1NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
NSPE-S Series
Hybrid Aluminum Electrolytic Capacitors
Rated Voltage Range 6.3 ~ 16Vdc
Rated Capacitance Range 10 ~ 1000µF
Operating Temp. Range -55 ~ +105°C
Capacitance Tolerance ±20% (M)
Max. Leakage Current
After 2 Minutes @ 20°C See Specications Tables
Working and Surge Voltage Ratings W.V. (Vdc) 6.3 10 16
S.V. (Vdc) 8.2 13 20
Tan δ @ 120Hz/20°C 0.18 0.16 0.14
Impedance Ratio Z -55°C/Z +20°C 1 ~ 2.5
Z +105°C/Z +20°C 0.6 ~ 1.0
Load Life Test @ 105°C
6.3mm Dia. = 3,000 Hours
8mm ~ 10mm Dia. parts = 5,000 Hours
Capacitance Change Within ±30% of initial measured value
Tan δ and ESR Less than 200% of specied max. value
Leakage Current Less than specied max. value
CHARACTERISTICS
• CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING
• EXTENDED LOAD LIFE (3,000 ~ 5,000 HOURS)
• AVAILABLE WITH WIDE TERMINATION & ANTI-VIBRATION SKIRT
• ULTRA LOW ESR, HIGH RIPPLE CURRENT
• CAPACITANCE VALUES UP TO 1000μF
• 6.3x6.3mm ~ 10x10.8mm CASE SIZES
• REFLOW SOLDERING RATED TO +260°C (see reow specications)
• MEETS THE REQUIREMENTS OF AEC-Q200*
*Contact NIC for supporting test data
RoHS
Compliant
includes all homogeneous materials
*See Part Number System for Details
PART NUMBER Cap.
(µF)
Working
Voltage
Case Size
(D X L) mm
Max. Leakage
Current (µA)
After 2 minutes*
Max. ESR (mΩ)
AT 100kHz/20°C
Max. Ripple Current (mA rms)
AT 100kHz/105°C
NSPE-S101M6.3V6.3X6.3TR13F 100
6.3
6.3X6.3 126 36 1630
NSPE-S151M6.3V6.3X6.3TR13F 150 6.3X6.3 189 36 1630
NSPE-S221M6.3V6.3X8TR13F 220 6.3X8 278 32 2020
NSPE-S221M6.3V8X10.8TR13F 8X10.8 278 16 3150
NSPE-S331M6.3V8X10.8TR13F 330 8X10.8 416 16 3150
NSPE-S391M6.3V8X10.8TR13F 390 8X10.8 492 16 3150
NSPE-S471M6.3V8X10.8TR13F 470 8X10.8 593 16 3150
NSPE-S561M6.3V8X10.8TR13F 560 8X10.8 706 16 3150
NSPE-S681M6.3V10X10.8TR13F 680 10X10.8 857 15 3890
NSPE-S821M6.3V10X10.8TR13F 820 10X10.8 1034 15 3890
NSPE-S102M6.3V10X10.8TR13F 1000 10X10.8 1260 15 3890
STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm)
For Automotive Applications See Part Numbering System *Please review typical leakage current performance, as
shown on NIC load life endurance test report.
NSPE-S 471 M 6.3V 8x10.8 TR 13 P WT Y F
RoHS Compliant
97% Sn (min.), 3% Bi (max.)
WT = Wide Terminations
Optional plastic reel (standard material is cardboard). See page 4 & 5
330mm (13”) Reel
Tape & Reel
Size in mm
Working Voltage
Tolerance Code M=20%
Capacitance Code in µF, rst 2 digits are signicant
Third digit is no. of zeros, “R” indicates decimal for
values under 10µF
Series
PART NUMBER SYSTEM
Optional: Suitable for automotive equipment, sourced to special
production and inspection at TS-16949 certied production site
2NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
Part Marking
Capacitance Value
Voltage
Lot Code
Series Code
100
6V
S17
NSPE-S Series
Hybrid Aluminum Electrolytic Capacitors
Cap. µF 100Hz 1KHz 10KHz 100KHz
C < 10 0.03 0.20 0.50 1.00
> 10 0.05 0.20 0.50 1.00
RIPPLE CURRENT FREQUENCY
CORRECTION FACTORS
PART NUMBER Cap.
(µF)
Working
Voltage
Case Size
(D X L) mm
Max. Leakage
Current (µA)
After 2 minutes*
Max. ESR (mΩ)
AT 100kHz/20°C
Max. Ripple Current (mA rms)
AT 100kHz/105°C
NSPE-S330M10V6.3X6.3TR13F 33
10
6.3X6.3 100 40 1510
NSPE-S470M10V6.3X6.3TR13F 47 6.3X6.3 100 40 1510
NSPE-S680M10V6.3X6.3TR13F 68 6.3X6.3 136 40 1510
NSPE-S101M10V6.3X8TR13F 100 6.3X8 200 35 1910
NSPE-S101M10V8X10.8TR13F 8x10.8 200 18 2800
NSPE-S151M10V6.3X8TR13F 150 6.3x8 300 35 1910
NSPE-S151M10V8X10.8TR13F 8X10.8 300 18 2800
NSPE-S221M10V8X10.8TR13F 220 8X10.8 440 18 2800
NSPE-S331M10V8X10.8TR13F 330 8X10.8 660 18 2800
NSPE-S471M10V10X10.8TR13F 470 10X10.8 940 16 3650
NSPE-S561M10V10X10.8TR13F 560 10X10.8 1120 16 3650
NSPE-S100M16V6.3X6.3TR13F 10
16
6.3X6.3 100 54 1130
NSPE-S220M16V6.3X6.3TR13F 22 6.3X6.3 100 54 1130
NSPE-S330M16V6.3X6.3TR13F 33 6.3X6.3 106 54 1130
NSPE-S470M16V6.3X8TR13F 47 6.3X8 151 45 1480
NSPE-S470M16V8X10.8TR13F 47 8X10.8 151 22 2290
NSPE-S680M16V8X10.8TR13F 68 8X10.8 218 22 2290
NSPE-S101M16V8X10.8TR13F 100 8X10.8 320 22 2290
NSPE-S151M16V10X10.8TR13F 150 10X10.8 480 20 2920
STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm)
For Automotive Applications See Part Numbering System *Please review typical leakage current performance, as
shown on NIC load life endurance test report.
PRECAUTIONS
Please review the notes on correct use, safety and precautions found at
www.niccomp.com/precautions
If in doubt or uncertainty, please review your specic application - process
details with NIC’s technical support personnel: tpmg@niccomp.com
3NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
LAND PATTERN DIM. (mm)
+-
A AP
B
Case Dia. A B P
6.3 3.5 1.8 2.1
8 4.1 2.1 2.8
10 4.4 2.5 4.3
NSPE-S Series
Hybrid Aluminum Electrolytic Capacitors
C
W
P
A
RR
T
B
Case Size Dφ ±0.5 L ± 0.5 A, B C ±0.2 P ±0.2 W R T
8 x 10.8WT 8.0 10.5 8.3 ± 0.2 9.0 3.2 0.7 ~ 1.0 (0.7) (1.3)
10 x 10.8WT 10.0 10.5 10.3 ± 0.2 11.0 4.6 1.0 ~ 1.4 (0.7) (1.3)
WIDE TERMINATION DIM. (mm)
Case Size abc
8x10.8 2.5 4.5 4.7
10x10.8 3.8 4.8 4.7
WIDE TERMINATION
LAND PATTERN DIM. (mm)
a
c
b
Termination deection:
WT = 0.15mm max. from
bottom of support terminals
Dφ
L
WT
Anti-Vibration
Skirt
DIMENSIONS (mm)
0.3mm max.
Dφ
L
Case Size Dφ ±0.5 L max. A, B ±0.2 W I ±0.2 P ±0.2
6.3x6.3 6.3 6.3 6.6 0.5 ~ 0.8 2.5 2.2
6.3x8 6.3 8.0 6.6 0.5 ~ 0.8 2.5 2.2
8x10.8 8.0 10.8 8.3 0.7 ~ 1.0 2.9 3.2
10x10.8 10 10.8 10.3 1.0 ~ 1.4 3.2 4.6
+ -
II
W
P
A
B
WT (Wide Terminations) Anti-Vibration Test
Test Method
Direction: X, Y, Z axis
Frequency & Duration: 5 to 2000Hz reciprocation for 20 minutes, 2 hours each direction
Peak to Peak Amplitude: 5mm
Peak Acceleration: 30G
Sweep Type: Log
D Capacitance Within ± 10% of initial value
Tangent of Loss < Specied value
Leakage Current < Specied value
4NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
T
APFeeding
+
-
1.5∅ +0.1/- 1.75 ±
D
B
C
1.5φ+0.1/-0 1.75 + 0.15
t
4 + 0.1
Case Size A
±0.5
B
±0.5
C
±0.3
D
±0.1
P
±0.1
T
±0.2
t
max.
6.3x6.3 7.0 7.0 16.0 7.5 12.0 6.5 0.4
6.3x8 7.0 7.0 16.0 7.5 12.0 8.2 0.4
8x10.8 8.7 8.7 24.0 11.5 16.0 11.1 0.4
10x10.8 10.7 10.7 24.0 11.5 16.0 11.2 0.4
Case Size W
±1.0
Qty per Reel
13" (330mm) 15" (380mm)
6.3x6.3 18 800 1,000
6.3x8 18 500 900
8x10.8 26 300 500
10x10.8 26 300 500
TAPING SPECIFICATIONS (mm)
1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets.
2. Leader tape: Approximately 20cm of cover tape at leader.
3. Connection: Maximum 3 connections (slices) per reel.
2mm ± 0.5mm
φ13mm ± 0.5mm
φ21mm ± 0.8mm
φ330mm ± 2.0mm
or φ380mm ± 2.0mm
φ50mm min.
W
3mm
NSPE-S Series
Hybrid Aluminum Electrolytic Capacitors
Diameter Preheat
(120 sec. max.)
Time above
200°C
Time above
217°C
Time above
230°C
Peak
Temperature
Number
of Reow Passes
6.3 ~ 10mm 150°C ~ 190°C 100 sec. max. 80 sec. max. 40 sec. max. 250°C/5 sec. 2x*
150°C ~ 180°C 60 sec. max. 50 sec. max. 40 sec. max. 260°C/instantaneous 1x
PEAK TEMPERATURES AND DURATIONS
*Two reow passes are permissible with a cool down to room temperature required between
the rst and second pass.
RECOMMENDED REFLOW SOLDERING PROFILE
Time Above 200°C
(see table below)
50
100
150
200
Time (Seconds)
Temperature - Deg. C
Preheat - 120 seconds max.
(see table for temperature)
Peak Temperature
(see table below)
260
230 Time Above 230°C
(40 seconds max.)
217
B 330mm (13") CARDBOARD REEL
LB 380mm (15") CARDBOARD REEL
(See page 5 for plastic reel dimensions)
5NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com www.RFpassives.com www.SMTmagnetics.com
SPECIFICATIONS ARE SUBJECT TO CHANGE
NSPE-S Series
Hybrid Aluminum Electrolytic Capacitors
AB
W1
W2
E
D
C
Optional V-Chip 15" (380mm) Plastic Reels (LBP sufx)
Case Size Tape Width A B C D E
6.3x6.3, 6.3x8 16.0 φ380
±2 φ80~105 φ13
±0.5
φ21
±1.0
2.0
±0.5
8x10.5, 10x10.5 24.0
Color
Black or Blue
Dimensions (mm)
Case Size Tape Width W1 W2
6.3x6.3, 6.3x8 16.0 16.5 ~ 18.0 19.5 ~ 24.0
8x10.5, 10x10.5 24.0 24.5 ~ 26.0 27.5 ~ 32.0
Case Size Tape Width A B C D E
6.3x6.3, 6.3x8 16.0 φ330
±2.0 φ50~105 φ13
±0.5
φ21
±1.0
2.0
±0.5
8x10.5, 10x10.5 24.0
Color
Black or Blue
Dimensions (mm)
Case Size Tape Width W1 W2
6.3x6.3, 6.3x8 16.0 16.4 ~ 18.4 19.5 ~ 24.0
8x10.5, 10x10.5 24.0 24.4 ~ 26.4 27.5 ~ 32.0
Optional V-Chip 13" (330mm) Plastic Reels (BP sufx)
AB
W1
W2
E
D
C
Case Size W
±1.0
Qty per Reel
13" (330mm) 15" (380mm)
6.3x6.3 18 800 1,000
6.3x8 18 500 900
8x10.8 26 300 500
10x10.8 26 300 500