QSB363C Subminiature Plastic Silicon Infrared Phototransistor Features Description NPN Silicon Phototransistor The QSB363 is a silicon phototransistor encapsulated in a clear infrared T-3/4 package. T-3/4 (2mm) Surface Mount Package Medium Wide Beam Angle, 24 Clear Plastic Package Matched Emitters: QEB363 or QEB373 Tape & Reel Option (See Tape & Reel Specifications) Lead Form Options: Gullwing, Yoke, Z-Bend Package Dimensions EMITTER 0.276 (7.0) MIN 0.087 (2.2) 0.071 (1.8) 0.024 (0.6) 0.016 (0.4) 0.019 (0.5) 0.012 (0.3) 0.074 (1.9) .118 (3.0) .102 (2.6) .059 (1.5) .051 (1.3) Schematic 0.055 (1.4) 0.008 (0.21) 0.004 (0.11) 0.106 (2.7) 0.091 (2.3) 0.024 (0.6) NOTES: 1. Dimensions are in inches (mm). 2. Tolerance of .010 (.25) on all non nominal dimensions unless otherwise specified. (c)2011 Fairchild Semiconductor Corporation QSB363C Rev. 1.0.3 COLLECTOR EMITTER www.fairchildsemi.com QSB363C -- Subminiature Plastic Silicon Infrared Phototransistor March 2011 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. ) Symbol Parameter Rating Unit C TOPR Operating Temperature -25 to +85 TSTG Storage Temperature -40 to +85 C TSOL Soldering Temperature (Iron)(2,3,4) 260 C TSOL Soldering Temperature (Flow)(2,3) 260 C VCEO Collector Emitter Voltage 30 V VECO Emitter Collector Voltage 5 V Power Dissipation(1) 75 mW PC Notes 1. Derate power dissipation linearly 1.33mW/C above 25C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Pulse conditions: tp = 100s, T = 10ms. 5. D = 940nm, GaAs. Electrical/Optical Characteristics (TA = 25C) Symbol Parameters P Peak Sensitivity Wavelength Reception Angle ICEO BVCEO BVECO IC(on) VCE (SAT) Test Conditions Min. Typ. Max. 940 Units nm 12 0mW/cm2 Collector Dark Current VCE = 20V, Ee = Collector-Emitter Breakdown Voltage IC = 100A, Ee = 0mW/cm2 30 V Emitter-Collector Breakdown Voltage 0mW/cm2 5 V On-State Collector Current IE = 100A, Ee = VCE = 5V, Ee = 0.5mW/cm2 1mW/cm2 Collector-Emitter Saturation Voltage IC = 2mA, Ee = tr Rise Time tf Fall Time VCE = 5 V, IC = 1mA, RL = 1000 (c)2011 Fairchild Semiconductor Corporation QSB363C Rev. 1.0.3 100 1.0 1.5 nA mA 0.4 V 15 s 15 s www.fairchildsemi.com 2 QSB363C -- Subminiature Plastic Silicon Infrared Phototransistor Absolute Maximum Ratings (TA = 25C unless otherwise specified) Fig. 1 Collector Power Dissipation vs. Ambient Temperature Fig. 2 Spectral Sensitivity 1.0 100 Relative Spectral Sensitivity Collector Power Dissipation Pd (mW) TA = 25C 80 60 40 20 0.8 0.6 0.4 0.2 0 0 -25 0 25 50 100 75 85 100 300 500 10 VCE = 5 V Ee = 1 mW/cm2 Collector Current IC (mA) Relative Collector Current (%) 160 120 100 80 60 40 1100 1300 VCE = 5 V TA = 25C 1 0.1 0.01 20 0 0 20 10 40 30 50 60 0.001 0.01 70 1 0.1 10 Ambient Temperature TA (C) Irradiance Ee (mW/cm2) Fig. 5 Collector Dark Current vs. Ambient Temperature Fig. 6 Collector Current vs. Collector Emitter Voltage 10-6 5 14 VCE = 20 V 12 2 Collector Current IC (mA) Collector Dark Current ICEO (A) 900 Fig. 4 Collector Current vs. Irradiance Fig. 3 Relative Collector Current vs. Ambient Temperature 140 700 Wavelength (nm) Ambient Temperature TA (C) 10-7 5 2 10-8 5 2 10-9 5 10 Ee=1.50mW/cm2 8 Ee=1.25mW/cm2 6 Ee=1.0mW/cm2 4 Ee=0.75mW/cm2 2 2 10-10 Ee=0.5mW/cm2 0 0 25 50 75 100 0 2 4 3 Collector Emitter Voltage VCE (V) Ambient Temperature (C) (c)2011 Fairchild Semiconductor Corporation QSB363C Rev. 1.0.3 1 www.fairchildsemi.com 3 QSB363C -- Subminiature Plastic Silicon Infrared Phototransistor Typical Performance Curves Features Three lead forming options: Gull Wing, Yoke and Z-Bend Compatible with automatic placement equipment Supplied on tape and reel or in bulk packaging Compatible with vapor phase reflow solder processes 0.0060.002 (0.150.05) 0.0250.004 (0.650.1) 0.0430.008 0.0550.008 (1.10.2) (1.40.2) R0.031.004 (0.80.1) 0.0120.004 (0.30.1) 0.032 +0.005 -0 +0.13 (0.83 -0 0.0290.004 (0.750.1) Emitter CL 0.0160.004 (0.40.1) 0.0200.004 (0.50.1) 0.0430.008 0.0550.008 R0.031.004 (1.10.2) (1.40.2) (0.80.1) 0.0510.004 (1.30.1) 0.0060.002 (0.150.05) 0.1570.008 (4.00.2) CL 0.0790.008 (2.00.2) 0.0160.004 (0.40.1) 0.0200.004 (0.50.1) CL Emitter 0.0980.004 (2.50.1) 0.0550.004 (1.40.1) 0.023 +0.005 -0 (0.6 +0.13 ) -0 ) 0.120.008 (3.050.2) 0.1690.008 (4.30.2) 0.2280.008 (5.80.2) 0.0250.004 (0.650.1) CL o0.0750.008 (1.90.2) 0.0790.008 (2.00.2) 0.0980.004 (2.50.1) 0.1060.008 (2.70.2) o0.0750.008 (o1.90.2) Z-Bend Lead Configuration 0.0510.004 (1.30.1) 0.1060.008 (2.70.2) Gull Wing Lead Configuration 0.0550.004 (1.40.1) 0.0290.004 (0.750.1) Yoke Lead Configuration 0.0980.004 (2.50.1) Emitter 0.0060.002 (0.150.05) 0.1850.008 (4.70.2) 0.2910.008 (7.40.2) (c)2011 Fairchild Semiconductor Corporation QSB363C Rev. 1.0.3 0.0290.004 (0.750.1) 0.0510.004 (1.30.1) 0.1060.008 (2.70.2) 0.0430.008 0.0550.008 (1.10.2) (1.40.2) R0.031.004 (0.80.1) 0.0250.004 (0.650.1) R0.016.004 (0.40.1) 0.0160.004 (0.40.1) 0.0200.004 (0.50.1) CL CL 0.0790.008 (2.00.2) o0.0750.008 (1.90.2) 0.0550.004 (1.40.1) www.fairchildsemi.com 4 QSB363C -- Subminiature Plastic Silicon Infrared Phototransistor Package Dimensions AccuPowerTM Auto-SPMTM Build it NowTM CorePLUSTM CorePOWERTM CROSSVOLTTM CTLTM Current Transfer LogicTM DEUXPEED(R) Dual CoolTM EcoSPARK(R) EfficientMaxTM ESBCTM (R) (R) Fairchild Fairchild Semiconductor(R) FACT Quiet SeriesTM FACT(R) FAST(R) FastvCoreTM FETBenchTM FlashWriter(R)* FPSTM F-PFSTM (R) FRFET SM Global Power Resource Green FPSTM Green FPSTM e-SeriesTM GmaxTM GTOTM IntelliMAXTM ISOPLANARTM MegaBuckTM MICROCOUPLERTM MicroFETTM MicroPakTM MicroPak2TM MillerDriveTM MotionMaxTM Motion-SPMTM OptoHiTTM OPTOLOGIC(R) OPTOPLANAR(R) (R) PowerTrench(R) PowerXSTM Programmable Active DroopTM QFET(R) QSTM Quiet SeriesTM RapidConfigureTM TM Saving our world, 1mW/W/kW at a timeTM SignalWiseTM SmartMaxTM SMART STARTTM SPM(R) STEALTHTM SuperFET(R) SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SupreMOS(R) SyncFETTM Sync-LockTM (R) PDP SPMTM * Power-SPMTM * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. The Power Franchise(R) The Right Technology for Your SuccessTM TinyBoostTM TinyBuckTM TinyCalcTM TinyLogic(R) TINYOPTOTM TinyPowerTM TinyPWMTM TinyWireTM TriFault DetectTM TRUECURRENTTM* SerDesTM UHC(R) Ultra FRFETTM UniFETTM VCXTM VisualMaxTM XSTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDiS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDiS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Advance Information Formative / In Design Preliminary First Production No Identification Needed Full Production Obsolete Not In Production Definition Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I51 (c)2011 Fairchild Semiconductor Corporation QSB363C Rev. 1.0.3 www.fairchildsemi.com 5 QSB363C -- Subminiature Plastic Silicon Infrared Phototransistor TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks.