished, the fan contin-
ues without heat to cool down the board.
The system is easy-to-use. Simply plug it in, turn it on,
adjust the heat and it’s ready for work.
Accessories add to ease-of-use
The PCT-100 can be used with or without a board
holder. An Arm Rest is also available to steady your
hand and keep your arm from being fatigued. The board
holder and arm rest are available as a complete kit, with
the PCT-100, or they can be purchased separately.
Availability
The PCT-100 will be available July 1, 2007. Please
contact your local OK International Representative for
more information.
Focused heat for high thermal demand applications
PCT-100 Focused
Convection Pre-heater
Pre-heater and Accessories
PCT-100-21 Pre-heater Convection Tool 220 VAC
PCT-AR Arm Rest
BH-100 Board Holder
BH-010 Integrated Board Holder
System Packages
PCT-101-21 Focused Convection Pre-heater with Arm Rest
PCT-102-21 Focused Convection Pre-heater with Arm Rest and Board Holder
PCT-103-21 Focused Convection Pre-heater with Arm Rest and integrated Board Holder
Spare Parts
PCT-1HE-21 Heater Assembly 230 VAC
PCT-ARPAD Arm Rest Pad
PCT-100 Focused Convection Pre-heater
PCT-100 Pre-heater Specications
Input Voltage
PCT-100-21 230 VAC
Heater Rating 450 W
Pollution Degree Category II
Storage Temperature -10°C—60°C (14°F—140°F)
Environmental Temperature 0°C—40°C (32°F—104°F)
Air Flow 10.2 cfm
Control Temperature Variable Up to 300°C (572°F)
Surface Resistivity ESD 106Ω - 1011Ω
Dimensions 205mm (L) x 155mm (W) x 65mm (H)
8.07" (L) x 6.10" (W) x 2.56" (H)
Weight 1.6 kg
Certicate/Approvals cTUVus, CE
Key Features & Benets
• Accelerates and enhances the lead-free SMT & through-hole rework process
• Temperature ramps up quickly, maximizing productivity
• Adjustable knob controls the required temperature to below 300°C
• Controlled cool-down eliminates thermal shock to PCB And components
• Thermocouple feedback temperature control regulates output temperature
• System safety feature automatically shuts off heating when fan is stopped
• ESD safe
BH-100 Board Holder Specications
Maximum PCB size: 12.0" (304.8mm) wide
Minimum PCB size: 2.5" (63.5mm) wide
BH-100 Board Holder
Use OKi or Metcal soldering tools with
the PCT-100. The OKi HCT-900 Hand
Held Convection Tool is also ideal for
use with the pre-heater.
PCT-AR Arm Rest
PCT-100 with
Integrated
Board Holder
PCT-100-21
