Preliminary Product Brief * For Discussion with Tyco Electronics Customers Only - Tyco Electronics Proprietary Phone: 800-253-0490 Fax: 408-732-2002 www.xp-foresight.com QRW 40A single output series Industry standard Quarter brick DC/DC converter, 36Vdc-75Vdc (48V) input voltage range, Output voltages available from 12V-1.0V I II III IV (approval pending) The QRW-series dc-dc converters are a new generation of DC/DC power modules designed for optimum efficiency and power density. The QRW provides up to 40A output current in an industry standard quarter brick, which makes it an ideal choice for small space, high current and low voltage applications. The converter uses synchronous rectification technology and innovative packaging techniques to achieve ultra high efficiency reaching 91% at 3.3V full load. Thanks to the ultra high efficiency of this converter, the power dissipation is such that for most applications a heat sink is not required. In addition, the QRW-series supports future migration of semiconductor and microprocessor supply voltages down to 1.0V. * Delivers up to 40A output current * Ultra High Efficiency: 91% @ 3.3V full load * Improved Thermal Performance: -1 25A at 70C at 1ms (200LFM) * High power density: 100W/in * Low output voltages down to 1V: supports migration to future IC and microprocessor supply voltages * Active load sharing option: Paralleling * Cost efficient open frame design * Optional heat-sink: to permit operation over extended ambient temperature ranges Specification * * * * * * * * * * * Tightly regulated output, typical 1% Monotonic start-up into pre-biased output Output voltage adjustment trim +10% / -20% Load regulation 0.2% Line regulation 0.2% No minimum load required Ripple and noise (5Hz to 20MHz bandwidth) - RMS 40mVrms (3.3V) - Peak to peak 150mVpk-pk (3.3V) Operating temperature range: -40C to 110C Designed to meet basic insulation 1500Vdc isolation voltage Remote output voltage sensing Protection * * * Applications * * * * I) II) III) IV) Wireless Networks Access and Optical Network Equipment Enterprise Networks Latest generation ICs (DSP, FPGA, ASIC) and Microprocessor powered applications Output overcurrent and overvoltage protection Over-temperature protection Input under voltage protection Options * * * * * Positive remote on/off logic Active load sharing (Paralleling) Case ground pin Auto restart after fault shutdown Heatsink This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use equipment should be fol lowed. CSA is a registered trademark of Canadian Standards Association. UL is a registered trademark of Underwriters Laboratories, Inc. VDE is a trademark of Verband Deutcher Elektrotechniker e.V. QRW 40A single output series High Efficiency Industry Standard Quarter Brick Outline Drawing and Pin-out June 01 Page Number Physical Dimensions and design Industry standard, Quarter brick size with external dimensions of 57.9mm x 36.8mm x 9.5mm (2.28" x 1.45" x 0.375") Weight 38.0g (1.34oz) The QRW series has a robust open frame construction able to withstand industry standard, through-hole handling, soldering and cleaning processes. Ordering Information Please contact your Tyco Electronics sales representative for pricing, availability and optional features. Product codes Input Voltage QRW010A0B1 QRW025A0A1 QRW035A0F1 QRW035A0G1 QRW040A0D1 QRW040A0Y1 QRW040A0M1 QRW040A0P1 QRW040A0S1R01 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) 48V (36-75Vdc) Output Voltage(s) 12V 5V 3.3V 2.5V 2.0V 1.8V 1.5V 1.2V 1.0V Output Current Efficiency Connector Type Comcodes 10A 25A 35A 35A 40A 40A 40A 40A 40A 92% 92% 91% 90% T.B.D 87% 85% 84% 83% Through hole Through hole Through hole Through hole Through hole Through hole Through hole Through hole Through hole T.B.D T.B.D T.B.D T.B.D T.B.D T.B.D T.B.D T.B.D T.B.D -1 Standard negative remote on/off logic Phone: 800-253-0490 Fax: 408-732-2002 www.xp-foresight.com * This preliminary product brief is only for discussion with customers to determine customer interest and requirements. Tyco Electronics makes no commitment to sample or manufacture for sale this product. Tyco Electronics reserves the right to make changes to the product(s) or information contained herein without notice and makes no representation with respect to the accuracy of the information herein. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. (c) 2001 Tyco Electronics Power Systems, Inc., (Mesquite, Texas) All International Rights Reserved.